mikejp

That would be like... being annoyed with Microsoft because you can't get Windows8 to load on your 486DX4 Just sayin'...

No luck here with my LSI card either... same issues

I've been using the Hitachi 7K3000 (3TB 7200rpm(HDS723030ALA640)), that I ripped from its' external enclosure , for the last 6 or 7 months as my Parity drive with no problems. I don't have any experience with the Seagates...

Now... what to do with them...

As it may well be... If LimeTech would take the 2 minutes, once a week, that it would take to inform the forum ...... Imagine the savings on bandwidth useage

Here's a few pics of how I made mine work for me...

Here's how mine reads from the IPMI interface: Monitoring Sensors Sensor Type Sensor Name Sensor Status Sensor Reading Temperature CPU1 Temp OK 24 degrees C Temperature CPU2 Temp No reading Temperature Sys Temp OK 44 degrees C Voltage CPU1 Vcore OK 1.248 (+/- 0.004) Volts Voltage CPU2 Vcore Below lower non-recoverable threshold 0.448 (+/- 0.004) Volts Voltage CPU1 DIMM OK 1.816 Volts Voltage CPU2 DIMM No reading Voltage MCP55 Vcore OK 1.440 (+/- 0.008) Volts Voltage 1.2V OK 1.128 Volts Voltage 3.3V OK 3.440 Volts Voltage 5V OK 4.872 (+/- 0.012) Volts Voltage 12V OK 12.480 (+/- 0.030) Volts Voltage -12V OK -12.500 (+/- -0.050) Volts Voltage 5VSB OK 4.824 (+/- 0.012) Volts Voltage VBAT OK 3.008 (+/- 0.008) Volts Fan Fan1 OK 1300 RPM Fan Fan2 OK 1300 RPM Fan Fan3 OK 2000 RPM Fan Fan4 OK 2000 RPM Fan Fan5 Below lower non-recoverable threshold 0 RPM Fan Fan6 OK 2000 RPM Fan Fan7 OK 3200 RPM Fan Fan8 Below lower non-recoverable threshold 0 RPM Physical Security Intrusion OK Power Supply Power Supply OK Module / Board CPU Overheat OK Module / Board Thermal Trip0 OK Module / Board Thermal Trip1 OK Don't know if it does you any good ...

Still badly broken on my system(see sig) Went back to 12a, which has been running stable for months...

Just a thought... did you try clearing the CMOS & removing the battery for a while...?

I see he has 5 more for sale... http://www.ebay.com/itm/Custom-Dual-Core-AMD-Opteron-2-0GHz-8GB-DDR2-160GB-IDE-Server-/170810185812?pt=LH_DefaultDomain_0&hash=item27c5149854

I can read mine from the unRAID main page... just clicked on "Flash" to go to the settings page. YMMV

I'd like to get rid of it as one kit if possible. But it depends if anyone is interested in the whole thing. What are you wanting for the whole thing?

I'm interested in the heat sink, & the memory...

http://www.buy.com/prod/kingston-8gb-4gb-x-2-datatraveler-generation-3-g3-usb-flash-drive/217292024.html

No power cords here either Had a few on hand, so not a big deal... The packing left alot to be desired... airbags were not meant to pack something that heavy!! There were only 2 of the 15 or so left unpopped I had to do a little work to the right side so the trays slide easily. Other than that... it's OK. Booted into unRAID with no problems... working great!! It is LOUD though!!... off to the basement with it....

You tried them then... BUMMER!! I guess I won't even bother unboxing mine when they get here then Are you confusing Hyper THRED & Hyper TRANSPORT...? Here are part of the specs for those processors:

Looking at the picture(looks same as mine) I done a quick google search & came up with this from the SuperMicro website: :( :( :(

Glad they worked for you... Happy I could help...

I have the M4A785TD-V I'm using in a back up box. It's running 13 WD Black 1.5TB drives thru the M/B & a BR10i. The BIOS setup should be the same... The Emulation is set to AUTO Under "Boot Settings", Hard Disk Drives, I have the 1st Drive set to USB:Kingston Reader[sanDisk U3 Cruzer for you], 2nd Drive to Disabled. Under "Boot Settings", Boot Device Priority, I have set 1st Boot Device to USB:Kingston Reader[sanDisk U3 Cruzer for you], all other boot devices disabled. Hope these settings help...

...couldn't help myself ... U.C.D. ?? I've been watching for a good deal on something for a test/backup server This should do fine...

I had the same problem when I installed them this morning... After removing, replacing, & rebooting... I realized I hadn't enabled them in the "Stats Settings" on the Settings page.

WAY NICE... thanks...

peter_sm... thanks for posting your updated version! Tried it this morning on my test server, which has a BR10i,... didn't work for me Had the same problems on mine as the rest... I'm sticking with b12a... it works with my hardware

DOH (slaps forehead).. !!! WAY NICE

Hey _ant, Nice work... keep it up!! I do have a problem with the stats package though... after installing I get this error message at the bottom of the page: "Fatal error: Cannot redeclare device_info() (previously declared in /usr/local/emhttp/plugins/simpleFeatures/DiskStats.php:12) in /usr/local/emhttp/plugins/simpleFeatures/unRAIDStats.php on line 32 " Any ideas..? syslog.txt