JimPhreak

Awesome. Thanks for the quick response aptacla.

Having an issue with my Sonarr docker today. I went into the webGui today to see if all my shows downloaded last night to find that one of them was mysteriously missing from my calendar. So I look at my series editor and in fact it was gone. I tired to add it but doing a search just times out and it finds nothing. I then went to do an update to see if maybe there was some bug and the updates page just will not load at all. I tried restarting the docker multiple times but no resolution. So I figured why not delete and recreate the docker container in case something go corrupt. Now I can't even get Sonarr to load, the log just sits at this point: ----------------------------------- GID/UID ----------------------------------- User uid: 99 User gid: 100 ----------------------------------- Get:1 http://apt.sonarr.tv master InRelease [6,875 B] Ign http://mirrors.rit.edu/ubuntu/ trusty InRelease Get:2 http://mirrors.rit.edu/ubuntu/ trusty-security InRelease [64.4 kB] Get:3 http://mirrors.rit.edu/ubuntu/ trusty-updates InRelease [64.4 kB] Get:4 http://mirrors.rit.edu/ubuntu/ trusty Release.gpg [933 B] Get:5 http://apt.sonarr.tv master/main amd64 Packages [108 kB] Get:6 http://mirrors.rit.edu/ubuntu/ trusty-security/main Sources [123 kB] Get:7 http://mirrors.rit.edu/ubuntu/ trusty-security/restricted Sources [3,230 B] Get:8 http://mirrors.rit.edu/ubuntu/ trusty-security/universe Sources [35.4 kB] Get:9 http://mirrors.rit.edu/ubuntu/ trusty-security/multiverse Sources [2,168 B] Get:10 http://mirrors.rit.edu/ubuntu/ trusty-security/main amd64 Packages [448 kB] Get:11 http://mirrors.rit.edu/ubuntu/ trusty-security/restricted amd64 Packages [19.4 kB] Get:12 http://mirrors.rit.edu/ubuntu/ trusty-security/universe amd64 Packages [152 kB] Get:13 http://mirrors.rit.edu/ubuntu/ trusty-security/multiverse amd64 Packages [3,526 B] Get:14 http://mirrors.rit.edu/ubuntu/ trusty Release [58.5 kB] Get:15 http://mirrors.rit.edu/ubuntu/ trusty-updates/main Sources [304 kB] Get:16 http://mirrors.rit.edu/ubuntu/ trusty-updates/restricted Sources [4,513 B] Get:17 http://mirrors.rit.edu/ubuntu/ trusty-updates/universe Sources [180 kB] Get:18 http://mirrors.rit.edu/ubuntu/ trusty-updates/multiverse Sources [5,109 B] Get:19 http://mirrors.rit.edu/ubuntu/ trusty-updates/main amd64 Packages [803 kB] Get:20 http://mirrors.rit.edu/ubuntu/ trusty-updates/restricted amd64 Packages [22.7 kB] Get:21 http://mirrors.rit.edu/ubuntu/ trusty-updates/universe amd64 Packages [424 kB] Get:22 http://mirrors.rit.edu/ubuntu/ trusty-updates/multiverse amd64 Packages [12.9 kB] Get:23 http://mirrors.rit.edu/ubuntu/ trusty/main Sources [1,335 kB] Get:24 http://mirrors.rit.edu/ubuntu/ trusty/restricted Sources [5,335 B] Get:25 http://mirrors.rit.edu/ubuntu/ trusty/universe Sources [7,926 kB] Get:26 http://mirrors.rit.edu/ubuntu/ trusty/multiverse Sources [211 kB] Get:27 http://mirrors.rit.edu/ubuntu/ trusty/main amd64 Packages [1,743 kB] Get:28 http://mirrors.rit.edu/ubuntu/ trusty/restricted amd64 Packages [16.0 kB] Get:29 http://mirrors.rit.edu/ubuntu/ trusty/universe amd64 Packages [7,589 kB] Get:30 http://mirrors.rit.edu/ubuntu/ trusty/multiverse