aguyingreene

It looks like the plugin never loads. Im not sure why...

Speeds used to be 40-50 mbps. Now 4.5 mbps. I'm not sure what is going on. Please see atached file. I tried to run the fix common problems pluging but all I get is a blank screen after installing the plugin. Any help would be appreciated. tower2-diagnostics-20161009-0850.zip

Good morning. I am getting very slow write speeds after upgrading to 6.2. I have tried to install this plugin but after installation I click on the plugin, it sends me to the settings page. Unfortunatly the page is blank. Clicking on settings again show me the normal setting page. No icon for the new plugin. Any help would be appreciated.

Looking for some assistance. I updated my server yesterday and am noticing very slow write speeds compared to 5.05. I tried to upgrade a year ago and had the same issue. Any suggestions? I would hate to have to go back again...I have included hardware info: 5.05 - 40-60 mbps 6.2 2-3 mbps - Crazy slow 0:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) 00:1c.5 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 [8086:1e1c] (rev c4) 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 10) 03:00.0 USB controller [0c03]: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller [1106:3432] (rev 03) 04:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) 06:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10) 07:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] (rev 11) No IOMMU Groups cpu 0 <===> cpu 2 cpu 1 <===> cpu 3 Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 004: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 005 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 005 Device 002: ID 2109:0811 VIA Labs, Inc. Hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [0:0:0:0] disk SanDisk Cruzer Fit 2.01 /dev/sda 4.00GB [1:0:0:0] disk ATA WDC WD30EFRX-68E 0A82 /dev/sdb 3.00TB [2:0:0:0] disk ATA ST3000VN000-1H41 SC43 /dev/sdc 3.00TB [3:0:0:0] disk ATA WDC WD30EFRX-68E 0A80 /dev/sdd 3.00TB [4:0:0:0] disk ATA WDC WD30EFRX-68E 0A80 /dev/sde 3.00TB [5:0:0:0] disk ATA WDC WD30EFRX-68A 0A80 /dev/sdf 3.00TB [7:0:0:0] disk ATA WDC WD30EFRX-68A 0A80 /dev/sdg 3.00TB [8:0:0:0] disk ATA TOSHIBA DT01ABA3 ABB0 /dev/sdh 3.00TB [9:0:0:0] disk ATA TOSHIBA DT01ACA3 ABB0 /dev/sdi 3.00TB [10:0:0:0] disk ATA HGST HTS721010A9 A3B0 /dev/sdj 1.00TB [10:1:0:0] disk ATA WDC WD30EFRX-68A 0A80 /dev/sdk 3.00TB [10:2:0:0] disk ATA ST3000VN000-1H41 SC43 /dev/sdl 3.00TB [10:3:0:0] disk ATA ST32000542AS CC95 /dev/sdm 2.00TB [10:4:0:0] disk ATA WDC WD30EFRX-68E 0A82 /dev/sdn 3.00TB

With all these speed problems I was thinking about downgrading back to 5. I replaced a failing disk last weekend after upgrading. If I roll back to the previous version will the system recognize the new disk properly?

What are the normal speeds for parity checks and disk rebuilds under V6?

Parity check is still running. I will post a a system log when it is comple tonight. I noticed the system maxes out at 25-30 mbps. I believe I used to get 80-90 mbps...

Here is the system log with parity check running. Much slower compared to version 5. Any suggestions? 1 day 19 hours to go. This process used to take 12 to 14 hours... System: Gigabyte Technology Co., Ltd. - Z77X-D3H Flash GUID: 0781-5571-0011-531207123383 CPU: Intel® Core™ i3-3225 CPU @ 3.30GHz Cache: 64 kB, 512 kB, 3072 kB Memory: 8192 MB (max. installable capacity 32 GB) Network: eth0: 1000Mb/s - Full Duplex Kernel: Linux 3.19.4-unRAID x86_64 OpenSSL: 1.0.1k syslog.zip

I decided to upgrade my server from 5.0.4 to 6.0 Beta 15. Everything went well except parity checks and disk rebuilds are very slow. I use to see speeds in the 80+ ranges, now the are maxing at 20. Parity checks would take about 14 hours. Now they are taking a day and a half. Disc rebuilds also take about the same time. What gives? Please see attached system log. syslog.zip

I upgraded my system from 5 to the most current beta. All went well. I noticed one of my drives was getting a thumbs down so I decided to replace it. I had to do this a couple of months ago and the disk rebuild took about 14 hours. This time it took a day and a half. Ran a parity check this morning... The system tells me it will be done in a day and a half as well. Why the major slow down? Please see attached log... syslog.zip