bdydrp

Thanks Thought i would ask anyway Cheers

Is it possible within this docker container to run early access versions like 7.5.169? I have an open ticket about the topolgy of my network because it shows my switch is uplinked from an AP, which it is clearly not. They have suggested to run the early access version, so just asking if its possible, if not, all good Cheers

After reading about some call trace issues, ive folowed other guides to seperate docker containers on their own interface And since i have a quad port installed, i thought i could set up 1 interface of for my IOT and 1 for CCTV This is my network settings page And my docker settings: Ive removed my VM and reinstalled, but now i cant select eth1 as my network source in vm config The only option to select is virbr0 any pointers Cheers tower-diagnostics-20230729-1650.zip

Are you using influxdb2 with flux query?

Downgraded unraid and all works normally again.. Something in the latest os breaks grafana.... need to try and sort out what!!

Anyone else have an issue with grafana starting, after upgrading OS to 6.11.1? Edit: got it starting again by removing --user 99:100 from extra parameters! Now tho, grafana wont connect to influxdb. All settings within grafana/ influx are the same as they were before upgrading unraid

Where do i find extended logs of Node Red?? My NR container stopped, and the logs from the webui dont go back far enough.. Any one have any suggestions on how i can get a notiifcation when NR stops?? Thanks

Hi All, I was wondering if there is a way i can get a notifiation when one of my docker container stops? I already use telegram notifications for unraid system notifcations - so adding to this would be great. Thanks

Yes.. Thats another possibility ! Cheers

Not sure if i should post this in this mqtt thread or Nginx Proxy Manager thread, but since i have NPM woking for other proxys, i thought i would start here What i would like to do is be able to reach my mqtt broker form outside my local network. I have a duckdns name set..eg. mymqtt.duckdnsorg In NPM have a a host a ssuch But on my phone or nodered i cant access my mqtt broker Is this possible to achieve? I know i can leave my vpn running 24/7 on the phone, and just access it that way. but i'm looking for a different solution so i dont have to do that on my wifes phone Cheers

Thanks Well, im well and truly stumped aswell!!! Just for my sanity. /CCTV is a 2 disk cache pool when passing this through to the VM, the only way is to specify /mnt/cctv in the 2nd vdisk slot in the template, which will automatically create vdisk2.img?

ok - going to have to revive my thread as now the drive almost full acording to unraid - still have ~945gb free in windows I have tried the scsi option again but cant install driver from within device manager I have added the 'unmap' option within the xml <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback' discard='unmap'/> <source file='/mnt/cctv/Windows 10/vdisk2.img' index='3'/> NOt sure where else/what else to do here now? Would changing from Raw to qcow2 be of any use? if so, how do i go about this Cheers all

No worries! - Thanks for trying. Because the disk in not "thin provisioned", is this why unraid shows different disk usage to the VM?

OK - Removed VM and started form scratch. Here is my XML ```<?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='10'> <name>Windows 10</name> <uuid>3478ddfa-c348-a835-863f-073d6505593b</uuid> <description>BlueIris CCTV</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>2621440</memory> <currentMemory unit='KiB'>2621440</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='10'/> <vcpupin vcpu='2' cpuset='5'/> <vcpupin vcpu='3' cpuset='11'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-5.1'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='2' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/cache/domains/Windows 10/vdisk1.img' index='4'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback' discard='unmap'/> <source file='/mnt/cctv/Windows 10/vdisk2.img' index='3'/> <backingStore/> <target dev='hdd' bus='scsi'/> <alias name='scsi0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/cache/isos/Windows 10 Pro x64 en-US Activated.iso' index='2'/> <backingStore/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/cache/isos/virtio-win-0.1.208.iso' index='1'/> <backingStore/> <target dev='hdb' bus='ide'/> <readonly/> <alias name='ide0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='ide' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='sata' index='0'> <alias name='sata0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </controller> <controller type='scsi' index='0' model='lsilogic'> <alias name='scsi0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:dc:4d:93'/> <source bridge='br0.10'/> <target dev='vnet0'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-10-Windows 10/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='connected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5900' autoport='yes' websocket='5700' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain> Windows still cant find driver! So now, not really sure what im doing wrong!!

hmmmmm - i still get sam error Perhaps, ill remove the vm and start form scratch

If i change disk to SCSI - It wont find the driver Leaving as sata, Right Clicking on the driver and installing indicates driver installed, but does not change to thin provisioned. I have added the "discard=unmap option" to the xml

I have run a disk defrag, WIndows doesnt show the vdisk as "Thin provisioned" - Should it? Also, unraid is still showing that im at 280GB free, when windows disk is showing at 740GB free And ive noticed that windows vm is running much slower now, with unraid cpu running bit higher

Sorry, should read better!! I have added the option and now running a disk defrag and optimize I note, it doesnt have the disk listed as "Thin provisioned drive", but will wait until defrag is finished Thanks again

I have changed bus to scsi, but when trying to install the drivers within windows, it fails. Cant find drivers

Thanks - I will give that a try Thanks

I've set up a cache pool and combined them to make as 1 large drive (2x3TB) I/m trying to understand why unriaid is telling me me cache is almost full ~320GB free, yet Win10 VM shows as ~657GB Free. When allocating disk in Win 10 disk management, i set the size just under 6TB. But i have also noticed, that unraid VM allocation is only showing 5TB, i know when i created the vdisk, i set its szize to 6TB. Any care to explain, so i can understand whats happening Cheers tower-diagnostics-20211104-2235.zip

Thanks. Now you mention windows update, I do recall that happening when the vm booted back up!! Oddly, after my last post, I realised that sbm1 was turned OFF within unraid, so I disabled that feature within windows anyway. \\tower, still didn't work, but accessing via IP did ( i already set up windows credentials to match that of unraid user, except I used the IP as the network name instead of Tower) But since I can access via IP, I'm not too fussed that \\tower doesn't work Thanks - I will have a read through the linked doc Cheers

I too cannot get \\tower to work, nor does tower appear in 'network' under windows 10 It was working, but since a reboot of the win10 vm, it stopped. The tower is visible in explorer ONLY via the IP\share I have followed the TL:DR sticky, except i dont have that setting in regedit! I have also enabled SMB1/CIFs in windows features. Anyone know what would cause it to work one day the stop after a reboot?

So the unidentified macs in Unifi relate to the Shim-Br0, .10, .20 networks Reason only 2 is listed above is because Unifi has listed my IP address against shim-br0 network. Now at least i can name them in Unifi so I know what they are Thanks for all the help

Thanks I will give these ago and do some homework