-
Posts
1209 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by interwebtech
-
-
This is combined "possible bug" report and request for guidance on correct settings.
Before a recent change in behavior I had Mover set to not run if a parity check (it also applied to data rebuild) was in progress. I prefer this method.
The new behavior has the parity check pause then letting mover run and then resuming the parity check once mover completes. Notifications sent at each step of the process. I experienced this recently with my scheduled quarterly automatic parity check.
Fast forward to now... I am at the tail end of a data rebuild (larger disks replacing old array members) and I notice the behavior is slightly different. Mover runs on schedule but data rebuild is NOT paused (at least GUI doesn't indicate it is). No notifications sent (logical since no pause occurred?). Rebuild drops to 3mbps and shows completion expected in several days. Note it was at 97.5% complete when this occurred. I let this process continue figuring maybe an hour or so to move roughly 50GBs (guessing). Several hours later and its still not done yet. This is when I noticed that the rebuild had not been paused before the mover started. At that time I manually paused it. Files were finally moving at a faster pace and should be done shortly. Side note I earlier shut off plex docker & Roon server; external NUC reads unRaid share where music files live; when I noticed they were both running file read/processing maintenance that was likely causing some contentention with the rebuild AND mover also running.
Okay so bug report is regarding the different behavior between a parity check vs data rebuild and scheduled Mover runs. I would think they would be consistent (pause, send notifications, etc).
Second, how to I configure this new behaviour to NOT pause parity checks or data rebuilds for Mover runs. I prefer the array operations complete as quickly as possible. I want Mover disabled when the array is doing either of these. It used to be a single checkbox that did that.Diagnostics attached. Note these were gathered while data rebuild was manually paused and mover was finishing up its run.
tower-diagnostics-20230717-0750.zip
PS. I have the Parity Check Tuning plug-in installed
-
Grats!
- 1
-
9 hours ago, mgutt said:
Please test again
Script completes without error. Thanks!
Unraid Status: 2022-10-10 00:48 Plex Preloader has finished 0 preloaded (from Disk) / 475 skipped (already in RAM)
- 1
-
7 minutes ago, mgutt said:
I updated the script. Should work now.
Error moved but still persists
Script location: /tmp/user.scripts/tmpScripts/Plex_Preloader/script Note that closing this window will abort the execution of this script 2022-10-07 10:16:22 Available RAM: 30G 2022-10-07 10:16:22 Amount of videos that can be preloaded: 482 (each video occupies 61M) 2022-10-07 10:16:22 /tmp/user.scripts/tmpScripts/Plex_Preloader/script: line 106: syntax error near unexpected token `head' 2022-10-07 10:16:22 /tmp/user.scripts/tmpScripts/Plex_Preloader/script: line 106: ` seconds=$(time ( head -c "$preload_head_size" "$file" >/dev/null ) 2>&1 )'
-
Updated to 6.11.1 last night. This morning, Preloader failed with the following error:
Script Starting Oct 07, 2022 07:00.01 Full logs for this script are available at /tmp/user.scripts/tmpScripts/Plex_Preloader/log.txt Script Finished Oct 07, 2022 07:00.03 Full logs for this script are available at /tmp/user.scripts/tmpScripts/Plex_Preloader/log.txt 2022-10-07 07:00:03 Available RAM: 39G 2022-10-07 07:00:03 Amount of videos that can be preloaded: 474 (each video occupies 81M) 2022-10-07 07:00:03 /tmp/user.scripts/tmpScripts/Plex_Preloader/script: line 113: syntax error near unexpected token `head' 2022-10-07 07:00:03 /tmp/user.scripts/tmpScripts/Plex_Preloader/script: line 113: ` seconds=$(time ( head -c "$preload_head_size" "$file" ) 2>&1 1>/dev/null )'
-
FYI I have my parity check set to 90 days so its been a while since it has run. It started automatically last night at 12:20 AM as scheduled. At 12:20 AM tonight I get a notification that the parity check had been PAUSED. Dive into the setting for plugin and see that "Use increments for scheduled Parity Check" had been turned on and the settings had picked up my scheduled parity check start time setting for its "pause time" (unless 00:30 is the default).
I have never turned this on so it must have reverted to this as default in an update since the last scheduled parity check was run. No harm done just startled me as I had never seen that notification before lol. -
2 hours ago, H3is3nb3rg said:
Ok, I got the webui to come up but for whatever reason the username and pass I put in is not accepted. I know it works because I am able to log in to PIA's website with it. I have cleared out cookies and history. Any ideas? Thank you
If you refer to the web page login for the docker webui, try admin/admin than change it.
-
Excellent! I have UI now. Thanks.
-
1 hour ago, binhex said:
whats the ip of the machine you are running the browser from?.
