Mailman74

Members
  • Posts

    182
  • Joined

  • Last visited

Everything posted by Mailman74

  1. The fix common problems app shows 2 drives that are unable to be written to. I only use my server for media and do not mess with it too much as it usually runs fine. I am attaching the diagnostics here to see if anyone can help. Thanks so much tower-diagnostics-20220807-2113.zip
  2. I had my server built and do not know much about the troubleshooting. I had 2 failed disks and 2 parity drives. I replaced both failed disks and then removed one of my parity drives and upgraded my my unraid to Version 6.7.3-rc4. I think my shares disappeared before upgrading the version though. Guy who built my server is gonna fix it for me but wanted me to post this to get some opinions. He has a idea of what to do but wants to see what others think. I am attaching my syslog and diagnostics. Thanks so much for helpin tower-syslog-20191003-0018.zip tower-diagnostics-20191003-0017.zip
  3. I didnt know if there was a dedicated section to ask for help with reports. So I posted here a smart report of my drive that had 532 errors and is disabled by unraid. ST3000DM001-9YN166_S1F0LVLD-20161012-2003.txt
  4. I am sure there are people on here who can figure out what a site tracks. I am looking for help from someone with knowledge about tracking and internet security. If anyone is interested please PM me so I can discuss in more detail. Thanks
  5. I am on 6.1.9 Dunno then, your signature said 6.1.8.... Post some diagnostics. Ensure all your plugins are up to date as well. Community Applications especially. Also you could try installing the "Fix Common Problems" plugin and see if that throws any light on the information. The webUI is way out of date. CA if its installed is miles out of date, but the error itself isn't from CA, as the errors are on the dashboard
  6. There's at least going to be an update for the webUI (plugins - check for updates) install it and then post back (also wouldn't hurt to update to 6.1.9) I installed the webUI updates and went to docker and checked for updates. I still have the same error showing not available and the errors
  7. When I try to search for Docker updates I get an error saying Not Available. I am attaching screen shots to show it better, Thanks
  8. Looking for some help reading my pre clear results on 2 drives. I am still running preclear on 2 8 tb drives that I will post later. I am attaching the results here if I do not attach correct files let me know, thank you preclear_finish_150718RBF54A1515VYWP_2016-03-14.txt preclear_finish_Z300W5T7_2016-03-17.txt
  9. The problem is either my Supermicro SAS card or the sata breakout cables. I removed them and installed 2 rocket raid 2300's and my parity is now running at 100mb/sec and will be finished in 12 more hours. Thanks for the help
  10. I tried with your awesome help and patience. I will be near prostuff1 who built my server years ago and take it to him to see what he finds wrong. I was hoping to get it working with the help of the users here, thanks so much
  11. I removed the Norco that conataind the drives with the errors and replaced it with a new Norco that I had purchased for expansion. I also put the 8tb drive back in for the parity but I am still getting 3Mb/sec for parity sync. I am attaching a new diagnostic file tower-diagnostics-20160308-1439.zip
  12. Is that the only one you see getting the error. What file do you see the error in I tried looking
  13. Sorry, open with notepad and check time: Sorry for being such a noob. We only use our server for storage, plex and nsb grabbing. Havent gotten new shows in 3 weeks because of this, thanks for dealing with my lack of knowledge about this. I deleted a few folders to reduce size tower-diagnostics-20160308-1059_1.zip
  14. My diagnostic it too large to attach. Inside the logs folder there are 2 syslog files on syslog(133kb) and the other syslog.1(128kb). Should I delete one to make attachment smaller?
  15. Well parity sync speed are back to 3MB/sec anfd I attached an updated syslog to see if anything stands out, Thanks tower-syslog-20160308-1053.zip
  16. Sweet now drive 9 is mounted. It is attempting another parity sync now with speeds around 30MB/sec, should I let it sync for a little?
  17. I just swapped the paritys around and replaced some sata cables. The new drive that I was wanting to use for parity never got past 1% synced. So I figured to just put the old parity back in server. I booted up and now disk 9 is doing this.
  18. Ok I have moved around some sata cables and installed some new ones. I went and purchased a new psu also the Corsair CS750M. My parity syncs were still super slow and I ran an extended smart test on this drive and it passed and also ran a smart test on disk 10 that also passed. Problem is now that drive 9 ML0220F31BERTD is showing unmountable. I installed my original parity drive back into the server until I know what to do with this unmountable drive. I am attaching a new diagnostics report but I had to delete a syslog file because the attachment was too large. Thanks again tower-diagnostics-20160308-0736.zip
  19. All 3 of those disks are inside the same Norco SS-500 and I believe it is the oldest Norco I have.
  20. Thanks so much, my speeds are back to 3mb/sec. I am attaching the diagnostics zip file. I apologize for being such a technie noob and greatly appreciate the help everyone offers here. tower-diagnostics-20160306-1852.zip
  21. I had installed a rocket raid 2300 for the new norco ss500. I removed that from the system and now I am getting 30mb/sec. I checked all the wires and not loose connections. When I install the rocket raid do I need to do something in the bios? I am getting 20-30mb/sec but to be very honest I know replies say to post diagnostics but I do not know what that means.