bgeorge104

Mover logging has been disabled for quite a while. I was having a problem with it. I’ve fired up my old win10 vm to run Plex. Still don’t know what’s up with delugevpn?? Bernard Sent from my iPhone using Tapatalk

1004 is from this morning. 1801 is the latest. Thanks tower-diagnostics-20200218-1801.zip tower-diagnostics-20200218-1004.zip

Under the memory section docker is showing 80%. Plex wasn't working before the reboot & is still not working, can't open it webui page. Airvideohd, Binhex Krusader. The log was showing 100%. A reboot has cured that. But now I've a problem with Binhex Delugevpn, all my torrents are showing error. If i force recheck it downloads them all over again! But they do get seeded again. Even though I've been running unraid for a few years, I still feel new & at a loss on how to fix things, there's a lack of documentation other than initial setup that I can find. I need help, but in baby steps, please Thanks Bernard

Now it's working again, but I can't add any more folders. Very confusing.

Tried removing it & adding it again. removing settings from my phone still broken. Guess I'm going back to using VM.

Managed to get plex docker working & accessable outside home network. Also got air videohd working. tried adding another path & now its broken, can't access it all! That's the sort of thing that frustrates me about dockers. Even after removing the paths its still broken!

I found plex dockers to be not always accessible from outside my network. I've tried binhex plex & plex mediaserver, this is the one I've had most success with. If you know of better ones please let me know.

I have one vm, running plex. I do have plans to add another parity drive in the future, as well as swapping out some of the smaller drives. No Smart errors.

My Mistake! tower-diagnostics-20191225-1559.zip

tower-syslog-20191225-0226.zip

I thought I knew how to setup up shares in unraid, could never figure out how to make them read only for all but me. Dockers completely alien to me, I relied on watching videos from space invader, not the easiest to follow because of the colours used. Mover finished. Have posted log files. I'd love to get things sorted. tower-syslog-20191224-1323.zip

I use to use a vm to download torrent files, but the vm would lose it's connection to the server, meaning files were no longer being seeded. Id create another vm, torrents would download & mover would move them from the cache drive to the array, all was working till one day mover stopped working & just filled up. I then started using deluge vpn, worked ok, but i had to use krusader to manually move files from cache drive to array. I don't mind using deluge vpn but I'd like mover to do its stuff automatically. If I've to format the cache drive & start again so be it. Thanks Bernrad

That's the longest time I've seen mover running before I upgraded to latest os. Only browser I've open chrome with 28 tabs open, bit of a tab freak. I'm typing on my win10 vm, which is scanning my media libraries at the moment.

Yes, although I'm pretty sure there's nothing in the cache drive other than my docker data.

Where's the new thread? How do I correct my mess?

tower-diagnostics-20191223-2211.zip

Finally got round to updating to V6.8.0 Way easier & painless than last time I upgraded. Somebody said my docker image may be corrupt. I tried to use the backup plugin to backup following spaceinvaders video. Only when I run it nothing gets backed up. I want to format my cache drive & start again. Mover doesn't work, says disabled. I copied the data from the "root cache" it contains all my dockers to a folder on my array. I've also taken screen shots of the setting for each of the dockers so I can type them in again manually if the worst happens. If I format the cache drive I'm betting it won't be as easy as copying to docker folders back to their original locations? I've tried to create a log file, but it hasn't stopped, file size is getting bigger, it's over 8mb, I must've done something wrong. Thanks in Advance Bernard

I thought I’d try something I did before, swap out the cache drives one by one with a bigger one, starting the server each time a drive is changed. Worked before, not this time [emoji24] I’ve put the original drives back in but the docker service won’t start. I’ve tried turning it off & on no luck. The data is still there on the cache drive, if I put in the larger cache drives rebuild my dockers from scratch, get mover working, connect the old cache drives to unused sata ports on mobo will I b able to access them using binhex krusade ? While I’m at it I may upgrade will it break my vm? I can’t seem to find do’s & don’ts for upgrading unraid. This was the original cause of all my problems. Sent from my iPhone using Tapatalk

tower-diagnostics-20191021-2005.zip Here's the diagnostic zip after running mover. There are no dockers running, cache drive is full.

The share is set to use cache drive. When I click mover it says “disabled-mover is running” refresh the page it says “move now” Mover doesn’t work anymore that’s why I was using binhex krusader. The only thing way I can browse to the cache drive is from the main tab & clicking the folder icon extreme right under where it says view. Clicking through to find the right folder. But I can do nothing there? Sent from my iPhone using Tapatalk

Return from work to find out cache drive is full! None of my dockers are running, lack of space I presume. How do I get stuff off cache drive onto array? The folder where completed torrents go to doesn’t use the cache drive after mover stopped working. I’m stumped. I was binhex krusader to manually move stuff from cache to array. Is there a windows utility that I can use to move data from cache drive to array? Thanks Sent from my iPhone using Tapatalk

Now for some bad news. Return from work to find out cache drive is full! None of my dockers are running, lack of space I presume. How do I get stuff off cache drive onto array? The folder where completed torrents go to doesn’t use the cache drive after mover stopped working. I’m stumped. I was binhex krusader to manually move stuff from cache to array. Thanks Sent from my iPhone using Tapatalk

Some good news after the reboot win10 vm is working [emoji41] Sent from my iPhone using Tapatalk

I’m running binhex delugevpn, after files have been downloaded I want them moved to the array. I used to run a win10 vm to do my torrents but that kept losing connection to unraid shares & I couldn’t find a fix. How do I disable docker services other than me physically doing it myself? Old version of unraid, it was working, I upgraded to the latest version & everything stopped working! Sent from my iPhone using Tapatalk

tower-diagnostics-20191018-1657.zip After reboot & running mover once.