Dallas.toth

I had my VPN stop with the latest update as well. I too am using PIA. I refered to the github here. https://registry.hub.docker.com/r/binhex/arch-qbittorrentvpn and made the needed changes for PIA to use wiregard and now it connects to the VPN. added VPN_CLIENT = wireguard and Extra Parameters --sysctl="net.ipv4.conf.all.src_valid_mark=1"

https://www.elastic.co/blog/introducing-elastic-agent-and-ingest-manager Elastic has now added in 7.9 Endpoint Security which is installed via the Elastic Agent. https://www.elastic.co/guide/en/ingest-management/current/elastic-agent-installation.html Is there someway since Slackware doesn't support DEB or RPM to get the service installed and started on boot?

Correct I changed my paths in some of my docker containers that were using user and changed them to use the dir though the cache path

@trurl The same issue reported in this thread. I then found this post which I followed and moved some of the directories over from User to Cache I haven't hit the issue since then so I am hoping it doesn't come back.

This is still happening 6.8.3 the fuse fail caused all shares to drop. A restart is the only way I know how to fix it. Does anyone have a solution to fix this with out a restart. I tired to stop the array and start it and that didn't do it either. Is there a service to restart that will bring shares back when this happens?

This worked for me as well but another change I needed to make was using SeaBIOS becuase I was getting the shell terminal on Boot. I used this with the docker network.xyz container. You can also boot from a Network Controller being passed in just by adding <boot order='2'/> For my use I removed the bridge interface and used a passed in LAN card. Thanks

I had the same issue with Chrome and had to use Edge for the browser

Is there anyway to get the shares back with out a restart?

There isn't much to getting a world loaded. I change the server.properties > level-name=Midgard I have the Midgard Folder in the worlds folder. The Log shows the level as Midgard but when I login to the server all that loads is a small single island 2020-01-10 17:13:33.494987 [info] System information Linux 8f9409cbfca4 4.19.73-Unraid #1 SMP Thu Oct 3 20:57:25 BST 2019 x86_64 GNU/Linux 2020-01-10 17:13:33.520044 [info] PUID defined as '99' 2020-01-10 17:13:33.546832 [info] PGID defined as '100' 2020-01-10 17:13:33.707394 [info] UMASK defined as '000' 2020-01-10 17:13:33.732234 [info] Permissions already set for volume mappings 2020-01-10 17:13:33.760084 [info] Deleting files in /tmp (non recursive)... 2020-01-10 17:13:33.782863 [info] Starting Supervisor... 2020-01-10 17:13:33,927 INFO Included extra file "/etc/supervisor/conf.d/minecraft-bedrock-server.conf" during parsing 2020-01-10 17:13:33,927 INFO Set uid to user 0 succeeded 2020-01-10 17:13:33,929 INFO supervisord started with pid 6 2020-01-10 17:13:34,931 INFO spawned: 'minecraft-bedrock-server' with pid 50 2020-01-10 17:13:34,931 INFO reaped unknown pid 7 2020-01-10 17:13:34,937 DEBG 'minecraft-bedrock-server' stdout output: [info] Minecraft folder '/config/minecraft' already exists, rsyncing newer files... 2020-01-10 17:13:35,938 INFO success: minecraft-bedrock-server entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2020-01-10 17:13:36,507 DEBG 'minecraft-bedrock-server' stdout output: [info] Starting Minecraft bedrock process... 2020-01-10 17:13:36,565 DEBG 'minecraft-bedrock-server' stdout output: NO LOG FILE! - setting up server logging... 2020-01-10 17:13:36,565 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:36 INFO] Starting Server 2020-01-10 17:13:36,565 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:36 INFO] Version 1.14.1.4 [2020-01-10 17:13:36 INFO] Session ID d2831567-be3c-42a7-a627-2933e5a94e2a 2020-01-10 17:13:36,566 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:36 INFO] Level Name: Midgard 2020-01-10 17:13:36,567 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:36 INFO] Game mode: 0 Survival [2020-01-10 17:13:36 INFO] Difficulty: 1 EASY 2020-01-10 17:13:39,152 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:39 INFO] IPv4 supported, port: 19132 [2020-01-10 17:13:39 INFO] IPv6 not supported 2020-01-10 17:13:39,162 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:39 INFO] IPv4 supported, port: 58741 [2020-01-10 17:13:39 INFO] IPv6 not supported 2020-01-10 17:13:40,493 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:40 INFO] Server started. 2020-01-10 17:13:40,493 DEBG 'minecraft-bedrock-server' stdout output: [2020-01-10 17:13:40 INFO] Server started.

Any chance of getting Xteve VPN with Guide2go. I use the Xteve Guide2go Image and sure would like to have everything running though my PIA vpn. I use a Antenna as well as IPTV and the Guide2Go handles my Antenna program. Thanks

Has anyone been able to get this working. I've got the roundcube-postfixadmin container working but still have the above issues others have posted.

