JorgeB

Moderators
 View Profile  See their activity

  • Posts

    61290

  • Joined

  • Last visited

  • Days Won

    642

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Try changing the GUI theme to a different one, if it helps try then changing back.
  2. JorgeB
    Unassign means stop the array, click the device and set to none. There's no mover involved in this, you'll known when it's done when you can stop the array, you can also monitor the pool activity.
  3. JorgeB
    Deleting those files will delete all the users, technically you only need to delete one, but not sure which one stores the users, I believe it's config/passwd if you want to try just that one.
  4. JorgeB
    Swap m.2 slots between the devices and see if the issue follows the device, you should run a scrub once both are online.
  5. JorgeB
    Disk dropped offline and reconnected, SMART looks OK, most likely a power/connection problem.
  6. JorgeB
    Rebuild won't help with filesystem issues.
  7. JorgeB
    Try a different flash drive, you can also disconnect all SATA devices to see if that makes a difference.
  8. JorgeB
    Are you using v6.10 or v6.11, SMB performance improved a lot on v6.11
  9. JorgeB
    Still doesn't look look a disk problem, though it could be, but I would first try connecting that drive to the onboard SATA ports to rule out any controller compatibility issue.
  10. JorgeB
    If you can have all devices connected at the same time add the NVMe device to the pool, once the balance finishes you can remove the SATA devices form the pool, one by one, just unassign one of them and start the array, when the balance finishes repeat for the other one.
  11. JorgeB
    That won't help if you can't get in the board BIOS, do a CMOS reset and/or remove all add-on cards.
  12. JorgeB
    The type of error, when it's a media error the error it's usually different, also this: Dec 30 07:44:07 Server kernel: sd 7:0:8:0: Power-on or device reset occurred
  13. JorgeB
    Sorry, my bad, the problem was with users not shares, try this: https://wiki.unraid.net/Manual/Troubleshooting#Lost_root_Password Note that you'll need to recreate the users after doing that.
  14. JorgeB
    Rename all plg files to bak (/boot/config/plugins) then start renaming them back one by one to see if you can find the culprit.
  15. JorgeB
    Post new diags after array start.
  16. JorgeB
    This looks more like a USB problem, not a disk problem.
  17. JorgeB
    I meant for the backup share, so backup.cfg, do you only have that one starting with a b?
  18. JorgeB
    Nothing obvious that I can see, if you go to /boot/config/shares do you see that garbled backup share cfg? Do you have a recent flash drive backup?
  19. JorgeB
    Make sure the it's using a USB 2.0 port and reboot, if you still see errors after that post the diagnostics.
  20. JorgeB
    Diags are after rebooting so we can't see what happened, but the disk looks OK and the UDMA CRC errors suggest a SATA cable problem, replace that cable and since the emulated disk is mounting and assuming contents look correct you can then rebuild on top. https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself
  21. JorgeB
    You can do it manually, with for example Midnight Commander (mc on the console) or the Dynamix File Manager plugin, make sure you move the data form disk share to disk share, you can also use the Unbalance plugin.
  22. JorgeB
    Please post the diagnostics.
  23. JorgeB
    Start here: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173
  24. JorgeB
    Format is never part of a rebuild, check filesystem on both disks.
  25. JorgeB
    Test completed on both so disks are OK for now, keep monitoring.