Earache
-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Earache
-
-
-
I'm trying to clean up my system (get rid of unused media), but I'm running into an issue.
ScreenshotsI'm running BTRFS on my array, not sure what to do at this point. Any help would be appreciated.
-
Anyone using nzbToMedia?
I'm getting this error which causes everything to download but not process.
nzbToMedia: Exception TypeError: "'NoneType' object is not callable" in <bound method PosixProcess.__del__ of <core.nzbToMediaUtil.PosixProcess object at 0x148737796710>> ignored
-
3 hours ago, aptalca said:
Yes
Would this be done via the docker config the nginx config?
-
Can you use multiple domains with this?
-
-
Woke up to this message on Disk 4.
Here's the smart report
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.13-unRAID] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.2 (SATA 6Gb/s) Device Model: ST33000651NS Serial Number: Z294DBYY LU WWN Device Id: 5 000c50 04e5fed28 Firmware Version: G009 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 4 09:22:47 2018 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 451) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 076 063 044 - 47046185 3 Spin_Up_Time PO---- 091 091 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 418 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 9152996304 9 Power_On_Hours -O--CK 061 061 000 - 34756 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 53 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 47245361166 189 High_Fly_Writes -O-RCK 083 083 000 - 17 190 Airflow_Temperature_Cel -O---K 072 047 045 - 28 (Min/Max 21/31) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 36 193 Load_Cycle_Count -O--CK 100 100 000 - 990 194 Temperature_Celsius -O---K 028 053 000 - 28 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 016 009 000 - 47046185 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2223 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xd0 GPL,SL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 34751 - # 2 Short offline Completed without error 00% 31802 - # 3 Short offline Completed without error 00% 28972 - # 4 Vendor (0x70) Completed without error 00% 28316 - # 5 Vendor (0x71) Completed without error 00% 28316 - # 6 Short offline Completed without error 00% 28316 - # 7 Vendor (0x70) Completed without error 00% 26823 - # 8 Vendor (0x71) Completed without error 00% 26823 - # 9 Short offline Completed without error 00% 26822 - #10 Vendor (0x70) Completed without error 00% 26683 - #11 Vendor (0x71) Completed without error 00% 26683 - #12 Short offline Completed without error 00% 26683 - #13 Vendor (0x70) Completed without error 00% 26349 - #14 Vendor (0x71) Completed without error 00% 26349 - #15 Short offline Completed without error 00% 26349 - #16 Vendor (0x70) Completed without error 00% 26242 - #17 Vendor (0x71) Completed without error 00% 26242 - #18 Short offline Completed without error 00% 26242 - #19 Vendor (0x70) Completed without error 00% 25636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 21/31 Celsius Lifetime Min/Max Temperature: 21/54 Celsius Under/Over Temperature Limit Count: 0/2120 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (116) Index Estimated Time Temperature Celsius 117 2018-04-03 12:10 26 ******* 118 2018-04-03 12:20 22 *** 119 2018-04-03 12:30 25 ****** 120 2018-04-03 12:40 22 *** 121 2018-04-03 12:50 26 ******* 122 2018-04-03 13:00 22 *** 123 2018-04-03 13:10 26 ******* 124 2018-04-03 13:20 22 *** 125 2018-04-03 13:30 26 ******* 126 2018-04-03 13:40 22 *** 127 2018-04-03 13:50 26 ******* 0 2018-04-03 14:00 28 ********* ... ..( 3 skipped). .. ********* 4 2018-04-03 14:40 28 ********* 5 2018-04-03 14:50 27 ******** ... ..( 3 skipped). .. ******** 9 2018-04-03 15:30 27 ******** 10 2018-04-03 15:40 24 ***** 11 2018-04-03 15:50 26 ******* 12 2018-04-03 16:00 27 ******** ... ..( 3 skipped). .. ******** 16 2018-04-03 16:40 27 ******** 17 2018-04-03 16:50 28 ********* ... ..