Thanks for this awesome Plugin and the Instructions worked perfectly. In one of the posts it says that it can be shared between containers. I am wanting to know if all I need to do is add the same 2 Variables to the jlesage/handbrake container to make use of the p2000 there as well. Will there be issues if 2 containers share the same GPU at the same Time? Plex is barely using up the available GPU. Thanks Again

Ya some of the posts I've seen end up with that as the final resolution. If I find anything I will be sure to follow up on this thread.

The Docker Setup I have I would say is very typical i am only running Un-raid Docker Containers no Docker Hub. The cause of my issue is when I install a Docker Container and decide I no longer need it and remove it and the container,image and the template.. It still leaves the /var/lib/docker/volumes/..... and /var/lib/docker/btrfs/subvolumes/..... that were created from that Container. As stated I have managed to find a script I can run to clean the Dangling = true volumes...Which now I only have 3 from the 100's that were in there, but in the subvolumes dir there are 300 folders many that are orphaned from old container installs. The Current btrfs command has the ability to list subvolumes and delete subvolumes but I need to find what subvolumes are actually orphaned/dangling. Thx.

I know many others have experienced crashes and out of space issues with Docker and BTRFS. I have managed to Fix issues with Dangling Volumes Containers and Images with scripts. (would be nice to have all that in a built in GUI.) But I am still having issues managing Subvolumes. My /var/lib/docker/btrfs/subvolumes are ever growing. I have seen posts about log files being the cause of this but what I have is orphaned dangling subvolumes. I came across this suse Snapper. https://build.opensuse.org/project/show?project=filesystems%3Asnapper Which looks like it would fit many of our needs when it comes to understanding btrfs and maintaining docker. I am willing to give it a shot by installing one of these packages but what OS would be compatible with Unraid.

No idea, post how you've got your container folder mappings set up and I'll take a look later tonight when I get home from work... FYI, I just installed it via your template, didn't mess with any other settings that was mentioned in this article: https://pydio.com/en/docs/kb/system/configuring-public-link-pydio-6 plz help me take a look at it volume mapping: http://i.imgur.com/oTazQ6x.png Share Settings in Pydio: http://i.imgur.com/HCqVGaf.png OK, I've never used Pydio and tbh I will not be using Pydio as I have no need for it. We support the container not the underlying application, so I probably won't be able to take this any further than this post. But your share settings in Pydio should not be set as /mnt/user/Pydio/public as in the container there is no /mnt/user/Pydio because it is a mapped folder and you have mapped it to /data Following this logic /mnt/user/Pydio/public should be /data/public. Always remember Linux is case sensitive too. I figured it out, your comment helped. Ty What I found out was there was no 'public' folder inside the 'data' folder, I had to manually create both the 'public' folder and .htaccess file, and edit it per Pydio documentation here https://pydio.com/en/docs/kb/system/configuring-public-link-pydio-6 sharing is working good now. However, i sometimes get "database is locked" error message, i'm using sqlite3, might switch up to mysql later on. I created both and my container is still unable to share files and documents. Still saying that there is no .htaccess file. Did you have to verify rewrite module? Same here getting the 404. I can create public links. So my download folder works I think. But i am not certain on my DL URL. "https://my_domain/data/public" or my htaccess in the (data/public folder) file is also FUBAR Order Deny,Allow Allow from all <Files ".ajxp_*"> deny from all </Files> <IfModule mod_rewrite.c> RewriteEngine on RewriteBase /data/public RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([.a-zA-Z0-9_-]+)\.php$ share.php?hash=$1 [QSA] RewriteRule ^([.a-zA-Z0-9_-]+)--([a-z-]+)$ share.php?hash=$1〈=$2 [QSA] RewriteRule ^([.a-zA-Z0-9_-]+)$ share.php?hash=$1 [QSA] </IfModule>

I just put the same container in my Docker and started getting the same issues.

for NZBGetVPN can you throw some connection entries into the Docker Log so I can ensure that my PIA VPN is being used? Thanks

Thanks for the update I know i asked earlier if you could get node-red-contrib-odbc in for me for a SQL Server connector. Not sure if you tried and was unsuccessful or not. Please and Thank-you

Thanks for Logstash works great. Have you looked into the integration with softflowd NetFlow export for PFSense. http://greptrick.com/2015/07/13/pfsense-netflow-and-elk-wgeoip/

node-red-contrib-odbc is a good all around MSSQL DB connector.

And some MSSQL ones as well. Looking to connect to a MS SQL DB for some big data querying. Thanks

Installing new nodes. How do I install additional nodes into you Docker for NodeRed?

I have a Corsair_Force_LS_SSD that has no Temp sensor. In fact it shows 100C. I would like to use the notifications in v6 but since this drive always shows 100 it comes in with urgent notifications. How do I ignore that drive (which is a cache drive) from my notifications so it only sends if the other drives fail or over heat?

I found a swapfile plugin but looks so far to be for Unraid 5. Anyone know if it works for 6 or if there is a version for 6 out there? Found Raid 6 - Basic for now only uses Cache Drive. I have a mounted appdisk that is an SSD and it doesn't support it ATM. Looks to be a active project though for this developer. Worth Watching. http://unraid.zeron.ca/plugins/swapfile/SwapFile.plg Found Unraid 5 https://raw.githubusercontent.com/theone11/swapfile_plugin/master/swapfile.plg