sacretagent
-
Posts
943 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by sacretagent
-
-
ok this server has been running for more then a year with the current configuration but due to some electricity problems (aka a snake that got roasted on a transformator in the village) did this server lose his bios settings and now for the love of god i can't get him to boot from the USB stick.....
i can if i remove 2 sata controller but then of course i don't have all my disks lol....
i tried everything i can think off but been busy now for like 15 hours and i can't get him to boot from the usb with all 16 disks installed ....
bios shows only 12 disks.... and the usb doesn't show in these 12 disks.... only if i disable 2 onboard controllers or remove 2 sata controller physically it will show me the usb in the list
but when i enable the controllers again or insert the 2 removed ones then next boot the usb is missing again....
it was working and i remember i had similar problem when i set this up but i forgot what the solution was a year ago
so i was hoping if somebody knows how to solve this.....
here are the bios settings screens
https://drive.google.com/file/d/1-5MC436EH5eKFiVKVLlNXHPvJCgx3vqi/view?usp=sharing
https://drive.google.com/file/d/1-FhypBc7UpSqMNXlXiVDBLY9p-hIaxFd/view?usp=sharing
https://drive.google.com/file/d/1-S6q9zmdyhq-JRslEGJOWE7Z9TVZlQej/view?usp=sharing
https://drive.google.com/file/d/1YGUg_XfvtjVwFRS7yHFBcH1ZsS0hj4ve/view?usp=sharing
https://drive.google.com/file/d/1-D8I6_AK6M21WvMSBne3PpZAscMv2YCI/view?usp=sharing
https://drive.google.com/file/d/1-f-b5SnVEzxSthGvMSn4RkxdFJD1_Qx3/view?usp=sharing
https://drive.google.com/file/d/1-_iEyaBrbWTfdbDKRwUsbyyQHUYsFBJq/view?usp=sharing
https://drive.google.com/file/d/1-Jk6TQWQn1I-tPJaySZ-oRO6FmygAl72/view?usp=sharing -
mm restarted docker service and now it works ,.... weird
-
last update from today won't start up .. get an error 403 or so
-
newest rutorrent upgrade has changed parameters... rtorrent will not start... .. can you please advise on the new parameters...
old ones are peer_exchange and use_udp_trackers.... had to # them before rtorrent would start....
-
28 minutes ago, Frank1940 said:
Why not just use the Log button on the header/side bar?
as that requires your unraid gui to respond...
with unmenu the logs were refreshed every 2 minutes and even when your server hung most of the time you were able to see on the unmenu screen what happened ...
anyway we will have to adjust as always....
but the spacing on this new gui is to wide
can we get an option to make it like before ?
-
Seems this update is the death of unmenu ? ;(
upgraded one server .... had a lot of issues with your port 443 and one of my dockers ... which i managed to change by changing the dockers IP
but unmenu is a mess now ....
guess i will have to learn to live without it ... any way we can add like the last 20 lines of the system log optionally to the dashboard ....
i understand that not everybody would want that .... but the main reason why i kept unmenu going was because of the logs... when i had an issue with the unraid gui i always had unmenu nicely pointing out where the issue could be.....
Also lost some of my custom images for some dockers
or can i put them in a different folder ? tended to use the unmenu folder for those 555
Is the go file still being parsed as i still have a few others in there
#give nobody shell access usermod -s /bin/bash nobody #usermod -G mysql mysql #create sshd lastlog touch /var/log/lastlog #content cp /boot/custom/content/contentcatalog /etc/cron.weekly/ chmod +x /etc/cron.weekly/contentcatalog #crontab crontab -l > /tmp/file1; echo '#Start movie server' >> /tmp/file1; echo '01 08 * * * wakeonlan 48:5B:39:F5:DB:0B' >>/tmp/file1; crontab /tmp/file1; rm /tmp/file1 -
weird
Turned out to be a disk causing this ?
i removed the disk 10 which i added last and hey parity rebuild succeeded overnight ....
not sure what could be the problem... disk is OK according smart....
will try to change cable between disk and sil controller ....
any other bright ideas to further troubleshoot this?
power should be ok this enclosure ran 13 disks for years...
-
r2d2-diagnostics-20170625-1024.zipHi,
Got same lockup issue....
once a little bit load on the server it locks up...
can't run parity check ....as then it locks up... same with plex scan ....
not sure when it started i know 15th it ran a complete parity check without finding errors....
last boot now i disabled automount of my smb share of the other server
if people check the logs .... only way to get to the GUI after a "unclean shutdown" is to remove a disk so it won't start {so any errors about disk 10 not being there is because i removed it before boot}
attached diagnosis report... will run memtest now for a few hours...