( 5 skipped). .. ********* 23 2018-04-03 17:50 28 ********* 24 2018-04-03 18:00 29 ********** 25 2018-04-03 18:10 30 *********** ... ..( 2 skipped). .. *********** 28 2018-04-03 18:40 30 *********** 29 2018-04-03 18:50 31 ************ 30 2018-04-03 19:00 30 *********** ... ..( 3 skipped). .. *********** 34 2018-04-03 19:40 30 *********** 35 2018-04-03 19:50 29 ********** ... ..( 4 skipped). .. ********** 40 2018-04-03 20:40 29 ********** 41 2018-04-03 20:50 28 ********* 42 2018-04-03 21:00 29 ********** ... ..( 5 skipped). .. ********** 48 2018-04-03 22:00 29 ********** 49 2018-04-03 22:10 30 *********** 50 2018-04-03 22:20 30 *********** 51 2018-04-03 22:30 29 ********** ... ..( 5 skipped). .. ********** 57 2018-04-03 23:30 29 ********** 58 2018-04-03 23:40 30 *********** ... ..( 3 skipped). .. *********** 62 2018-04-04 00:20 30 *********** 63 2018-04-04 00:30 29 ********** ... ..( 8 skipped). .. ********** 72 2018-04-04 02:00 29 ********** 73 2018-04-04 02:10 30 *********** ... ..( 2 skipped). .. *********** 76 2018-04-04 02:40 30 *********** 77 2018-04-04 02:50 29 ********** ... ..( 8 skipped). .. ********** 86 2018-04-04 04:20 29 ********** 87 2018-04-04 04:30 30 *********** 88 2018-04-04 04:40 29 ********** 89 2018-04-04 04:50 29 ********** 90 2018-04-04 05:00 29 ********** 91 2018-04-04 05:10 28 ********* 92 2018-04-04 05:20 28 ********* 93 2018-04-04 05:30 28 ********* 94 2018-04-04 05:40 29 ********** 95 2018-04-04 05:50 30 *********** ... ..( 6 skipped). .. *********** 102 2018-04-04 07:00 30 *********** 103 2018-04-04 07:10 29 ********** ... ..( 2 skipped). .. ********** 106 2018-04-04 07:40 29 ********** 107 2018-04-04 07:50 28 ********* ... ..( 3 skipped). .. ********* 111 2018-04-04 08:30 28 ********* 112 2018-04-04 08:40 29 ********** 113 2018-04-04 08:50 29 ********** 114 2018-04-04 09:00 29 ********** 115 2018-04-04 09:10 28 ********* 116 2018-04-04 09:20 28 ********* SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2239 Device-to-host register FISes sent due to a COMRESET 0x0001 2 2223 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 2223 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS
Is this drive dead? I've stopped the array, unassigned the disk, restarted the array. Then Stopped, assigned, restarted again.
Is there anything else I can try?
Side note: really pissed with newegg as I bought a 500gb SSD (cache) and this drive in November and looks like both are dead.
-
I'm getting this now...
Post-process-script nzbToMedia-nightly/nzbToNzbDrone.py ... failed (terminated with unknown status)
All the settings are correct so I don't understand what is happening here...
-
IPV6 not working at all. ifconfig does not show an IPV6 address at all, while unRAID has one set.
-
Has anyone setup a reverse proxy for Grafana? I've found a solution in the tutorial on reddit but it doesn't work.
I'll quote it so people don't have to go searching.
If anyone is still stuck set the env variable for the root url in the container to: root_url = %(protocol)s://%(domain)s:%(http_port)s/grafana and then use the following for the nginx.conf: location /grafana/ { proxy_pass http://IP_HERE:3000/; }
This doesn't work for myself. Anyone have a solution?
Quote -
Currently to access the support thread of any Docker container users have 3 options:
1)They can search here for their container support thread
2)Search for the container on Community Applications and click the Support Thread icon
3)Click the container under Docker Containers and going into edit.
I propose that an option on the Docker Container page be add to the context menu of the container, as currently there are 5 options as seen in the screenshot. I believe it would help, and container authors can set whatever they'd like as the link which should tie into the templates "Support Thread" setting, whether it be a forum thread or IRC channel etc.
Please make it so as this will improve UX while using unRAID.
PS I've been using this beautiful piece of software for over 4 years now and it's just come to my attention that this is missing.
