HKR

That folder is inside a share which is on the cache(SSD) which is used for downloading only through deluge & rutorrent dockers. This file was created from either one of those dockers and all other files ever created in that share gets moved or deleted just fine, only this first time i have had this error.

Not sure if i follow you correctly, is this screenshot what you are asking for?

Guys, I have got this wierd error where i cannot delete a folder from my share. It says some permission error, however other files/folder can be deleted just fine in that share. I have attached a screenshot, can someone pls help.

Sorry for the late reply guys, from what i see here my mobo seems compatible for VT. http://ark.intel.com/products/80796/Intel-Pentium-Processor-G3240-3M-Cache-3_10-GHz

Hello, I am looking to remove one of the Data disk (either disk 1 or 2) not yet sure. However this Disk will not be replaced by any other disk. Can someone tell me the procedure to remove the disk without loosing the data. Do i need to manually move data from the said disk to other? Thanks

Hi, I am trying to create a windows 7 VM, i selected the ISO and also downloaded the VirtLO drivers. I entered the required information while creating the VM however ever when i click create VM i get this error: Error creating VM: Cannot check QEMU binary a0cdd624-dad7-dd11-aa1b-f0795966d072x86_64NehalemInteltcprdma8047432none0dac0+0:+100+0:+100hvm32/usr/bin/qemu-system-x86_64pcpc-1.3pc-0.12pc-q35-1.6xenpvpc-i440fx-1.7pc-q35-1.5pc-i440fx-1.6q35pc-q35-2.1pc-0.11pc-1.2isapcpc-0.10pc-q35-1.4xenfvpc-0.15pc-i440fx-1.5pc-q35-2.0pc-i440fx-1.4pc-0.14pc-1.1pc-q35-1.7pc-i440fx-2.1pc-1.0pc-i440fx-2.0pc-0.13hvm64/usr/bin/qemu-system-x86_64pcpc-1.3pc-0.12pc-q35-1.6xenpvpc-i440fx-1.7pc-q35-1.5pc-i440fx-1.6q35pc-q35-2.1pc-0.11pc-1.2isapcpc-0.10pc-q35-1.4xenfvpc-0.15pc-i440fx-1.5pc-q35-2.0pc-i440fx-1.4pc-0.14pc-1.1pc-q35-1.7pc-i440fx-2.1pc-1.0pc-i440fx-2.0pc-0.13: No such file or directory Can anyone please explain what this means?

Hi, i asked this before also, could someone pls tell me how i can move torrents up/down my download queue? I cannot find any option to do so. Thanks

I found a strange problem, i dont see any option to move torrents up or down in the download queue. anyone notice this?

I've installed the Crashplan docker, setup this app on my Win PC which i need to backup and edited the properties.ui file with the unRaid box IP, however i cannot seem to get the backups to work. Any advice?

Just curious, but why not just utilize the built-in remote access features of Plex and avoid OpenVPN? I wasnt aware of such a feature existed, will take a look into it.

Tried deleting and re-installing docker still no luck.. anyone?

I've installed the dropbox docker and got it connected to my account just fine, it creates the folder on my unRaid correctly however it wont sync any files. Below is the log. Also, the dropbox container keeps crashing and it goes offline every few minutes. /usr/bin/tail -n 42 -f /var/log/syslog 2>&1 Mar 9 10:26:00 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:1025 ulen 1480 Mar 9 10:26:01 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:1025 ulen 1480 Mar 9 10:28:36 Tower emhttp: read_line: client closed the connection Mar 9 10:30:01 Tower logger: mover started Mar 9 10:30:01 Tower logger: skipping "apps" Mar 9 10:30:01 Tower logger: skipping "downloads" Mar 9 10:30:01 Tower logger: mover finished Mar 9 10:33:03 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:33:04 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:33:06 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:33:08 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:33:12 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:36:33 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:36:36 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:36:38 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:36:41 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:36:46 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:36:49 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:39:30 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:39:32 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:39:34 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:39:36 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:39:39 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:39:43 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:42:49 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:42:50 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:42:52 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:42:55 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:43:00 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:46:27 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:46:29 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:46:32 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:46:35 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:46:39 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:46:41 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:60679 ulen 1480 Mar 9 10:50:32 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:1025 ulen 1480 Mar 9 10:50:33 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:1025 ulen 1480 Mar 9 10:50:34 Tower kernel: UDP: bad checksum. From 71.85.52.62:57330 to 10.0.0.10:1025 ulen 1480 Mar 9 11:30:01 Tower logger: mover started Mar 9 11:30:01 Tower logger: skipping "apps" Mar 9 11:30:01 Tower logger: skipping "downloads" Mar 9 11:30:01 Tower logger: mover finished

I just installed Plex Server, however when i try to access it via my iPhone using OpenVPN it says 'You do not have permission to access this server' However the Plex GUI loads just fine. Do i need to make any config changes for this to work?

