sunkenrat

Members
  • Posts

    25
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

sunkenrat's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Thanks i have tried The frist solution and unraid spin down my hdd as soon as it wakes up. ?
  2. I have installed dynamix sleep app. And I can put the computer to sleep and wake it up. But when it wakes up it spin up all drives. But unraid show them as spin downed. And it doesn't spin the hdd down again. Anyone know now what the problem might be?
  3. I have figured out the problem. I changed back to the old hardware, but then I got idle consumption at 90w. I tried move the computer from the extension cord and directly into the wall socket and I was back to the 35w. So changed back to new hardware and I now see around 35w on that. So it must be my watt meter that didn't like the extension cord with other items plugged in to.
  4. Hey I have run my Unraid server on following hardware. Motherboard: Gigabyte GA-F2A88XM-D3H Cpu: Amd 860K ram: 8gb psu 600W when I measured the idle power consumption it run at 30-38Watt But I got some new hardware from an another computer. Motherboard: gigabyte GA-z97p-d3 Cpu: Intel I5-4460 Ram: 8Gb PSU 600W But now my idle power consumption is 70-76W. Anyone know If this power consumption is normal with intel? I thought it would be more power efficient than Amd. But maybe I have overlooked some settings to make it all better.
  5. Hey, i have a little problem with my unraid server and the sleep function. I have installed dynamic sleep plugin, and when i put my server into sleep I go to sleep. I can then turn it on by wake on lan, when I does this my server turns on, starts all drives. But i does not connect to my network, I have tried put a monitor to my server but I get no input from the server. only things that works is power off and on again to get in contact whit the server. i am using a gigabyte motherboard and a 860k cpu. i have upgraded to newest firmware on my motherboard. but it is all the same.
  6. my problem was that the url I used I have chosen a couple of categories. each category had a number in the url and they was separated by , (like 120,121,122) But in the new version of sabnzbd they have changed it, so the , is used to separate if you want to use more than one url. So I have made one url to each category. Hopes it makes sense.
  7. Thanks for the answer. I found a solution on my problem, so it I solved now. But I still have another problem. I am danish and sometimes get nzb file names with æøå but sabnzbd can't no longer import them. I get and error UnicodeEncodeError: 'ascii' codec can't encode character u'\xe5' in position 36: ordinal not in range(128) anyone knows if anything is changed recently?
  8. Is there any way I can revert back to a older version of sabnzbd? I have updated to newest version and now the rss link from my index site doesn't work anymore.
  9. Thanks I try run another check and see if the errors disappear.
  10. I hope these are the correct things. diag.zip
  11. Yes I have always have checked in (write corrections to parity) should I run a new parity check the last one finished about 5 hours ago can that bee used? I haven't rebooted after.
  12. I have now tried to run a parity check twice and I got 9 errors both time. I can't se anywhere what the errors are. But now I can see that one of my harddrive have a smart error. Reported uncorrect 0x0032 099 099 000 Old age Always Never 1 I am running a long test on the disk right now. But I am not very much into all these numbers. Should I bee worried about the disk? I have attached the smart log. ST2000DM001-9YN164_Z1E1QHGE-20170101-1312.txt
  13. Sounds like a question for NZBGet support rather than for this docker. Have you tried searching or asking there? I have searched but not found anything. But i will try asking there.
  14. Hey i am new in nzbget, i have used sabnzbd all the time. But i am now trying to move to nzbget that i have problems with sabnzbd. I have it all up and running, but i keep getting an error when i paste in the rss feed from my index site. i get this error: Error parsing rss feed: Unsupported encoding windows-1251 anyone knows what wrong? and maybe know how i can fix it?