Strider

Hi there Falkens, So, I stopped the existing Sonarr application. I then added Binhex's container and created the new Sonarr application. I mapped the same drive destinations as the previous application. Once this was done, I created it and allowed it to download accordingly. When it was ready I just started it and double checked all was working. Following that, I stopped the app and moved the files from the old Sonarr installation destination to the new. The files I moved was generally all the ones with *.db. Once moved, I started Sonarr and all was working. I did need to reconfigure the indexers, but that was easy. Hope that helps?

Ok, so, I have managed to install your Sonarr, and copied over the DB and config files and all appears to be working. I am wondering if this was down to a MONO issue running on the other Sonarr. Without your help, I wouldn't have figured this out. So thank you for your help.

Ah too true, sorry for messing you around. It appears to be Needo's. Right, assuming I should change my repository to your version to try and resolve my issues. If this is the case, how can I go about this without breaking the whole setup of Sonarr?

Just another extract of the error log from Sonarr, if this helps. Request Failed. POST /api/release: Syntax Error after '<!' characters. http://www.newzbin.com/DTD/nzb/nzb-1.1.dtd Line 2, position 4. System.Xml.XmlException: Syntax Error after '<!' characters. http://www.newzbin.com/DTD/nzb/nzb-1.1.dtd Line 2, position 4. at System.Xml.DTDReader.CompileDeclaration () <0x00373> at System.Xml.DTDReader.ProcessDTDSubset () <0x00127> at System.Xml.DTDReader.GenerateDTDObjectModel () <0x00267> at Mono.Xml2.XmlTextReader.GenerateDTDObjectModel (string,string,string,string,int,int) <0x00337> at Mono.Xml2.XmlTextReader.ReadDoctypeDecl () <0x001b3> at Mono.Xml2.XmlTextReader.ReadDeclaration () <0x0009b> at Mono.Xml2.XmlTextReader.ReadContent () <0x0019b> at Mono.Xml2.XmlTextReader.Read () <0x00237> at System.Xml.XmlTextReader.Read () <0x000b2> at Mono.Xml.XmlFilterReader.Read () <0x0001a> at Mono.Xml.XmlFilterReader.Read () <0x0001a> at Mono.Xml.XmlFilterReader.Read () <0x00087> at System.Xml.Linq.XDocument.ReadContent (System.Xml.XmlReader,System.Xml.Linq.LoadOptions) <0x0011e> at System.Xml.Linq.XDocument.LoadCore (System.Xml.XmlReader,System.Xml.Linq.LoadOptions) <0x00047> at System.Xml.Linq.XDocument.Load (System.Xml.XmlReader,System.Xml.Linq.LoadOptions) <0x000af> at System.Xml.Linq.XDocument.Load (System.Xml.XmlReader) <0x0000f> at NzbDrone.Core.Download.NzbValidationService.Validate (string,byte[]) <0x000af> at NzbDrone.Core.Download.UsenetClientBase`1<NzbDrone.Core.Download.Clients.Sabnzbd.SabnzbdSettings>.Download (NzbDrone.Core.Parser.Model.RemoteEpisode) <0x00657> at NzbDrone.Core.Download.DownloadService.DownloadReport (NzbDrone.Core.Parser.Model.RemoteEpisode) <0x004c5> at NzbDrone.Api.Indexers.ReleaseModule.DownloadRelease (NzbDrone.Api.Indexers.ReleaseResource) <0x000c9> at NzbDrone.Api.Indexers.ReleaseModule.<.ctor>b__7_0 (object) <0x0002b> at (wrapper dynamic-method) object.CallSite.Target (System.Runtime.CompilerServices.Closure,System.Runtime.CompilerServices.CallSite,System.Func`2<object, object>,object) <0x000a0> at Nancy.Routing.Route/<>c__DisplayClass4.<Wrap>b__3 (object,System.Threading.CancellationToken) <0x00137>

Here is a grab of the console.

Sorry, ignore Radarr, Wrong screengrab. It was in Sonarr.

Yes, 100%. See small grab...

Hi Uncle, I am 90% sure this is related to Sonarr. Other applications are working fine, and if I manually search and add the file Sonarr then notices it in SAB and processes it accordingly. It comes down to Sonarr not searching for new releases based on that previous error I mentioned.

Hi Binhex, Thanks for helping on this. So, first problem. Copy and pasting that command I get "sh: 1: /root/aor.sh: not found". Maybe a cause for this?!?

Thanks for the response. I have tried multiple indexers, and removed and re-added, to no avail. Same error. I was down the Mono path only because it appears to be related to a number of recent incidents. This all started appearing out of the blue from 2 days ago. What else could I supply you that may help figure what this is? Again, thanks for responding.