All right i get it, and how exactly does thie hidden folder work? If i set a Share as Hidden how do i access it? Or who all can access it? Do the same rules apply to this as well, same read/write rules? Just that its hidden correct?

One way to work around this Windows limitation is to refer to the network resource by name, and also refer to it by IP. Windows will consider these to be different network resources and will allow them to have separate logins. - What do you mean by this? Are you referring to Workgroups? Isint there a plugin or something that would make this whole shares & access process simplier? Maybe something which would prompt a login everytime a DIR is tried to access?

Yea, thats what i thought so, however it does not give me any prompt to login, so how do i access it as 'root' or any other user? EDIT: Instead of 'test' user if i name it the same as my windows pc username (windows pc does not have a password set) then i can access the share fine and copy files too. Does this mean i have to add every user on the network as their PC name?

I have setup this plugin on unRaid 6 and it works fine, i can connect to my unRaid from my iPhone, however when i try to go to my Tower IP, it takes me to my router login page, am i supposed to forward any ports? My initial assumption was i had to forward port 80, however i was told not to as it would leave my whole network vulnerable to a break-in. Pls advice.

- I am sorry, i meant i created a Share named 'Test' & a user named 'Test' as well. What are you going to the Tower on (is it your PC)? If you have set a username/password on the share then you will need to specify this username/password when connecting to the share from the PC. - Yes, i am trying to access the 'Test' share from Windows PC, however it does not ask me for a login, it just opens the 'Test' share but i am unable to copy and files to it.

Hey, I am trying to setup Shares with Security as to which user can access what Folder etc however i am unable to get it setup correctly. I created a share 'test' and also created a share 'test' and set it to Secure & Gave user 'Test' Read/Write permission. However when i go to my tower and try to copy files to the 'Test' DIR i am unable to do it, it says Permission is needed to do so. Does this mean i have to set a username & password to login to my windows PC as well? And only that user would have access to the DIR?

Disk 4: Disk: /dev/sde smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 5YD4YHA1 LU WWN Device Id: 5 000c50 03e0d7753 Firmware Version: CC32 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 5 10:37:01 2015 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 342) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 155601248 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 767 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 4331606884 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9594 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 755 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 048 045 Old_age Always - 30 (Min/Max 27/32) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 734 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 769 194 Temperature_Celsius 0x0022 030 052 000 Old_age Always - 30 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 036 009 000 Old_age Always - 155601248 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 105630425687345 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 714450761 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 659789449 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

hey guys, Just ran pre-clear on a few of my drives, can someone take a look and let me know if they are good to go. Disk 1: Disk: /dev/sdc smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 5YD4Z2TN LU WWN Device Id: 5 000c50 03e0bb439 Firmware Version: CC32 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Mar 3 15:27:17 2015 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 333) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 153199328 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 774 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail Always - 12917718228 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9524 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 754 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 068 047 045 Old_age Always - 32 (Min/Max 26/34) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 732 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 775 194 Temperature_Celsius 0x0022 032 053 000 Old_age Always - 32 (0 23 0 0 0) 195 Hardware_ECC_Recovered 0x001a 036 006 000 Old_age Always - 153199328 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 147240068850970 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1103622127 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3045207336 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Disk 2: Disk: /dev/sdd smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 6YD0Y70T LU WWN Device Id: 5 000c50 03dfffe17 Firmware Version: CC32 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 4 19:37:24 2015 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 612) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 331) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 165825160 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 776 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 37001928 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9545 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 758 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 049 045 Old_age Always - 30 (Min/Max 27/32) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 736 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 777 194 Temperature_Celsius 0x0022 030 051 000 Old_age Always - 30 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 036 008 000 Old_age Always - 165825160 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 3637837309203 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 101116939 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3455378606 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Disk 3: Disk: /dev/sdf smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD40EZRX-00SPEB0 Serial Number: WD-WCC4E4XV66XA LU WWN Device Id: 5 0014ee 2b6250389 Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Mar 4 05:56:42 2015 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (52380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 524) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 184 183 021 Pre-fail Always - 7766 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 46 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 205 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 12 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 255 194 Temperature_Celsius 0x0022 123 109 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Great news, thanks for the update.

That is what me and CHBMB figured out too, but we were not sure and were hoping you would reply here with a concrete answer One more thing, even if the update check works fine, there are still those missing directory errors.

Hey, I have been running into some wierd No such file/dir error while trying to check for updates on dockers. At times it works fine but most of the times the log has a LOT of errors and the version tab shows a 'not available' error. Below is the log file: CHBMB was very helpfull in sorting out a few issues i had via teamsviewer and he suggested i post here regarding these errors so someone might help out. Thanks

I have read through those posts however am still confused, there are all sort of mixed opinions in those threads. More and more users are surely leaning towards BTRFS due it being maintained well and it being new. But RFS has been around much longer so considered stable.