-
7 hours ago, Diggewuff said:
Hey,
today I tried to switch my letsencrypt container from Bridge network mode to the new mode in unraid 6.4.0 where I can chose a dedicated IP for the container.
So far so good.
I've chosen a new ip 192.168.1.20 and changed the mapping of the ports 80 and 443 on my router to that new IP.
From then on I wasn't able to reach my domains from WAN anymore.
trying to access them from LAN is giving me that error:
Furthermore I'm not able to ping any ip dresses on my local network from inside of the container.
I already disabled every firewall rule on my Router.
Does anyone has an idea?
Are you getting this error outside of your network and/or internal?
-
On 12/15/2017 at 11:59 PM, jrdnlc said:
You have to start from scratch. You cannot upgrade from V2 to V3 since it's a complete rewrite
Care to PM me the template?
-
On 2018-01-19 at 9:15 AM, aptalca said:
Would you be willing to test that branch? It is currently untested. I can provide instructions, let me know
I would be willing to test it as the current container doesn’t work for me. I can’t find an answer to the question of does my ISP block port 80.
-
I'm trying to do this via the Nginx container and adding certbot to it but I'm stuck adding the cert to Nginx.
Anyone have a guide on how to do it this way (I believe people were doing it this way before).
-
8 minutes ago, aptalca said:
Your port forwarding is wrong. You are forwarding 81 to 80, you should be forwarding 80 to 81
Nope still get
Failed authorization procedure. sub.domain.org (http-01): urn:acme:error:connection :: The server could not connect to the client to verify the domain :: Fetching http://sub.domain/.well-known/acme-challenge/dcVgooswjuwm_DhQXskQSuKDbRdmN4qKyZTxbDzFg9g: Timeout
ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container
-
2 minutes ago, j123ss said:
Cox? Everyone with that issue seems to be port 80 ISP issue like they said. Same thing here and I have COX.
Rogers Internet (Canada).
They apparently don't block it so I don't know wtf is going on. I'm using an EdgeRouter Lite, so either my port-forwarding is farked or Rogers decided to block the port?
-
4 minutes ago, Brettv said:
Im getting the same, i believe my ISP is blocking port 80, which is causing the timeout.
Hmm, I'm not sure because this was working with duckdns.org before it broke, and now it won't even work with duck.
-
I'm trying to use my own domain (namecheap) but either I setup the DNS wrong or I'm missing something.
I have my docker on seperate IPs (example 192.168.1.4, .5,.6 etc) and I'm not sure if this is causing the issue or not. I have ports forwarded properly. If I run a dns lookup for the subdomain.domain I see my public IP, but I'm getting this error in the log:
Failed authorization procedure. subdomain.domain (http-01): urn:acme:error:connection :: The server could not connect to the client to verify the domain :: Fetching http://subdomain.domain/.well-known/acme-challenge/o9FHDJfbOQWeotQxma9kLk-AT5iRiBRyXXNKHn5zvgQ: Timeout, subdomain.domain (http-01): urn:acme:error:connection :: The server could not connect to the client to verify the domain :: Fetching http://subdomain.domain/.well-known/acme-challenge/mKVzhGyDzD0_QHj3YQ0fA4VW9tykyzkvdees4r9nTWw: Timeout, subdomain.domain (http-01): urn:acme:error:connection :: The server could not connect to the client to verify the domain :: Fetching http://subdomain.domain/.well-known/acme-challenge/jtizzEhlv4utMnBqMCauCIrR48_gkzx7kuak5JaWZH0: Timeout
IMPORTANT NOTES:
- The following errors were reported by the server:
Domain: subdomain.domain
Type: connection
Detail: Fetching
http://subdomain.domain/.well-known/acme-challenge/o9FHDJfbOQWeotQxma9kLk-AT5iRiBRyXXNKHn5zvgQ:
Timeout
Domain: subdomain.domain
Type: connection
Detail: Fetching
http://subdomain.domain/.well-known/acme-challenge/mKVzhGyDzD0_QHj3YQ0fA4VW9tykyzkvdees4r9nTWw:
Timeout
Domain: subdomain.domain
Type: connection
Detail: Fetching
http://subdomain.domain/.well-known/acme-challenge/jtizzEhlv4utMnBqMCauCIrR48_gkzx7kuak5JaWZH0:
Timeout
To fix these errors, please make sure that your domain name was
entered correctly and the DNS A/AAAA record(s) for that domain
contain(s) the right IP address. Additionally, please check that
your computer has a publicly routable IP address and that no
firewalls are preventing the server from communicating with the
client. If you're using the webroot plugin, you should also verify
that you are serving files from the webroot path you provided.
