Cessquill

Afraid that's not how this works. How did you upgrade to 6.8.2? If you went via an Unraid notification (or system tab), then you have uninstalled the DVB drivers. Go to the plugin, select 6.8.2 and install it. If you did upgrade via the plugin's page then this version doesn't look compatible with your setup and more investigation is needed. For a brief but maybe confusing explanation - this plugin does not install DVB drivers. It gives you access to custom versions of Unraid with the drivers added. Upgrading to vanilla Unraid (via a notification/system tab) will revert back to regular Unraid and remove those drivers. Therefore, the ONLY way to retain drivers and upgrade Unraid is to download and install 6.8.2 via the DVB plugin page. Mistake that a lot of us have made (myself included) - install plugin -> install custom Unraid -> Unraid is upgraded -> upgrade via normal route -> wonder where drivers have gone. If this isn't what you've done, apologies.

This showed up as number 2 on a Google search.

Try fully deleting them in NZB. Should get it to avoid the duplicate check when re-adding.

I just came here to ask the "is your time correct" obvious question. Glad it's sorted.

Thanks - it seemed to be a requirement/oddity when I originally set it up. Probably isn't now, and it's a job for the weekend to go through it again. Not sure why bouncing it to host and back would alter the GUI port though.

The Unifi Controller Docker occasionally needs running in Host mode. When I revert it back to bridge, a port has changed. I'm putting it here, as I don't *think* it's container specific (everything is done editing the template). Steps Set port 8883 to 8884 in the template (8883 is in use on my system by Heimdall)... System works, but temporarily need host mode to discover access points Switch to Host mode Can only access UI via port 8883, so temporarily turn off other docker using it Configure access points just fine Switch back to Bridge mode The read only container port in the template has mysteriously set itself to 8444. Can no longer access system, as there is no longer a port 8883 All I've done is switched to Host and back, and the read-only container port has changed from 8443 to 8444. I have to delete the container port and recreate it. This happened when I originally configured it last summer, but just happened again on 6.8.2. Is this an issue with Docker, an unfortunate side-effect, or am I being stupid? It's obviously not a huge issue, but it took me a while to work out why I lost access.

Be aware that 6.8.1 has an issue with the intel drivers that *can* lock your system on boot (not every boot and it is the same with stock Unraid). Mine had that issue, so I'm on 6.8.0.

I have two internal drives and they have always auto-mounted. Aside from this, I have not touched scripts with these drives - just using them as non-array-protected drives. Do I need to be concerned about changes to scripts? I'll set them to auto mount when I update later. Feature request: might it be possible for the home page refresh button to also update the free/used status of mounted drives? Appreciate that it's not part of Unraid's live page updates, but keep forgetting that. Quick switch to the tab - yep, space free. Reality - nope. Of course I could F5, so it's not that big of a deal.

Read the first couple of posts of this very thread.

Plus requires the base version installed, so if you need the features in Plus, you need to install both (unless it's changed recently).

I'd forgotten about all about this product. I've got 4 leads from a Sky LNB hanging behind my Unraid server doing nothing. Anybody using these in the UK with freesat? If so, would you need to use TVH and TVH Proxy to get it into Plex?

Any audio transcoding is still handled by the CPU, but that would be significantly lower. All video is GPU. I don't have a P2000, but there are a few videos where people have got about 12/13 4K transcodes simultaneously (although 4K transcoding doesn't look right yet). If it's 1080p stuff, more. I have the 1231 processor, and I find it's now only taxed if one of the other dockers has a moment. Plex just works, and if I get any holdups, it's usually either a system pause whilst a drive spins up or network congestion.

It's another Unraid build with driver support for TV tuner cards by CHBMB (predates Nvidia plugin). Fortunately, because of the rise of network tuners, choosing between the two builds isn't the end of the world.

You mean like Unraid Nvidia and Unraid DVB?

Hee hee. Interesting, thanks.

Good to see Squeezelite still going strong. Used to have it installed at work and stream music from home before the likes of Spotify and Plex came along. And IT clamped down on open ports.

Wow! Thanks for that. Haven't stopped by their forums in a while so this passed me by. I've installed it straight from the plugins, restarted and navigated to /material. Looks great and is snappy. If I get on with it on the desktop I'll make it the interface default.

Thanks for that - I use Squeezer, but it's worth a try. I used a HifiBerry on my Volumio project - just the audio interface, not the amp. Really impressed with it though.

Interesting. I use a three Squeezebox players at home (Radio, Receiver and SB3), but have had various alternatives over the years. One of them was a touch-screen O2 panel which I meant to sell on, but forgot). Plus Softsqueeze machines. The radio still wakes me up every morning. I use Volumio on a standalone Pi as a media player at gigs that can be controlled from a browser. However, haven't looked at it in a while (just set up and left it). As mentioned earlier, the receivers are the way to go for a "just works" solution. Once they're connected to your wi-fi, they're perfect. Also echo the fact that the Controller is awful.

Hi @tidusjar - sorry for contacting directly on here, but I'm not that good with Github... Since approx December, my weekly newsletter email is not including Movies - just TV. I raised an issue on Github (https://github.com/tidusjar/Ombi/issues/3342) which was auto-closed after a few days because of the template (not sure what I'm doing). Somebody else has the same issue, and pointed to log lines (which I have too) 2020-01-11 09:04:29.630 -07:00 [Error] StatusCode: NotFound, Reason: Not Found, RequestUri: http://api.themoviedb.org/3/tv/?api_key=b8eabaf5608b88d0298aa189dd90bf00 Anything wrong at my end?

Not the audio, no. AFAIK that's still the responsibility of the main system.

Or you could use midnight commander at the command prompt (mc)

As an aside, there is another way to trigger the interface, although I can't remember the specifics right now. Involves using the skin name in the URL. There might still be other skins installed (like "mobile"). Part of me still prefers the classic theme - much less code.

That looks like the classic skin - The Squeezebox interface from before Logitech got involved. From memory, settings, interface, web interface, select one of the others (default?).

(As a side note, a folder with many thousands of files in will take *much* longer to transfer than a folder with a series of sub-folders containing the same files broken into a couple of hundred in each folder. Long story short, a web-app I built lasted much longer than I expected - I hadn't really planned that an uploaded images folder would contain hundreds of thousands of thumbnails. Backing them up over FTP, many days. Rewriting system to store in sub-folders, couple of hours backup.)