jevans04

It is super easy to replace your cache drive. Stop Docker. Copy the contents of your cache drive to somewhere temporary on your array. Remove the old cache drive, install the new cache drive. Copy you cache data contents back to the new cache drive. Restart Docker.

Brian, If you are going to make an update to MyMain, then you could also add the size of a 2.5TB drive: 2,441,890,532

Under the Settings tab, click on Share Settings. From there you can specify the settings for the "Mover" for how often the files from the cache drive are moved to the array. You can also manually start the Mover to move the files now.

Note that you should only specify Included disks or Excluded disks, not both. Also there is a global User Share settings page where you can Enable/Disable User Shares and you can Include or Exclude disks from all of your User Shares. 1) Please verify you have User Shares "Enabled" 2) Please verify that the Included and Excluded fields are both blank http://lime-technology.com/setting-up-your-file-structure-and-user-shares-on-unraid/

Look at this: http://lime-technology.com/forum/index.php?topic=36622.msg349384#msg349384

Also, you say "I have unRAID basic with 3 data drives." You have an unregistered flash drive, which means you are limited to 2 data drives and 1 parity drive. Did you buy a license for unRAID? Did you put the license on the flash drive in the config folder?

This is in your syslog for your flash drive: Feb 6 08:31:59 Tower kernel: FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

A couple of suggestions: [*] Try updating the plugins, they both show an update is available. [*] On the SABnzbd settings, you could try disabling "Show storage memory usage". You SABnzbd config directory is quite large (27 GB). Maybe the size is being calculated during boot up and resulting in the delay? Note: I had to disable the "Show storage memory usage" option in my Plex plugin config because of the large size of my Plex database (40 GB) because it was resulting in slow load times of the webGUI settings page. See 4th bullet in the Notes section here: http://lime-technology.com/forum/index.php?topic=33341.msg306949#msg306949

Can you post a screenshot of the unRaid webGui settings page for both Sickbeard and SABnzbd? Maybe there is something in the configuration that is causing your problems.

Trurl, There is actually a 16 minute gap between when SABnzbd starts, and the next line when SickBeard starts and the array SMB service begins. Jang430, What plugins are you using for SABnzbd and SickBeard? Are you using the latest plugin versions from Phaze? http://lime-technology.com/forum/index.php?topic=33341.0 I would suggest replacing your SABnzbd and SickBeard plugins with the Phaze versions.

I noticed that your Dynamix Plugin Control plugin is in the wrong location on your flash drive. It should be located in /boot/config/plugins, not /boot/plugins. Not sure if this is causing you any issues, but it is preventing that plugin from installing. Jan 27 05:40:42 Allan logger: Installing system plugins Jan 27 05:40:42 Allan logger: installing plugin: dynamix.plugin.control-2.1.1-noarch-bergware Jan 27 05:40:42 Allan logger: file /tmp/plugin-startup: successfully wrote INLINE file contents Jan 27 05:40:42 Allan logger: /bin/bash /tmp/plugin-startup ... missing Dynamix webGui plugin !!! Jan 27 05:40:42 Allan logger: failed The log indicates that Sickbeard is installing without errors. If you go to the unRaid WebGui Settings page, can you bring up the config page for the Sickbeard plugin? Can you start Sickbeard from there?

OpenPlex is an OSX program that installs PlexConnect. What you want is a plugin to install PlexConnect on unRaid. There is an old plugin for that. It is the last non-Phaze plugin that I am still running. Maybe Phaze can update that plugin: http://lime-technology.com/forum/index.php?topic=31530.0

I thought that came built in now with v6.12? Or would the stand-alone plugin offer different info? There are additional plugins you can add to Dynamix to add other features. See here: http://lime-technology.com/forum/index.php?topic=36543.0

My recommendation (as a former WDTV user): 1) Install Plex on your server 2) Buy AppleTV devices for all your TVs 3) Install PlexConnect on your server to allow the AppleTVs to play media from Plex 4) Install the Plex client on your Android devices 5) Gather up all your WDTVs devices and deposit them in the nearest garbage bin (or donate them to friends like I did) 6) Enjoy Plex and wonder how you ever lived without it. Seriously. Watching videos using a WDTV compared to using Plex is like using a quill and ink well to write a letter compared to using a computer word processor.

The sickbeard_alt plugin allows you to install a different repo while also running sickbeard. So you can install SickRage which grabs data from TVRage. But you have to choose a different repo from plugin settings webgui page. http://lime-technology.com/forum/index.php?topic=33341.msg346543#msg346543

You can install Sickrage using Phaze's Sickbeard-alt plugin. http://lime-technology.com/forum/index.php?topic=33341.0

Or you could try to repair the errors. http://lime-technology.com/wiki/index.php/Check_Disk_Filesystems

Do you have any data on your cache drive you need to save/keep? If not, you could just format it and start over with it.

It looks like there is an error with your cache drive, and is mounting the disk as Read Only. This is why the plugins can't install to your cache drive. Jan 7 20:43:27 Tower emhttp: shcmd (24): mkdir /mnt/cache Jan 7 20:43:27 Tower emhttp: shcmd (25): set -o pipefail ; mount -t reiserfs -o user_xattr,acl,noatime,nodiratime /dev/sdb1 /mnt/cache |& logger Jan 7 20:43:28 Tower kernel: REISERFS error (device sdb1): vs-4080 _reiserfs_free_block: block 27689288: bit already cleared Jan 7 20:43:28 Tower kernel: REISERFS (device sdb1): Remounting filesystem read-only

Go back and read the first post in this thread, specifically the section labeled: Unraid 6 Beta 12+ GUI fix

This issue is on the Roadmap for future fix/change. http://lime-technology.com/forum/index.php?topic=35690

I am looking at this case to upgrade my current system too. It would hold 3 of the Norco's. http://www.newegg.com/Product/Product.aspx?Item=N82E16811129021

I have a AMD Athlon II X2 270 Regor Dual-Core 3.4GHz Socket AM3 65W Desktop Processor sitting in a box. Lightly used before I upgraded to AMD FX-8350. http://www.newegg.com/Product/Product.aspx?Item=N82E16819103953

I was happy to help and glad to hear it's working now.

I think you may have a certificate issue. Delete any certificates you may have loaded on the AppleTV. 1. Go to the AppleTV settings menu. 2. Select “General” then scroll the cursor down to highlight “Send Data To Apple” and set to "No". 3. With "Send Data To Apple" highlighted, press “Play” (not the normal “Select” button) 4. Highlight any profiles that are shown, press Select, and then "Remove Profile" Generate new certificates following this guide: https://github.com/iBaa/PlexConnect/wiki/Install-Guide-Windows-Certificates Make sure to copy the new certificates to your PlexConnect install folder and delete any existing older certificates you created Install the new certificate on your AppleTV: 1. Go to the AppleTV settings menu. 2. Select “General” then scroll the cursor down to highlight “Send Data To Apple” and set to "No". 3. With "Send Data To Apple" highlighted, press “Play” (not the normal “Select” button) and you will be prompted to add a profile. 4. Enter (without the quotes): "192.168.123.80/trailers.cer" From the PlexConnect WebGUI restart PlexConnect Try launching Trailers on the AppleTV