192.168.254.81 laptop
webui link opens up (correct ip for unraid box):
http://192.168.254.70:8080/ -
using PIA/Openvpn. It appears to be running but I can't access webgui. Says it timed out. Log doesn't show any glaringly obvious errors. [redacted] supervisord.log attached.
New to this docker but not new to docker. Thanks for any help getting this up and running. -
-
Logged into server admin just to check on things (issue with Flash Drive being dropped recently) and I happened to notice this block of errors in the log. Is something borked and needs reinstall? Diagnostics attached.
Nov 27 00:51:04 Tower webGUI: Successful login user root from 192.168.254.15 Nov 27 00:51:56 Tower nginx: 2021/11/27 00:51:56 [error] 11634#11634: *1314307 open() "/usr/local/emhttp/status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /status?full&json HTTP/1.1", host: "localhost" Nov 27 00:51:56 Tower nginx: 2021/11/27 00:51:56 [error] 11634#11634: *1314317 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /server-status?format=plain HTTP/1.1", host: "localhost" Nov 27 00:51:56 Tower nginx: 2021/11/27 00:51:56 [error] 11634#11634: *1314326 FastCGI sent in stderr: "Primary script unknown" while reading response header from upstream, client: 127.0.0.1, server: localhost, request: "GET /admin/api.php?version HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "localhost" Nov 27 00:51:56 Tower nginx: 2021/11/27 00:51:56 [error] 11634#11634: *1314332 open() "/usr/local/emhttp/stub_status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /stub_status HTTP/1.1", host: "localhost" Nov 27 00:51:57 Tower nginx: 2021/11/27 00:51:57 [error] 11634#11634: *1314343 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /server-status?auto HTTP/1.1", host: "localhost" Nov 27 00:51:57 Tower nginx: 2021/11/27 00:51:57 [error] 11634#11634: *1314352 open() "/usr/local/emhttp/stub_status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /stub_status HTTP/1.1", host: "localhost" Nov 27 00:51:57 Tower nginx: 2021/11/27 00:51:57 [error] 11634#11634: *1314359 open() "/usr/local/emhttp/status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /status HTTP/1.1", host: "localhost" Nov 27 00:51:57 Tower nginx: 2021/11/27 00:51:57 [error] 11634#11634: *1314367 open() "/usr/local/emhttp/status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /status?full&json HTTP/1.1", host: "localhost" Nov 27 00:52:16 Tower nginx: 2021/11/27 00:52:16 [error] 11634#11634: *1314573 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /server-status?auto HTTP/1.1", host: "localhost" Nov 27 00:52:17 Tower nginx: 2021/11/27 00:52:17 [error] 11634#11634: *1314582 open() "/usr/local/emhttp/us" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /us HTTP/1.1", host: "localhost" Nov 27 00:52:17 Tower nginx: 2021/11/27 00:52:17 [error] 11634#11634: *1314587 open() "/usr/local/emhttp/server-status" failed (2: No such file or directory), client: 127.0.0.1, server: localhost,
-
Rebooted. Everything looks to be okay (dockers, shares, etc. have reappeared). Parity check started due to unable to write to USB at shutdown.
-
ps: email received from server when I ran the diagnostics: "Output from your job 115"
mkdir: cannot create directory '/boot/logs': Input/output error
sed: can't read /tower-diagnostics-20211125-0138/config/go.txt: No such file or directory
Warning: copy(/boot/logs/tower-diagnostics-20211125-0138.zip): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix/scripts/diagnostics on line 570 -
I logged into admin tonight and noticed banner across the top stating "Your flash drive is corrupted or offline." Pulled it out and ran Windows 11 scan/repair. Popped it back in but error banner persists. After futzing around trying to find a backup to restore (news is not good on that, only one I found is from March this year), I pulled the flash and opened it in Windows. I can see all the files in there. I put it back in server and opened the share via network and its empty. Dockers that were already started are still running and accessible (example Plex) but the entire Docker admin is gone. What do I need to do to get this fixed?
Its a fairly new drive (SanDisk 64GB Cruzer Fit USB Flash Drive). Diagnostics attached. -
Turns out its not buggy BIOS but perhaps looking in the wrong place. Pulled from another thread:
root@Tower:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 165
model name : Intel(R) Core(TM) i9-10850K CPU @ 3.60GHz -
3 minutes ago, interwebtech said:
I'm am seeing the same thing.
unraid-api restart
fixed it- 1
-
-
It is running latest BIOS from April.
Correction: F20 released 2021/05/26
Update CPU microcode version 0x34
Update Intel Management Engine Firmware 14.1.53.1617
BIOS update to be compatible with 11th Gen Intel® Core™ Processors
---
mentions 11th gen but I believe mine is 10th gen
reported by unRaid:
Gigabyte Technology Co., Ltd. W480 VISION W , Version x.x
American Megatrends Inc., Version F20
BIOS dated: Mon 19 Apr 2021 12:00:00 AM PDT
-
9 hours ago, bonienl said:
What happens when you explicitly ask for the processor info
dmidecode -t4
No apparent response.
root@Tower:~# dmidecode -t4
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 3.2.0 present.root@Tower:~#
-
15 hours ago, ljm42 said:
root@Tower:~# dmidecode
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 3.2.0 present.
