cybrnook

I think "--ignore-existing" would be the switch you want in your rssync command. https://linux.die.net/man/1/rsync "--ignore-existing skip updating files that exist on receiver"

Thanks @Squid and @AndrewZ all taken care of.

Also have the same issue. Email associated is a very old one, and I also would like to update to a newer one. But, I ran into the same loop you did. Hopefully we get some feedback on how to fix this.

Thanks for the super fast response!

@Djoss has anything changed recently with your docker images? I run Handbrake, FileBot and MKVToolNix and noticed recently that both Filebot and MKVToolNix both can't seem to see any updates, however Handbrake works fine? This has been for about a week now. These are the Docker URL's and repo's I have set: Repo: jlesage/filebot:latest URL: https://hub.docker.com/r/jlesage/filebot/ Repo: jlesage/mkvtoolnix:latest URL: https://hub.docker.com/r/jlesage/mkvtoolnix/ Repo: jlesage/handbrake:latest URL: https://hub.docker.com/r/jlesage/handbrake/

Sounds familiar. Maybe it's just the version of iGPU those older Xeon's had at the time that are being problematic. I read a few threads around the forum here that mention random freezing issues with iGPU, which is what turned me on to the idea. I noticed during boot a few messages about i915 that I have never seen before when the GPU was enabled, but chose to brush it off since I wasn't passing it through to any containers. Even so, my system would sporadically freeze, not crash, not really kernel panic but just freeze. It would take anywhere from 30 minutes to a day to two days maybe, but surely the freeze would come. Went into BIOS and disabled the integrated GPU and all has been well since.

To follow this up, I ended up upgrading again to 6.11.5 using this Xeon E3-1275v6 and it crashed froze. I went into BIOS and disabled onboard gpu (i915) and that seems to have been the trick, even though I was not passing the device to anything for HW acceleration.

I want to add that in a pinch, I recently moved my install over from my AMD based hardware to an older 1151 socket based intel setup (kaby lake xeon on a supermicro board) and noticed hard freezes in unraid. Unraid wasn't crashing, hence no logs were generated, it was just freezing. I reverted down to 6.10.3 and the system has now been stable for 24 hours. Previously I was seeing freezing anywhere from during boot to maybe 5 minutes after boot, very erratic. So, in short on AMD based hardware 6.11.x was operating without an issue for me. On Intel based hw the 6.11.x is seemingly freezing.

Almost at 48 hours on 6.11.5, no issues.

You too buddy!

DONE!

That's right.

Just want to throw out that I use the 32GB FIT and haven't had any issues with it, might be worth circling back to once you get all your other issues sorted out:

How can I send you a couple beers?

@limetech Just wanted to say thanks again, all seems to be working well. Got some tuning to do on my side, switch level, but all seems to be within spec. Seems it was the driver....

@limetech thanks for including the latest out of tree driver, so far so good with a basic test using a 2.5Gb nic. Tomorrow will test more in depth with 10Gb, was just too excited to wait:

Looking at the current changelog for intel's ixgbe driver, seems they already added support for 5.16, so we should at least be good for this go round: https://sourceforge.net/projects/e1000/files/ixgbe stable/5.14.6/ The readme for igb is not quite as specific.

Fair enough, generous of you and very much appreciated. At least when RC4 comes out I'll know that my perf issues were driver related or not and we can move forward. If you decide to revert back post RC4 to the old in-tree, then either I stick on RC4 and I wait for drivers as plugins or I continue to have to fallback to an add on nic for the time being. For anyone who has issues with RC4 related to the latest intel driver in rc4, I apologize in advance right now 🥺 However, I would like to think of it as nothing but a positive change.

Thanks for the update @limetech, I guess in the future when 6.11 comes out and the move to drivers as plugins becomes available, then knowing what driver you're using would be more obvious. Making the ability to pick and choose for comparison much easier to help weed out issues or regressions. In my work with AsRock currently, is there any idea what "version" the current "in-tree" driver is, let's say for the current RC3 release which seems to be using the 5.15.27 linux kernel, is there some command I can run to pull a version string or revision number from it? Or is it really just an unknown?

Yep, all clean after uninstall UD and UD Addon (and a reboot):

I uninstalled UD and UD Add on and noticed strange folders getting removed (before and after). I need to reboot to see now if rootshare comes back.

What about recycle bin?

I also am getting the same warning this morning. Just upgraded to RC3, and I have UD as well as Recycle Bin installed and updated both plugins this morning. I assume you have recycle bin or UD installed? Looking at todays release notes, it specifically calls out root share: Maybe @dlandoncould take a peek? EDIT: Actually, looking at the UD page, seems it's a new functionality added. I guess it's just FCP that needs to be updated.

Anyone have any idea? @Squid @bonienl @limetech

Maybe @Squid @bonienl @limetech you guys could help point me in the right direction?