hasole

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by hasole

  1. I've just upgraded and have a btfs cache pool with 2x ssd's. Now they are reporting as Unmountable: No file system Any help would be much appreciated. Thanks
  2. Thanks, i'm thinking along the same lines. The unit has space for 5 modular plugs. came with 2x sata and 2x molex leads with 4 connectors on each
  3. Hi is it ok to run 10 hard drives off one single modular plug? can't find any definitive specs this is for my ax650
  4. i understand the smallest switch is 8ports. looks like it might have to be a little 1810-8g
  5. Can anyone recommend a cheap switch to lag say 2 or 4 ports. 8+ port switch and pref quiet. I have a 24 port GbE procurve, but it sounds like a rocket.
  6. those are too cheap to not say no. thanks for the link!
  7. I have a thermal take armor VA8000SWA, which has 11x5.25, so you have to get 3x 5x3 and single 3x2. It also has the power supply turned on its side at the back, and it has 3 hard drives which can sit next to it. So in theory you could get 21 drives in it, if fully populated
  8. If you have a bunch of hard drives in 5.25 bays using brackets, is cooling necessary on them? I ask as my case has 11x5.25 slots, so I don't have a need for a 5in3
  9. that is exactly what it is called http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=342-0910 http://www.dell.com/downloads/global/products/pvaul/en/dell-6gbps-sas-ita-spec-sheet.pdf
  10. has anyone tried to use this card? it is apparently a lsi sas 2008 chipset in IT mode. it only has external connections. unlike the dell perc h200, which is the same card apparently running IR firmware and has 2x internal ports i’ve had a look and you can get sff-8808 cables to 4x sata, it would just mean it would have to go through an open pci slot in the case to get back inside.
  11. anyone tried these ones from plink/rackbuy? http://www.ebay.com/itm/3-x-5-25-to-5-x-3-5-SAS-SATA-HDDs-Aluminum-Hot-Swap-Cage-Backplane-NEW/390892081038?_trksid=p5411.c100167.m2940&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140131123730%26meid%3D8699009434449920088%26pid%3D100167%26prg%3D20140131123730%26rk%3D1%26rkt%3D15%26sd%3D111412458557 They look like istar tray less but don't have the holes in the front of the handle
  12. Hi Could someone recommend what i need to look for in a corsair or sea sonic psu that will give me the power consumption in ipmi. I think it needs a i2c connector? Thanks