Table at 0x99B45000.Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: F20
Release Date: 04/19/2021
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 32 MB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 5.17Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: W480 VISION W
Version: -CF
Serial Number: Default string
UUID: 035e02d8-04d3-0500-b806-670700080009
Wake-up Type: Power Switch
SKU Number: Default string
Family: W480 MBHandle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: W480 VISION W
Version: x.x
Serial Number: Default string
Asset Tag: Default string
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Default string
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: Default string
Type: Desktop
Lock: Not Present
Version: Default string
Serial Number: Default string
Asset Tag: Default string
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
SKU Number: Default stringHandle 0x0004, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse PortHandle 0x0005, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard PortHandle 0x0006, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: TV Out
External Connector Type: Mini Centronics Type-14
Port Type: OtherHandle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2A
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A CompatibleHandle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2B
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video PortHandle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USBHandle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USBHandle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USBHandle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - TPM HDR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9C1 - PCIE DOCKING CONN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2B3 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C2 - EXT HDMI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3C1 - GMCH FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1D1 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E2 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E4 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E3 - LPC HOT DOCKING
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E1 - SCAN MATRIX
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - LPC SIDE BAND
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8F1 - UNIFIED
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6F1 - LVDS
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - LAI FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2G1 - GFX VID
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1G6 - AC JACK
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: OtherHandle 0x001C, DMI type 9, 17 bytes
System Slot Information
Designation: J6B2
Type: x16 PCI Express
Current Usage: In Use
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:01.0Handle 0x001D, DMI type 9, 17 bytes
System Slot Information
Designation: J6B1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.3Handle 0x001E, DMI type 9, 17 bytes
System Slot Information
Designation: J6D1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.4Handle 0x001F, DMI type 9, 17 bytes
System Slot Information
Designation: J7B1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.5Handle 0x0020, DMI type 9, 17 bytes
System Slot Information
Designation: J8B4
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.6Handle 0x0021, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.Handle 0x0022, DMI type 11, 5 bytes
OEM Strings
String 1: Default stringHandle 0x0023, DMI type 12, 5 bytes
System Configuration Options
Option 1: Default stringHandle 0x0024, DMI type 32, 20 bytes
System Boot Information
Status: No errors detectedHandle 0x0025, DMI type 34, 11 bytes
Management Device
Description: LM78-1
Type: LM78
Address: 0x00000000
Address Type: I/O PortHandle 0x0026, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Motherboard
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: UnknownHandle 0x0027, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6Handle 0x0028, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0025
Component Handle: 0x0026
Threshold Handle: 0x0027Handle 0x0029, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: Motherboard
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: UnknownHandle 0x002A, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6Handle 0x002B, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0025
Component Handle: 0x0029
Threshold Handle: 0x002AHandle 0x002C, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0029
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1Handle 0x002D, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6Handle 0x002E, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0025
Component Handle: 0x002C
Threshold Handle: 0x002DHandle 0x002F, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0029
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Not SpecifiedHandle 0x0030, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6Handle 0x0031, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0025
Component Handle: 0x002F
Threshold Handle: 0x0030Handle 0x0032, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Motherboard
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: UnknownHandle 0x0033, DMI type 36, 16 bytes
Management Device Threshold DataHandle 0x0034, DMI type 35, 11 bytes
Management Device Component
Description: Default string
Management Device Handle: 0x0025
Component Handle: 0x0032
Threshold Handle: 0x0033Handle 0x0035, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: UnknownHandle 0x0036, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: UnknownHandle 0x0037, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0036
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1Handle 0x0038, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: UnknownHandle 0x0039, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Filled By O.E.M.
Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision: To Be Filled By O.E.M.