- Your account credentials have been saved in your Certbot
configuration directory at /etc/letsencrypt. You should make a
secure backup of this folder now. This configuration directory will
also contain certificates and private keys obtained by Certbot so
making regular backups of this folder is ideal.
ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the containerOn namecheap I have every subdomain as A +Dynamic DNS Record (using their DNS Client to update the ip). I'm really stumped.
-
I'm able to use subfolders without having to drill into each individual movie file.
So my file structure is sorted like this:
/mnt/user/unraidshare (or NFS share)/movies/moviequality/movietitle/movie.mkv
Sample:
/diskstation/media/movies/720ptemp/Shelter.mkv
I have my Radarr container setup in this way:
Inside Radarr, under Movies -> Add Movie -> Import Existing Movies on Disks, I browse to where I set my container/host path:
/media/diskstation/720ptemp/
Once my path is set, I Add (click the green checkmark) -> Close, and Radarr scans and recognizes them:
http://i.imgur.com/UR49PGO.png
This is a small folder with only 5-6 movies as a test bed for the import and recognize and so far so good. I added one of my larger shares, and it seems to recognize all of them.
My thoughts so far:
- It works! Indexers, Download client, Quality Profiles, Connections. I successfully upgraded a 720p file to 1080p and found a release on a indexer, and set to Deluge. We will see about importing once its done
- There doesn't seem to be a mass add/monitor feature similar to CP. I like the granuarity and control this offers but bulk additions would be great!
- Under Media Management -> Movie Naming you can't customize the movie folder the same way as the movie file (minor thing, but all my movies are sorted that way so I can easily see qualities at the top level without digging into the subfolder.
File: {Movie Title} ({Release Year}) {Quality Full}
Folder: {Movie Title} ({Release Year})
- Forms Auth works. I will be testing how it works under a reverse proxy (LetsEncrypt)[Edit: works!]
I've had to manually add them all, which is annoying.
- It works! Indexers, Download client, Quality Profiles, Connections. I successfully upgraded a 720p file to 1080p and found a release on a indexer, and set to Deluge. We will see about importing once its done
-
Not sure what you mean by not allowing VPN website access. Port forwarding is handled automatically if you are using PIA, and then only if you are using one of the gateways that has it enabled. If you are using another VPN provider, you will need to refer to their support to figure out if they even support incoming ports, many VPN providers don't.None of my private trackers are reporting I'm seeding/leeching. I set the report ip to my actual IP (seeing how they don't allow VPN website access). Is there something I'm doing wrong?Meaning when I'm on the trackers site, I'm not connected via VPN, therefore the docker reports whatever VPN I'm connected to (example 10.10.1.10) where my actual IP is 104.104.12.192. The tracker I'm using doesn't show me any stats (no ratio, dl, upld etc).
-
I can't seem to figure out what ports to forward, I'm using the default setup, anyone mind helping?
the only optional port to forward is for the web interface, and thats only if you want to get access to rutorrent whilst out and about. all other ports are talking over the vpn tunnel, so you dont need to worry about opening up an incoming/outgoing port on your router for torrent traffic.
None of my private trackers are reporting I'm seeding/leeching. I set the report ip to my actual IP (seeing how they don't allow VPN website access). Is there something I'm doing wrong?
-
I can't seem to figure out what ports to forward, I'm using the default setup, anyone mind helping?
-
Seeing how we have GitLab in the community app is nice, but the problem with GitLab, it's a memory hog. It will eat as much memory are you throw at it. There is alternatives such as Phabricator (which was developed as an internal tool at Facebook). The issue with Phabricator, it can be quiet annoying to set up sometimes.
There is Gogs, it's lightweight (can run a RPi), and fully functional. Is it possible to get this in the community apps?
Unable to delete Files/Folder
in General Support
Posted
MC worked. Thanks.