-
squid ,
something wrong with the newest version...
got that there is a newer version but it doesn't have the same "format" as the other plugins and it fails to upgrade ... where other plugins upgrade fine
it says newest version 2017.04.29b
i am on 2017.04.09
the title in the plugins page is this
Quote
community.applications
Andrew Zawadzki 2017.04.09
2017.04.29b
error i get on both servers
plugin: updating: community.applications.plg Cleaning Up Old Versions plugin: downloading: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz ... failed (File I/O error) plugin: wget: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz download failure (File I/O error)like i said other plugins upgrade fine only this one fails on both servers
-
Thanks Tom,
will make things easier when another disk would go bad
-
Hi Tom,
above in the first post is all what it gives me ...
nothing more
let me see if i can find something in the logs but i doubt it as i did some unclean shutdowns and so on ....
i am kind of busy merging the 2 servers and so for the moment am running without parity ,....
that's why i was so pissed when reiserfsck which always worked in the past now suddenly refused to repair "minor" damages in the file system
anyway one of the disks is fully repaired and the other one i am over 80% checking now.. but i still have some bad blocks...
will see what i can do
-
Hi Tom, Limetech Team,
me and a few other people have a problem with the current version of reiserfsck that is in unraid 6.3.2
while running --rebuild-tree after --check tells us to do so... it throws a segmentation fault as underneath
i had it with 2 different disks in 2 different servers on different positions on each disk
but on the same position when i moved the disk to the other server
see thread from me in the general support forum
root@R2D2:~# reiserfsck --rebuild-tree /dev/sdg1
reiserfsck 3.6.25*************************************************************
** Do not run the program with --rebuild-tree unless **
** something is broken and MAKE A BACKUP before using it. **
** If you have bad sectors on a drive it is usually a bad **
** idea to continue using it. Then you probably should get **
** a working hard drive, copy the file system from the bad **
** drive to the good one -- dd_rescue is a good tool for **
** that -- and only then run this program. **
*************************************************************Will rebuild the filesystem (/dev/sdg1) tree
Will put log info to 'stdout'Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
Replaying journal: Done.
Reiserfs journal '/dev/sdg1' in blocks [18..8211]: 0 transactions replayed
###########
reiserfsck --rebuild-tree started at Thu Mar 9 20:41:59 2017
###########Pass 0:
####### Pass 0 #######
Loading on-disk bitmap .. ok, 241399810 blocks marked used
Skipping 15663 blocks (super block, journal, bitmaps) 241384147 blocks will be read
0%...Segmentation fault left 207493688, 22914 /sec
root@R2D2:~#when we downgrade unraid to 6.2.4 which has reiserfsck 3.6.24 then it doesn't throw the segmentation fault and can we repair our drives
####### Pass 3a (lost+found pass) #########
Looking for lost directories:
Looking for lost files:7 /sec
rewrite_file: 2 items of file [10750 10751] moved to [10750 66]
vpf-10680: The file [10750 66] has the wrong block count in the StatData (18592) - corrected to (0)
vpf-10680: The file [96666 8433] has the wrong block count in the StatData (86526040) - corrected to (86526024)
Flushing..finished
Objects without names 2
Files linked to /lost+found 2
Objects having used objectids: 1
files fixed 1
Pass 4 - finished done 494032, 55 /sec
Flushing..finished
Syncing..finished
###########
reiserfsck finished at Fri Mar 10 07:23:55 2017
###########would it be possible to check on this and solve the issue or downgrade reiserfsck in the next release?
-
HI Johnnie,
that seems to do the trick... one drive is nearly finished now... the other one has some bad blocks which i am mapping now and then will rerun rebuild-tree
does limetech know about this?
Greetings
-
3 minutes ago, johnnie.black said:
unRAID version?
HAHAHa it is in the title as asked for in the subforum description
6.3.2
quote -> Please prefix your post with the specific version of unRAID OS in use.