Max Power Capacity: Unknown
Status: Present, OK
Type: Switching
Input Voltage Range Switching: Auto-switch
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0035
Cooling Device Handle: 0x0037
Input Current Probe Handle: 0x0038Handle 0x003A, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 64 GB
Error Information Handle: Not Provided
Number Of Devices: 4Handle 0x003B, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x003A
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: 04CD
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: F4-4000C19-16GTZR
Rank: 2
Configured Memory Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 5, Hex 0xCD
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 16 GB
Cache Size: None
Logical Size: NoneHandle 0x003C, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x003A
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM1
Bank Locator: BANK 1
Type: DDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: 04CD
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: F4-4000C19-16GTZR
Rank: 2
Configured Memory Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 5, Hex 0xCD
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 16 GB
Cache Size: None
Logical Size: NoneHandle 0x003D, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x003A
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 2
Type: DDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: 04CD
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: F4-4000C19-16GTZR
Rank: 2
Configured Memory Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 5, Hex 0xCD
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 16 GB
Cache Size: None
Logical Size: NoneHandle 0x003E, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x003A
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM1
Bank Locator: BANK 3
Type: DDR4
Type Detail: Synchronous
Speed: 2133 MT/s
Manufacturer: 04CD
Serial Number: 00000000
Asset Tag: 9876543210
Part Number: F4-4000C19-16GTZR
Rank: 2
Configured Memory Speed: 2133 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 5, Hex 0xCD
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 16 GB
Cache Size: None
Logical Size: NoneHandle 0x003F, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x00FFFFFFFFF
Range Size: 64 GB
Physical Array Handle: 0x003A
Partition Width: 4Handle 0x0040, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x003FFFFFFFF
Range Size: 16 GB
Physical Device Handle: 0x003B
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: Unknown
Interleave Position: 1
Interleaved Data Depth: 2Handle 0x0041, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00800000000
Ending Address: 0x00BFFFFFFFF
Range Size: 16 GB
Physical Device Handle: 0x003C
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: Unknown
Interleave Position: 1
Interleaved Data Depth: 2Handle 0x0042, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00400000000
Ending Address: 0x007FFFFFFFF
Range Size: 16 GB
Physical Device Handle: 0x003D
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: Unknown
Interleave Position: 2
Interleaved Data Depth: 2Handle 0x0043, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00C00000000
Ending Address: 0x00FFFFFFFFF
Range Size: 16 GB
Physical Device Handle: 0x003E
Memory Array Mapped Address Handle: 0x003F
Partition Row Position: Unknown
Interleave Position: 2
Interleaved Data Depth: 2Handle 0x0044, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 44 00 24 41 4D 54 00 00 00 00 00 A5 AF 02
C0 00 00 00Handle 0x0045, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 45 00 31 00 00 00 0E 00 00 00 00 00 01 00
F8 00 97 06 00 00 00 00 11 00 00 00 00 00 0E 00
65 04 21 00 00 00 00 00 FE 00 4C 0D 00 00 00 00
00 00 00 00 E0 01 00 00 76 50 72 6F 00 00 00 00Handle 0x0046, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:00.0Handle 0x0047, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Video
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0Handle 0x0048, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 2
Bus Address: 0000:00:12.0Handle 0x0049, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 3
Bus Address: 0000:00:14.0Handle 0x004A, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 4
Bus Address: 0000:00:14.2Handle 0x004B, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 5
Bus Address: 0000:00:16.0Handle 0x004C, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - SATA
Type: SATA Controller
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:17.0Handle 0x004D, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 6
Bus Address: 0000:00:1f.0Handle 0x004E, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 7
Bus Address: 0000:00:1f.4Handle 0x004F, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Other
Type: Other
Status: Enabled
Type Instance: 8
Bus Address: 0000:00:1f.5Handle 0x0050, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard - Ethernet
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:1f.6Handle 0x0051, DMI type 14, 8 bytes
Group Associations
Name: $MEI
Items: 1
0x0000 (OEM-specific)Handle 0x0052, DMI type 219, 106 bytes
OEM-specific Type
Header and Data:
DB 6A 52 00 01 04 01 55 02 00 94 06 81 85 39 30
00 00 00 04 40 00 00 00 00 00 00 00 00 40 80 02
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF 03 00 00 00 80 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
Strings:
MEI1
MEI2
MEI3
MEI4Handle 0x0053, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 53 00 00 00Handle 0x0054, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 15
en|US|iso8859-1
zh|TW|unicode
zh|CN|unicode
ru|RU|iso8859-5
de|DE|iso8859-1
ja|JP|unicode
ko|KR|unicode
es|ES|iso8859-1
fr|FR|iso8859-1
it|IT|iso8859-1
pt|PT|iso8859-1
vi|VI|iso8859-1
id|ID|iso8859-1
tr|TR|iso8859-1
pl|PL|iso8859-1
Currently Installed Language: en|US|iso8859-1Handle 0x0055, DMI type 127, 4 bytes
End Of Table -
I replaced my monitor today and now getting the message "DISABLING IRQ #16" at the console. I was using an old VGA via adapter to HDMI before without issues. New monitor is native 1080P with HDMI connector. Diags attached.
ps. running latest BIOS on mobo.
pss. I actually tried using the DisplayPort connectors on new monitor first but couldn't get a signal so I switched to HDMI. -
deleted
-
After having replaced the motherboard, CPU, and RAM, it appears to be the power supply. Running a parity check to see if it tanks again.
Unraid OS version 6.12.6 available
in Announcements
Posted
Uneventful update. Nothing to report. Thanks team!