preproman

Does anyone know if there is a Docker crated for the Lumin Music Server. Somehow QNAP and Sinology are comparable. Thanks Darryl

OK makes sense to me. I will do the upgrade first. Thanks for the info. Darryl

Thanks - I will I will upgrade next..

Version 5.0-rc11 Are there any procedures for swapping parity drives? Going from a 4TB to a 6TB. Thanks

Got it. Thanks that's what I needed..

I'm changing the disk in drive 20 to drive 22. How do I get drive 20 to clear out all info from the disk I removed? I stopped the array, unassigned it, started the array backup. But the info is still there i.e.. 4tb and what's left on the disk. How do I get it to be clear? Below is the error i'm getting. I need to clear the "not installed" on drive 20 so I can add the disk to drive 22. If you know what I'm saying.. "You may not add new disks when there exists missing, wrong, or disabled disk(s)."

Sorry about that. Yes, I'm using the 5.0-beta12 version.

I would like to clear out two drive spots. How do I re build the parity to do so? Thanks

What should I do with the disk: Return it? Run it again?

Syslog is attached. Yes they all show up in the Bios. I'm fine with the drives being cleared. I have backups on USB external drives. "You can un-assign all the failed drives, and then set a new disk configuration, but if you then try to re-assign them to an existing array they will be cleared UNLESS you set a new disk configuration immediately before adding them each in turn." How do I do this? syslog-2012-09-08.txt

Hello, I have got 1 red ball after another out of nowhere. Now I have a total of 4. I guess it must be coming from the re booting of the server multiple times. I know I need to get some disk drives. (I have a few on order). Right now I want to get the server to list all 4 of these drives as unassigned so it can come up and I can still use it. How do I clear them out and get them listed as unassigned? version: 5.0-beta12 Is this a good time to upgrade the version? syslog attached. syslog-2012-09-08.txt

Hello, I need instruction on how to run reiserfsck with the --rebuild-sb. I ran reiserfsck --check. It told me I need to run rebuild-sb. version: 5.0-beta12 Any instructions? Darryl

Yep. It work. I did it from the console. I was trying to delete it from a Mac not Windows.. Thanks for the help

Good news. I ran --check. It told me to run --rebuild-tree. I ran it early this morning, got back all is good. Now, how can i delete the lost+found fold on the drive? It has 0 items inside but yet it says I don't have permission to do this operation.

Got home today after work to find multiple errors on the server monitor. This is after a rebuild of disk 6 last night and a parity check this morning. Reiserfs error (device md6): vs-13070 reiserfs_read_locked_inode: i/o failure ocurred trying to find stat data of [3188 3189 0x0 SD] Syslog is attached. syslog-2012-08-01.txt.zip

Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata9: sas eh calling libata port error handler (Errors) Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata10: sas eh calling libata port error handler (Errors) Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata11: sas eh calling libata port error handler (Errors) Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata12: sas eh calling libata port error handler (Errors) Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata13: sas eh calling libata port error handler (Errors) Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata14: sas eh calling libata port error handler (Errors) Jan 30 16:54:18 Darryl_Jacksons_Tower kernel: ata15: sas eh calling libata port error handler (Errors) I got about 100 of these same errors over and over again. Are they threatening in any way?

How do I stop it?

Why on it's own and all by it's self my cache drive is moving files off of it to other drives? I don't have anything telling it to do this. It's putting movies own drives that's not a part of my share but has the most space on them. How to I stop this? unRAID 5.0-beta12 syslog is attached. syslog-2011-11-11.txt.zip

On my Disk#3 I have two folders = Movies and TV Shows. I can write, replace, delete and what ever. I have full rights to the movie folder. However I have only read access to the TV Shows folder. How can this happen. How do I fix it. I ran the new permissions utility > didn't work. unRaid 5.0-beta12

workgroup is set to workgroup. Should I give it my own name?

unRaid 5.0b-12 - I just set my shares up in this version. I can't see the Tower (server) in Windows 7 networks. In the SMB settings what should local master be set to on or off? What other settings should I make sure are set or correct to enable me to see the Tower under networks? Thanks..

One of your applications is probably still running. I thought that may br it as well. So I made sure everything was stopped.. plex, Trans., Sab, Sick, couch, pyload all stopped. still not able to stop the array. can we get the output of a ps -ef OK - that will have to be later this evening. @prostuff1 Here's the deal. I ran all the stop scripts from within unMenu - unMenu reported everything stopped ok, including Trans. I went out to the command line and typed ps -ef - it reported Trans. still running at 11096. I typed kill 11096 ran ps -ef again. Trans. no longer there. Now am able to stop the array. I think the stop script for Trans. in unMenu is not working correctly.

One of your applications is probably still running. I thought that may br it as well. So I made sure everything was stopped.. plex, Trans., Sab, Sick, couch, pyload all stopped. still not able to stop the array. can we get the output of a ps -ef OK - that will have to be later this evening.

One of your applications is probably still running. I thought that may br it as well. So I made sure everything was stopped.. plex, Trans., Sab, Sick, couch, pyload all stopped. still not able to stop the array.

unRaid 5b.12 It keeps saying unmounting disk, Retry unmounting disk, Retry unmounting disk. It says this over and over. Syslog is attached. unRaid_syslog.zip