grooves12

Is it possible to get scraper addons functioning with this version? I've tried creating an "addons" folder and placing them there, but they are not being picked up.

Ihave this setup, I am using google domains with CNAME's setup there. I can access using my custom hostnames remotely, but when I am connected to the local network things intermittently do not work. Overseer gives a "you are offline" error, radarr and sonarr gives a "site cannot be reached" Acessing locally via IP adress works perfectly, so does connecting via phone with hostnames. However as soon as I connect to local network I can no longer access from that device using the host name. Any ideas where I should start?

Is there a way to have a worker automatically pause/unpause based on remaining disk space on the transcode storage location? If not, can that feature be requested?

On a 60" TV, they will look about the same, as you have observed. But, 4K is really meant for going above and beyond 65" into the 70, 75, 85, and 100+inch category. That may seem ridiculous to you now and "too big" but just a few years ago, the same arguments were made about 60 and 65" TVs and 1080p... people were saying, "I can't tell the difference between 720p and 1080p on my 43" TV."

I actually solved this. Found the update guide in another thread and was able to resolve by changing my VM paths.

The VM tab is displaying nothing when clicked on. When I go to the VM manager it is set to enabled, but it displays "Status: Stopped"

Thanks for the help... but the change to the wiki is still incorrect... It requires a couple more steps to complete properly. 1) You need to change all cache shares to Yes, then run mover to get a copy on the array 2) You change them to No, then run mover to delete from cache drive

I am trying to upgrade my cache drive following these steps: https://wiki.lime-technology.com/Replace_A_Cache_Drive I have changed all shares to "no" under use cache drive, but when I manually invoke the mover nothing happens. The files still reside on the cache drive. Checking the log it shows the mover start and then immediately stop: "Oct 4 11:11:21 tower root: mover started Oct 4 11:11:21 tower root: mover finished"

I am trying to figure out why my internet connection speeds are slower than they should be on Unraid. I have a Comcast 150mbps connection, and all other devices on network test out to 120+ mbps consistently. My Unraid box will only download/speedtest at 50ish mbps. It is connected via a powerline AV2 connection to my router, but I have ruled that out as a cause of the issue as my laptop connected to the same connection maxes out my internet as well. I used to have no problems maxing out my connection, but it popped up a few weeks ago and I haven't been able to figure it out. Any ideas?

I've used NZBtoMedia for post-processing for Sickbeard/Couchpotato w/ SabnZbd for a long time: https://github.com/clinton-hall/nzbToMedia These scripts have support for 7zip and ffmpeg for advanced video file checking. Is there any way to add those in as dependencies to Sabnzbd so those features will work? Or maybe even an additional plugin for NZBtoMedia?

You shouldn't have to copy anything. When you add a drive to the pool raid1 balancing takes care of everything. I've had same cache drive since unraid 5... formatted as resierfs, so I will need to reformat it plus add the new drive.

I'm planning on upgrading to a cache pool with unraid 6 from a single cache drive. Do I just have to copy my "config" folder from the old drive to the new cache pool to keep all my settings?

Looking for help with the same. Anyone?

I just installed a new SATA card in my server to expand capacity. The wires were difficult to trace so I just picked a random two drives to remove from MB and connect to SATA card. Is there any way in unraid to see which drives are connected to which controller? I am running headless and don't want to have to move everything around to connect to a monitor to check BIOS.

Thanks for the suggestion. Another question, does Unraid gracefully handle disks switching from one controller to another? I am currently maxed out on my motherboards SATA ports. I wanna add another cache drive, so my plan is to move one or more of my media disks over to the new card and add the ssd to the faster MB controller. Would that work without too many issues?

I am looking to upgrade my unraid server, and am looking for a budget SATA 4-port card. I do not need hardware RAID functionality, just good performance for media storage without any fuss. For media only storage would an x2 card suffice? what would sway me towards an x4? Any suggestions?

What is the proper way to upgrade to Unraid v6 from a v5 installation that is currently using these plugins?

I have used the update plugin button in the sickbeard plugin and when I reboot it reverts to an old version of the plugin and have to use the update plugin button again. Any idea why?

Are you planning on supporting HTPC Manager?

using this on unraid 5 inst as easy as I thought lol. I used all the packages from my normal sickbeard install to overwrite those slckware 14 packages. Sickrage runs fine,but it doesnt seem to be able to connect to the internet. It cant search for shows and it doesn't detect it own version number, cant restart from the application....guess I'll just continue with the normal branch for now. I did what Phaze said, I used his 32bit plugin and opened it in a text editor and did a find and replace foor the Sickbeard repo URL replacing it with the SickRage Repo URL. (Only 3 instances) I'm still holding out hope for a cleaner and officially supported plugin at some point, but it is working perfectly for me at this point. sickrage.plg.txt

I just switched from the unplugged versions over to these. I was able to get Sabnzbd, Sickbeard, and Plex up and running without problems, but Couchpotato will not work for me. When I click start in the unraid webgui... it looks like it is starting the plugin then it refreshes the page and still says "stopped" (This is with unraid5 and 32 bit plugins.)