shremi

So i decided to upgrade my cache drive , everything went ok or so i thought. I have a strange issue when i update a docker container it resets the network connection. i am attaching some pictures. I apply the update Pulling image: linuxserver/radarr:latest IMAGE ID [1211727932]: Pulling from linuxserver/radarr. IMAGE ID [3b8cf8713836]: Already exists. IMAGE ID [07a0e16f7be1]: Already exists. IMAGE ID [667a39f8e19d]: Already exists. IMAGE ID [ecfc18e38ba1]: Already exists. IMAGE ID [486a0ab8af67]: Already exists. IMAGE ID [d13bf8c7752d]: Pulling fs layer.Downloading 100% of 69 MB.Download complete.Extracting.Pull complete. IMAGE ID [e0ce5493cc2f]: Pulling fs layer.Downloading 100% of 964 B.Verifying Checksum.Download complete.Extracting.Pull complete. Status: Downloaded newer image for linuxserver/radarr:latest TOTAL DATA PULLED: 69 MB Stopping container: radarr Successfully stopped container: radarr Removing container: radarr Successfully removed container: radarr Command execution docker run -d --name='radarr' --net='none' -e TZ="America/Mexico_City" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Tower" -e HOST_CONTAINERNAME="radarr" -e 'PUID'='99' -e 'PGID'='100' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:7878]' -l net.unraid.docker.icon='https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/radarr.png' -v '/mnt/user/Downloads/Complete/':'/downloads':'rw' -v '/mnt/user/Media/Movies':'/movies':'rw' -v '/mnt/user':'/mnt/user':'rw' -v '/mnt/user/appdata/radarr':'/config':'rw' 'linuxserver/radarr' 7a3132194df32fb3bdf7e7fe700df14644475a6ec2cc04d5067cd7a38f7ea445 The command finished successfully! Removing orphan image: 9e6f315ce211 Error: Image can not be deleted, in use by other container(s) And now the docker loses the dockernet network. Any ideas on how to solve this

Yeah i am trying to add my usb-rtl dongle to my home assistant VM , from what i read , it is required to connect as serial for home assistant.

Hello i am trying to add my rtl 433 USB device to my home assistant VM . I am getting some virsh errors. root@Tower:~# cat /usr/local/emhttp/state/usb.ini | grep error virsherror = "" virsherror = 1 virsh = "error: Failed to attach device from /tmp/libvirthotplugusbbybusHassio-003-004.xml error: unable to stat: /dev/serial/by-id/: No such file or directory And the weirdest thing root@Tower:~# cd /dev/serial/by-id/. bash: cd: /dev/serial/by-id/.: No such file or directory I am at a lost in here , any advice on how to proceed ????

Thanks for this guide and docker @aeleos, was able to set it up and close my port frowarding rules. How are you guys handeling reating new certs ? DNS challenge ?? I use NPM and since i closed the ports 80 and 443 i get error when creating new certs. I also assume that this applies when renewing certificates also

I upgraded and lost all of my docker containers and vms.... Rolling back dint help much . How to proceed

I think i messed up when configuring the address on the extension. All fixed now i believe it wasa typo Thanks for the help bro

Yeah i am able to acces via the web ui .... i can even log in and set up a few passwords. I did use Nginx proxy manager for the reverse proxy tho.

Guys i have a quick bitwarden question : I have set up the docker container and the reverse proxy to it. I also created an account and i can log in. However when trying to use the chrome extension what changes do i need to make ?? I have pointed to my self hosted address but i have this errors. Failed to construct 'Request': Failed to parse URL from https://:bitwarden.xxxxxx.com/api/accounts/prelogin

Hey guys I am struggling a bit with my VM .... I finally got a spare gt 710 so I can install Catalina .... Everything went smoothly . Installed splashtop however when I switched to the gpu splashtop doesn't want to connect..... I then moved to TeamViewer I can connect when I try type in the password it doesn't register anything. I am simply at a lost here . Anyone has had this issue before ?

Hey guys so i have been trying to get to my Windows VM to boot which was previously working fine. I have edited my bios according to the spaceinvader guide and it was working previously nothing has changed i can boot to the VM using VNC but whenever i pass through the GPU windows cycles 3 times and then i get the windows couldn't start screen. I can attest to the card working fine as my OSX VM boots it perfectly. So a hardware issue is not here On a side note . I have just installed POP OS to play a little bit but i also can't get the card to work with it any recommendations for this ?? The logs really doesn't throw any error at all.