amd64 Packages [169 kB] Fetched 21.8 MB in 7s (3,007 kB/s) Reading package lists... I also see that the last update log was on Oct. 14th so it seems that no updates have installed since then. EDIT: Docker finally loaded but webgui is still unresponsive when doing a search for any new show or when clicking on the updates page. When the updates page finally loads after a few minutes I get these entries in the log after I hit install latest. [Fatal] NzbDroneErrorPipeline: Request Failed System.Net.WebException: The request timed out at System.Net.HttpWebRequest.EndGetResponse (IAsyncResult asyncResult) [0x00000] in :0 at System.Net.HttpWebRequest.GetResponse () [0x00000] in :0 at NzbDrone.Common.Http.HttpClient.ExecuteWebRequest (NzbDrone.Common.Http.HttpRequest request, System.Net.HttpWebRequest webRequest) [0x00000] in :0 [Warn] SkyHookProxy: The request timed out System.Net.WebException: The request timed out at System.Net.HttpWebRequest.EndGetResponse (IAsyncResult asyncResult) [0x00000] in :0 at System.Net.HttpWebRequest.GetResponse () [0x00000] in :0 at NzbDrone.Common.Http.HttpClient.ExecuteWebRequest (NzbDrone.Common.Http.HttpRequest request, System.Net.HttpWebRequest webRequest) [0x00000] in :0 [info] InstallUpdateService: Downloading update 2.0.0.3551 [info] InstallUpdateService: Verifying update package [Error] InstallUpdateService: Update package is invalid [Error] InstallUpdateService: Update process failed NzbDrone.Core.Update.UpdateVerificationFailedException: Update file '/tmp/nzbdrone_update/NzbDrone.develop.2.0.0.3551.mono.tar.gz' is invalid at NzbDrone.Core.Update.InstallUpdateService.InstallUpdate (NzbDrone.Core.Update.UpdatePackage updatePackage) [0x00000] in :0 at NzbDrone.Core.Update.InstallUpdateService.Execute (NzbDrone.Core.Update.Commands.ApplicationUpdateCommand message) [0x00000] in :0 [Error] CommandExecutor: Error occurred while executing task ApplicationUpdate NzbDrone.Core.Messaging.Commands.CommandFailedException: Downloaded update package is corrupt ---> NzbDrone.Core.Update.UpdateVerificationFailedException: Update file '/tmp/nzbdrone_update/NzbDrone.develop.2.0.0.3551.mono.tar.gz' is invalid at NzbDrone.Core.Update.InstallUpdateService.InstallUpdate (NzbDrone.Core.Update.UpdatePackage updatePackage) [0x00000] in :0 at NzbDrone.Core.Update.InstallUpdateService.Execute (NzbDrone.Core.Update.Commands.ApplicationUpdateCommand message) [0x00000] in :0 --- End of inner exception stack trace --- at NzbDrone.Core.Update.InstallUpdateService.Execute (NzbDrone.Core.Update.Commands.ApplicationUpdateCommand message) [0x00000] in :0 at NzbDrone.Core.Messaging.Commands.CommandExecutor.ExecuteCommand[ApplicationUpdateCommand] (NzbDrone.Core.Update.Commands.ApplicationUpdateCommand command, NzbDrone.Core.Messaging.Commands.CommandModel commandModel) [0x00000] in :0 EDIT #2: I tried completely deleting the docker container as well as deleting (well moving it out of my appdata folder for to test) the Sonarr config folder. When I try to re-create the Sonarr docker I get the following message while it's creating: Warning: mkdir(): File exists in /usr/local/emhttp/plugins/dynamix.docker.manager/include/CreateDocker.php on line 23