-
HI ,
got a reiserfs drive that became unformatted in my tv server
did a reiserfsck --check on the disk and it told me that it could be solved with --rebuild-tree
but at 15% this stops with a segmentation error.....
so did all the obvious things as memory checks and so on but it won't finish the rebuild
root@R2D2:~# reiserfsck --rebuild-tree /dev/sdg1
reiserfsck 3.6.25*************************************************************
** Do not run the program with --rebuild-tree unless **
** something is broken and MAKE A BACKUP before using it. **
** If you have bad sectors on a drive it is usually a bad **
** idea to continue using it. Then you probably should get **
** a working hard drive, copy the file system from the bad **
** drive to the good one -- dd_rescue is a good tool for **
** that -- and only then run this program. **
*************************************************************Will rebuild the filesystem (/dev/sdg1) tree
Will put log info to 'stdout'Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
Replaying journal: Done.
Reiserfs journal '/dev/sdg1' in blocks [18..8211]: 0 transactions replayed
###########
reiserfsck --rebuild-tree started at Thu Mar 9 20:41:59 2017
###########Pass 0:
####### Pass 0 #######
Loading on-disk bitmap .. ok, 241399810 blocks marked used
Skipping 15663 blocks (super block, journal, bitmaps) 241384147 blocks will be read
0%...Segmentation fault left 207493688, 22914 /sec
root@R2D2:~#so now i am stuck with a root block error
root@R2D2:~# reiserfsck --check /dev/sdg1
reiserfsck 3.6.25Will read-only check consistency of the filesystem on /dev/sdg1
Will put log info to 'stdout'Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
###########
reiserfsck --check started at Thu Mar 9 20:38:22 2017
###########
Replaying journal: Done.
Reiserfs journal '/dev/sdg1' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..Bad root block 0. (--rebuild-tree did not complete)
Aborted
root@R2D2:~#is there a way around this?
I tried moving the drive to my movieraid server but it hangs at the same point ....
so it is disk specific i guess...
would like to get to solve the root block error so that i can mount it readable and get the data from it ....
is there a way to do so ?
i know the data is still there as i did a test with easus data recovery and it finds everything ,,,,,
but there has to be a way around this bad root block thing.... it is reiserfsck that sets it when you do a --rebuild-tree
so surely it should be solvable?
got another disk on my movieraid server which refused to delete some files
so again ran check it tells me to run rebuild-tree anf again segmentation fault but this time at nearly the end of the check
so now i have 2 disks which are having the root block issue ....
this is crazy ... is there a known issue with the current reiserfsck program on our unraids?
-
installed tips and tweaks plugin
enabled powerdown
did a powerdown -r
and success
i send PM to dlandon with the logs location
this evening server should auto shut down
will send new logs tomorrow to dlandon again
Tom if you want the logs too let me know
sorry don't hang logs on boards any more due to script kiddies
-
Should get rid of Works only if webGui is running and listening on port 80 and allow any port instead
# Helper script to gracefully power-down unRAID server. port=$(lsof -i -P -sTCP:LISTEN|grep -Pom1 '^emhttp.*:\K\d+') # Access a blank page in case this is first request since startup. /usr/bin/wget -q -O - localhost:$port/update.htm >/dev/null # Have emhttp do all the work as if user clicked 'shutdown' in webGui. /usr/bin/wget -q --timeout 30 -O - localhost:$port/update.htm?shutdown=apply >/dev/null
Could this be the issue in my case ?
i am running the gui on port 90 due to plexconnect needing port 80
when do /usr/local/sbin/powerdown nothing happens LOL
whereas i use the plugin then it shuts down nicely
-
well installing the powerdown plugin solves the issue again
array shut down nicely last night
i don't mind troubleshooting but 2 times i tried powerdown without plugin and really "NOTHING" happens
no umounts not nothing
it is like typing clear in terminal but at least clear cleans up your terminal
powerdown did nothing lol
-
The /sbin/powerdown will still exist - it will just be the standard Limetech version rather than the one provided by the Powerdown plugin.
server didn't power down last night ;(
from cli
root@MovieRaid:~# /sbin/powerdown
-bash: /sbin/powerdown: No such file or directory
/usr/local/sbin/powerdown
or just
powerdown
powerdown or /usr/local/sbin/powerdown does NOTHING ....
going to install the package again after i find this restriction and delete the restriction
-
The /sbin/powerdown will still exist - it will just be the standard Limetech version rather than the one provided by the Powerdown plugin.
server didn't power down last night ;(
from cli
root@MovieRaid:~# /sbin/powerdown
-bash: /sbin/powerdown: No such file or directory
-
hi guys ,
how do i shutdown my server now if no powerdown is installed ?
running 6.2
before i had this in my go file
crontab -l > /tmp/file2; echo '#powerdown' >> /tmp/file2; echo '30 0 * * * /sbin/powerdown' >>/tmp/file2; crontab /tmp/file2; rm /tmp/file2what would i need to call now for a clean shutdown ?
