JorgeB

Moderators
  • Posts

    60374
  • Joined

  • Last visited

  • Days Won

    630

Community Answers

  1. JorgeB's post in 35TB vdisk for windows 11 abnormally slow was marked as the answer   
    A vdisk on HDDs is always going to be slow, a couple of things that may help a little:
     
    -create a small disk for the OS on SSD storage, and set the pool as a second volume
    -if usins raidz try mirrors if possible
    -use a zvol instead
     
  2. JorgeB's post in Problem after flash drive died was marked as the answer   
    Unassign cache, start array, stop array, reassign cache, start array, current pool should be imported, if it's not post diags.
  3. JorgeB's post in HELP! SERVER CRASHING EVERY FEW (MINUTES TO HOURS) was marked as the answer   
    Start here:
    https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173
     
  4. JorgeB's post in 6.12.3 Cache drive shows as Unmountable: Unsupported or no file system was marked as the answer   
    If the log tree is the only problem this may help:
     
    btrfs rescue zero-log /dev/nvme0n1p1  
    Then re-start the array and post new diags.
  5. JorgeB's post in Server Restarting Overnight was marked as the answer   
    Not sure this is the problem, but it is a problem, the only issue I see logged are controller issues:
     
    Sep 12 03:46:59 Computron kernel: ata8.15: PMP revalidation failed (errno=-5) Sep 12 03:46:59 Computron kernel: ata8.15: limiting SATA link speed to <unknown> Sep 12 03:47:00 Computron kernel: ahci 0000:07:00.0: AHCI controller unavailable! Sep 12 03:47:01 Computron kernel: ata7.15: qc timeout after 3000 msecs (cmd 0xe4) Sep 12 03:47:02 Computron kernel: ahci 0000:07:00.0: AHCI controller unavailable! Sep 12 03:47:02 Computron kernel: ata7.15: failed to read PMP GSCR[0] (Emask=0x4) Sep 12 03:47:02 Computron kernel: ata7.15: PMP revalidation failed (errno=-5) Sep 12 03:47:02 Computron kernel: ata7.15: limiting SATA link speed to <unknown> Sep 12 03:47:03 Computron kernel: ahci 0000:07:00.0: AHCI controller unavailable! Sep 12 03:47:06 Computron kernel: ata8.15: failed to resume link (SControl FFFFFFFF) Sep 12 03:47:08 Computron kernel: ata8.15: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF)  
    Avoid controllers with SATA port multipliers:
     
  6. JorgeB's post in Unraid crashes and must be turned off and back on again was marked as the answer   
    Sep  5 21:39:59 Tower kernel: BTRFS: error (device sdc1: state A) in convert_free_space_to_extents:466: errno=-5 IO failure Sep  5 21:39:59 Tower kernel: BTRFS info (device sdc1: state EA): forced readonly  
    Cache filesystem has issues, first thing I recommend is to backup and reformat the pool.
  7. JorgeB's post in Is anyone running windows 24/7 was marked as the answer   
    I run 3 Windows VMs 24/7, many times for over a month, usually only reboot to update Unraid and/or some server maintenance.
  8. JorgeB's post in Repeated kernel panics during high-CPU usage states was marked as the answer   
    Based on the screenshot if may be the macvlan issue, but post the persistent syslog when you have it to confirm. If it's the macvlan issue switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)).
  9. JorgeB's post in Upgrade to 6.12.4 with some issues starting array and ghost array was marked as the answer   
    logs#011 Sep 10 22:11:54 Backup emhttpd:    /dev/nvme2n1p1  ONLINE       0     0     0 Sep 10 22:11:54 Backup emhttpd:    /dev/nvme3n1p1  ONLINE       0     0     0 These NVMe devices should also be assigned to the pool, unassign all pool devices, start array (it should start now, but it may require a reboot first), then stop array, re-assign all the pool devices including the logs vdev in the last slots (leave the pool set to auto), start array.
     
     
  10. JorgeB's post in Bunch of errors when I start up was marked as the answer   
    Try this:
    https://forums.unraid.net/topic/118286-nvme-drives-throwing-errors-filling-logs-instantly-how-to-resolve/?do=findComment&comment=1165009
     
  11. JorgeB's post in Create Cache pool with two different sized drives was marked as the answer   
    https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=480421
     
  12. JorgeB's post in UNRAID API ERROR API KEY : NETWORK ERROR was marked as the answer   
    You can, or even over SMB, if the flash drive is shared.
  13. JorgeB's post in DEVICE IS DISABLED, CONTENTS EMULATED - SMART looks ok, what can I do ? was marked as the answer   
    Disk has pending sectors and a failed SMART test, it should be replaced.
     
    Yes, it uses parity plus the other disks to emulated the missing disk's content.
     
  14. JorgeB's post in Cannot login - No login page was marked as the answer   
    There are macvlan call traces, change the docker network to ipvlan, try rebooting on the console by typing 'reboot' if the GUI doesn't work.
     
    Also need to check filesystem for disk1.
  15. JorgeB's post in How do I move from NTFS to Unraid XFS? was marked as the answer   
    That likely won't work, Unraid requires a specific partition layout and MBR signature, IMHO best bet would be for you to empty one of the disks by moving  data to the other ones, let Unraid format that disk XFS, then you can use UD plugin to move the data from one of the NTFS disks, then add another one and so on.
  16. JorgeB's post in Upgraded to 6.12.3 and now I get system freezes was marked as the answer   
    See the release notes, specifically this part:
    https://docs.unraid.net/unraid-os/release-notes/6.12.0#crashes-related-to-i915-driver
  17. JorgeB's post in WEBUI Extremely slow after about 5 minutes and sometimes crashes the whole IP was marked as the answer   
    Btrfs is detecting data corruption, start by running memtest.
  18. JorgeB's post in UNRAID Version: 6.12.3 blinking cursor was marked as the answer   
    You can enable the iGPU and see if you get an output there.
  19. JorgeB's post in During pairy build - Parity drive crashed / died and took two other drives with it was marked as the answer   
    Run it again without -n or nothing will be done.
  20. JorgeB's post in Update 6.12.4 macvlan change required if no errors ! was marked as the answer   
    Yes, not all users have the macvlan issue, if you do after updating then change to ipvlan.
  21. JorgeB's post in 500 error - Cannot access UI externally or from Safe Mode was marked as the answer   
    I would backup current flash drive, recreate it and then restore just the bare minimum, like super.dat and pools folder for the assignments, the key file, and the docker user templates folder, then boot to confirm it's still working, and if yes either reconfigure the rest of the server or restore a few files at a time from the backup (config folder only) until you find the culprit.
  22. JorgeB's post in USB disk enclosure broke, disk now unmountable was marked as the answer   
    You will need to backup and then let Unraid re-format the disk outside the enclosure, then restore the data.
  23. JorgeB's post in Moving Existing Array/Disk Shelf to New UnRAID license + server hardware while keeping data intact. was marked as the answer   
    Correct, assuming no RAID controllers involved before or after.
  24. JorgeB's post in Unmountable: Unsupported partition layout after reboot was marked as the answer   
    The partition doesn't exist, you can try using the free testdisk util to see if it can be recovered.
  25. JorgeB's post in 2x10TB New Drives - Faulty? Parity was working and preclear good on the second. Now won't Add to Array was marked as the answer   
    The 10TB drive is not even giving a valid SMART report, if cables and controllers were swapped it's likely a bad drive.