Hello after reading the thread i am trying to add my nvme drive to a windows vm but its taking forever to load. <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </source> <alias name='ua-sm2262'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> <qemu:commandline> <qemu:arg value='-set'/> <qemu:arg value='device.ua-sm2262.x-msix-relocation=bar2'/> </qemu:commandline> </domain> after i read the fix i have tried to implement it to my XML however i cant seem to get the part of the : <alias name='ua-sm2262'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> Where should we get the information ?? I tried with the bus='0x02' but i have an error i canot save the XML... if i leave everything to 0 it pupulates as the XML i posted above.... I managed to not give me an error so i know i must be going in the right direction. Any of you guys have more info on this?

It was my b i am using https SSL to access unraid dont know why it didn't worked yesterday but i was able to do it today using https and port 443. So know i am going all out with this docker just finished setting up organizr to the way i like but it seems i cant do te reverse proxy to access it . again i am using a cname redirected to the organizr container but it doesnt seem to work . is there anything special we need to configure to make organizr to work with this? Scratch that i had a fckn misspell on the cname lol i am able to get too through now my tabs dont open i think i need too do more digging on why is this happening.

I just finished moving from the letsencrypt docker to this docker great and amazing work. I by no means am a network guy but after a couple of tries (with my pfsense and opening the ports) i was able to get up and running in no time .... as other stated make sure the docker containers you are trying to access are in bridge mode, i was using the custom proxynet interface since i followed the spaceinvader one videos. The main reason i moved to this is to get access to a VM that is running hassio for home automation, i also always got some errors on the unifi controller with the certificate on the letsencrypt docker and with this docker i didn't get any type of errors . I am using my own domain with cnames for the different docker containers. Great job on this docker OP very recomended for the ease of usage vs the letsencrypt docker. However i am struggling with the last part of my setup i want to be able to redirect the Unraid UI to a cname i just don't know how to do it since it uses ports 80 or 443. Anyone was able to pull this through ?

You are a rockstar!!!!! It works...... Thank you so much for this.....

Ohhhh that might be the issue i followed eds video but he never mentioned to save the files on the site folder we used the proxy confgs folder..... how should i name the file????

Ya both of them several times XD

Yeah i figured i get no errors in the logs but i get the Welcome to our server message i tried both ways. https://unifi.myserver.us:8843/ https://unifi.myserver.us Do you know if there is a way to run both controllers at the same time ???? i cant get to recognize my backup file since the mismatch versions ... and then i am lost dont know what to do

Thank you for the reply ..... i installed the wrong unifi container and now i think i am stuck with it ..... sucks but thanks for trying to help i tried that already changing with those parameters and no dice ...... just to verify i need to rename the server_name also right??? the proxy_pass to match my subnet?

Can someone explain to me how to get unifi controller to work with this??? I just watched eds video and i am able to get almost all of my containers but i am stuck with this one... i am using brettm357/unifi docker. thanks

I just finished moving my windows VM to a new nvme drive it works great however when i alocated another space since the next thing i want is to install a OSX VM in the drive. However i cant format it using unassigned devices..... previously the disk was used in a couple of other machines.... any insight on this?

I have managed to make all of the changes in the go file and everything is up and running with the docker container however i dont have the checkbox to tick in the transcoder in plex settings yeah i switched to advanced XD how can i get this

Sorry to bring up this thread ..... I have managed to make all of the changes in the go file and everything is up and running with the docker container however i dont have the checkbox to tick in the transcoder in plex settings yeah i switched to advanced XD how can i get this

Just a heads up guys tomorrow newegg will be having the 1700 for $160 My server is on an i3 4th gen might aswell bite the bullet and upgrade.... Anyone knows which motherboard to pair the cpu with ... perferably one without too much issues. Also i will need a GPU ... can i use one just for the installation and then move it into a VM ??? or is it required at to be installed all times ??

Hey guys i need some assistance regarding this docker maybe someone can point me in the right direction. I have nabaged to install everything and its working. now that i want to edit the config.yaml file i cant seem to get permisions on how to edit the file ..... what are you guys using to edit the file ? and also is there a way to ckeck if the configuration file is ok like via terminal ? i saw a couple of youtube videos but they all used the PI3 so i am a bit lost here . Any help would be appreciated

How long does the building a new image takes ? i have been stuck for almost half an hour and get no response from the server .... also would you recommend me to format my cache drive other than BTFRS Edit i had to reboot the server and now i cant mount the array i have been waiting for over an hour ..... damn this is now starting to worry me