Anybody help me on this, as everything is frozen up at the mo with Sonarr?

Hi everyone, I hope that you can help me out here. So, just over the past few days Sonarr has stopped grabbing new stuff. I have looked and I get the below exception error when trying to manually or automatically grab new shows. [v2.0.0.5163] System.Xml.XmlException: Syntax Error after '<!' characters. http://www.newzbin.com/DTD/nzb/nzb-1.1.dtd Line 2, position 4. Now, I have been looking around and this does appear to be an issue with the latest update, and then the older version of Mono. The fix relates to updating Mono to the latest version (https://forums.sonarr.tv/t/xmlexception-syntax-error/18599). Now my super noob status comes into play (Sorry). How do I update Mono to the latest version (5.12)(http://www.mono-project.com/download/stable/#download-lin) in Unraid container for Sonarr? Current Unraid version: 6.5.2 Current Sonarr version: 2.0.0.5163 Can someone help me out with this? Thanks in advance.

Anyone have any ideas? I have tried the card in a windows machine and that works. It is being picked up in UnRAID but it's just not showing me my drives. I have 2 5TB drives waiting to get in... I also tried the script the ekly14 put together but still no joy.... any help please?

I have triple checked that as that was the reason my other card didn't work... RAID. This card does not support RAID at all. I am so stuck... annoyed... etc. Looks like you cannot even purchase a 620 in UK. This is going to drive me nuts I tell you :'(

Yes, I see alot of people have the 620, but I was unable to get that model. but the 620 and 620A are like for like. Same Marvell chipset and both AHCI.

Thanks for the note and I will keep that in mind. But I am sure I can get this one working as a couple other users are running a HighPoint 620 successfully. Also, i stay in the UK and it doesn't look like that card is locally available!

All, I have confirmed that the card is POSTing and in the POST screen it is reading the WD drive that I have connected to it. I have also confirmed that this is reporting in my UnRAID config (see below line 02:00.0). I have tried that patch for AHCI cards and adding the script to my GO script to no joy... Really frustrated as my server build has ground to a halt as I cannot add any more drives to the server. This is my second SATA controller card and no to keen to purchase another. 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller 00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1 00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0) 00:1c.1 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 2 (rev d0) 00:1c.2 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 3 (rev d0) 00:1c.3 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 4 (rev d0) 00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1 00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller 00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode] 00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller 02:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12) 02:00.1 IDE interface: Marvell Technology Group Ltd. 88SE912x IDE Controller (rev 12) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) 04:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41) Can anyone offer some support please?

Hi all, Did any of you come right in getting that card to work? I am now on my second controller card and no joy. The second card that I purchased was a HighPoint 620A 2 port Sata card. Another member here the card works for him and I have been trying to trouble shoot this with him... My card POSTS and in the POST I can see the attached 1TB Western Digital drive, however in UnRAID I get no joy at all... Below is a grab of my system specs... as you can see below line 02:00.0 the card is being picked up in UnRAID. I have tried the script as well to no joy. I am running UnRAID V6.0.0. Any ideas are very welcome as I cannot continue with my server build without being able to add additional drives and I am on my second controller card... 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller 00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1 00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0) 00:1c.1 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 2 (rev d0) 00:1c.2 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 3 (rev d0) 00:1c.3 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 4 (rev d0) 00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1 00:1f.0 ISA bridge: Intel Corporation 9 Series Chipset Family Z97 LPC Controller 00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode] 00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller 02:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12) 02:00.1 IDE interface: Marvell Technology Group Ltd. 88SE912x IDE Controller (rev 12) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) 04:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)

Good day all, I am having trouble with a SATA controller card. This is the second one I am now working on and to no joy. I have been through the forums and settled on a HighPoint 620A as some users have posted that this works. However, I received mine last night, plugged it in and no drives appeared in UnRaid V6.0.0. I reviewed the forums in more detail to find that I need a script in order to initiate the card. Added the script and amended the GO script, rebooted and no joy. I am now at a loss on my second card, but some people have said it works out the box... How? Anyone have one of these cards and managed to get them working? Thanks in advance.

Hi all, yes running latest version of UnRAID V6.0.0. I have been scouring around to try find a firmware to flash the RAID off the drive but to no avail. Went into the RAID management <ctrl+m> but no option to remove RAID. So a dud card then... Ordered another card with 2 ports SATA. This is a non RAID which arrives on Monday. I am sure this will do the trick.

Did you manage to get the Lycom PE-120 card working. I have just purchased a very similar based build. But I am having issues with UnRaid picking up any drives attached to the card. The card is working as I can go into the BIOS and play around with some RAID options. Not many options to play with, but otherwise UnRaid doesn't pick up any drives attached to it. Keen to know if yours is working and how you got it working.