No need for me to update [emoji6] If you want to try out that version (remember it is not yet stable) go into your container settings, open the advanced view, change the branch variable to dev. When you hit save, it will update and restart I did this an in the process of the the docker restarting I got this message in the log: Where do I run this command from in order to update meteor?

Is there any configuration needed after installing this plugin? I have the IPMI Tool listed under tools but there are no sensors/fans listed under sensors and nothing is in the event log.

Is there any way to cancel preclears that have been started from the plugin?

Got it. Thanks!

Did you install the faster script? No. I wasn't sure if I needed both or just need to replace the original with the faster one and rename it?

I noticed in the plugin description it says "This plugin is a parser for Joe L. excelent Preclear Disk Script. It also include a fast post-read verify option, courtesy of bjp999." I don't see it as a selectable option so I assume all preclears dont with this plugin will include the faster post-read verify option?

Same for me as well. I have a Sandisk Ultra Fit and a Sandisk Cruzer fit both allocated to unRAID. What people may be unaware of is ESX also reports 'Reset high speed USB' messages in /var/log/vmkernel.log until the messages stop in unRAID. Correct, by the way I have those exact 2 USB's (One cruzer fit, one ultra fit) in my server as well .

I can confirm also that just simply formatting a spare usb flash drive I had laying around and adding that USB device to my unRAID VM stopped the error messages for me. I will also note that I have the unassigned devices plugin installed and the 2nd flash drives shows up under there (though I don't have it mounted).

I'm looking to buy a power supply for my new rack mounted server case and I'm interested in the idea of redundant power supplies. However every review I read on them, people complain about how loud the fans are on them which turns me off because my server is not in a dedicated server room. You can get ATX form factor redundant power supplies. They're not cheap. Redundant power supplies are noisy because they typically can not fit even 80mm fans in them. Smaller fans are noisy. To me, they are not worth it, if you do not have redundant power to separately feed them, and a UPS. You're better off with a quality spare PSU on the shelf. Yea that's what I've decided to do. My Seagate 8TB drives pull a max of 7.5w each and I've got 10 slots for them. My CPU being only 45w means I can probably get away with a pretty low wattage PSU.

I'm looking to buy a power supply for my new rack mounted server case and I'm interested in the idea of redundant power supplies. However every review I read on them, people complain about how loud the fans are on them which turns me off because my server is not in a dedicated server room.

I just tried removing and re-adding the plugin and now the icon looks different and it doesn't show up under Settings. Do I need to reboot after installing this plugin? If so I'll have to do that late. And yes I've confirmed the directory location is correct and I've reloading my browser. EDIT: Hmmmm, wonder if this is an issue with VMware. The script seem to install properly and work fine on my backup server which is baremetal.

-rwxrwxrwx 1 root root 85224 Apr 5 2014 preclear_disk.sh*

I've got the plugin installed and the script is located in \\tower\flash\config\plugins\preclear.disk but the plugin still tells me the script is missing. What am I doing wrong?

Done. I didn't see that there was a 6.1.3 release until today. Zeron, you are the man!

Any chance this will be updated for 6.1.3 since there was a kernel change to 4.1.7?

Is there any documentation on how this is done with regard to UPS's attached to unRAID guest VMs? i'm connected my APC unit to Windows VM, but this is similar to unRAID i think. first, i'm telneting to unRAID and power it down with sbin/powerdown then wait some time (1minute for me) and ssh to esxi host and excute "/sbin/shutdown.sh && /sbin/poweroff" look at unRAID /etc/apcupsd/doshutdown you can ssh from here to esxi host and execute command above.. if you have VMWare tools installed on unRAID, esxi will do clean shutdown i think.. (not tried yet..) I do have VMWare tools installed. I'll have to look into doing this when I get my new UPS next week.

Is there any documentation on how this is done with regard to UPS's attached to unRAID guest VMs?

ok, i just tested it on my test server (X9SCM-iif board) with 6.1 final and no change for me - issue are still there.. for me, a quickest workaround is to add second USB device - flash or UPS and then no issues.. Interesting. So if you don't passthrough your USB controller and just add a second USB device in addition to the boot flash to your VM the issue is resolved? How exactly would one use a UPS (or even want to) with a VM guest? Wouldn't you want the UPS to shut down the entire host?

Has anyone who is still have issues with resets had a chance to test with the new version 6.1? I would but I have to shut my entire VM server down to remove the passthrough configuration and then have to shut it down again to configure it again if it doesn't fix the issue. I'm doubting the issue is resolves since none of the 6.1RC's seem to fix it but it's worth a shot.

I just installed the Linuxserver Plex docker and I'm seeing some log messages every few seconds that I'm unsure about. Just to note, I previously had needo's docker so when I installed the Linuxserver docker, the config folder contents were all from my old docker. Both those IPs are Windows 10 machines (PC and Surface).

With regard to PlexRequests, where are the config files stored? I was having an issue with the CouchPotato setting (was reading my API as NaN) and deleted the setting by accident.

I fooled with it for a few days but wound up going back to ESXi. I just like the management interface of the vSphere client much more than the Proxmox management options that are out there. I'd play around with Proxmox more in a test environment but for my home server I needed to get things up more quickly for functionality and I've been using VMware for years so I just didn't have the time to learn a new hypervisor like I wanted.

Not sure what you need apart from the previous screenshot. Tell me a bit more in detail how to find what you need, and I'll be happy to help! Nah I got it based on your last post. Looks like you're not actually passing through any devices just adding them to the VM. I was thinking u were doing Direct I/O passthrough of individual USB ports somehow.