-
back to 6.2
next problem
Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/disks.ini on line 233 in /usr/local/emhttp/plugins/dynamix/include/DeviceList.php on line 19 Warning: array_merge_recursive(): Argument #1 is not an array in /usr/local/emhttp/plugins/dynamix/include/CustomMerge.php on line 17 Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix/include/DeviceList.php on line 298
guess i wil do a new install
-
again a lot of issues with the GUI
Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/sec_afp.ini on line 302 in /usr/local/emhttp/plugins/dynamix/template.php on line 40
Can you post the content of the file /var/local/emhttp/sec_afp.ini
Send BY PM
went back to 6.1.9 but have no more access to my shares
considering to do a fresh install now
not sure what to think ....
-
again a lot of issues with the GUI
Warning: syntax error, unexpected $end, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/sec_afp.ini on line 302 in /usr/local/emhttp/plugins/dynamix/template.php on line 40
NONE of my disks have illegal characters NOR have my shares anything special
i get this while i was deleting unused dockers
seems it somehow loses the name of my UNRAID usb
Array DevicesDevice Identification Temp. Reads Writes Errors FS Size Used Free View
Total Array of seventeen devices * 0 0 0 0 B 0 B 0 B
Cache Devices
Device Identification Temp. Reads Writes Errors FS Size Used Free View
Boot Device
Device Identification Temp. Reads Writes Errors FS Size Used Free View
- 0 B ()
This is in the logs
Sep 16 14:43:34 P8H67 emhttp: nothing to sync Sep 16 14:43:34 P8H67 rc.swapfile[17419]: Checking for swap file plugin update during array mount ... Sep 16 14:43:34 P8H67 emhttp: Checking for swap file plugin update during array mount ... Sep 16 14:43:37 P8H67 rc.swapfile[24827]: Local plugin is the same version as on hosting server (v2015.09.21) Sep 16 14:43:37 P8H67 emhttp: Local plugin is the same version as on hosting server (v2015.09.21) Sep 16 14:43:37 P8H67 rc.swapfile[24829]: Starting swap file during array mount ... Sep 16 14:43:37 P8H67 emhttp: Starting swap file during array mount ... Sep 16 14:43:37 P8H67 rc.swapfile[24833]: Creating swap file /mnt/swap/swapfile please wait ... Sep 16 14:43:37 P8H67 emhttp: Creating swap file /mnt/swap/swapfile please wait ... Sep 16 14:43:38 P8H67 emhttp: Setting up swapspace version 1, size = 1.5 GiB (1643597824 bytes) Sep 16 14:43:38 P8H67 emhttp: LABEL=UNRAID-SWAP, UUID=c3269de5-952e-4f2e-8e24-efbff9d11c88 Sep 16 14:43:38 P8H67 emhttp: swapon /mnt/swap/swapfile Sep 16 14:43:38 P8H67 rc.swapfile[25719]: Swap file /mnt/swap/swapfile created and started Sep 16 14:43:38 P8H67 emhttp: Swap file /mnt/swap/swapfile created and started Sep 16 14:44:10 P8H67 emhttp: cmd: /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugin_rm /boot/config/plugins-error/powerdown-x86_64.plg Sep 16 14:45:01 P8H67 crond[1514]: exit status 2 from user root /usr/local/emhttp/plugins/dynamix.system.stats/scripts/sa1 1 1 &> /dev/null Sep 16 14:46:02 P8H67 crond[1514]: exit status 2 from user root /usr/local/emhttp/plugins/dynamix.system.stats/scripts/sa1 1 1 &> /dev/null
asrock x570 phantom gaming 4 - amd ryzen 5 2600 can't see sil 3114 cards ?
in Motherboards and CPUs
Posted
Hi,
as my old systemboard went haywire and don't let me boot any more from usb when all 16 drives are attached did i jump to this new setup which is even more frustrating
no matter what i try he doesn't want to accept or my adaptec 1220SA or my sil 3114 sata cards....
he only sees my one asm162 card ...
i can move that last card to any slot and he will see the disks attached .... the adaptec or the sil cards he doesn't see the disks in any of the slots
anybody has some advice?
thinking of buying a lsi 9211-8i in IT mode but afraid he won't see him too....
might be best to just return the setup?
any advice on a ryzen board that sees the sil or the adaptec card?
Greetings
Sacret