TopTrainer

Hi Jorge Thanks for the reply and also the link. I am pleased to say I have now managed to update both servers to 7.01 and both appear to be operating as I would expect at this time. Thanks Pete

I thought I had solved this issue, but it appears that I have not, currently I cannot access the server via GUI with out rebooting the windows machine while the server is running. This appears to allow me access just for the session while the server is up. I also tried to update the OS and the server network connection failed. I really do not know why as my other server work perfectly, clearly there is some sort of issue but I do not know where. I have attached another after I tried to update the OS. Pete trooper1-diagnostics-20260208-2301.zip

Hi Jorge Thanks for your prompt reply as always, there was not a reboot prior to the diags, I believe I have sorted the issue now myself, I think it would appear to have been caused my file manager having a moment I have been running for the last 2 hours without issue. Thanks Pete

I seem to have developed some instability issues on one of my servers, in that the server contact is completely lost as is the GUI at the time of instability, after a period of time it appears to return to normal. Notable things are; that at the time my other server is still accessible and working fine, I also lose the ability to close the server down without a hard close. Which leads me to think the network must be ok, and perhaps there may be a lurking individual server issue. This has only occurred for the first time in the last 12 hours. Windows 11 6.12.10 Regards Pete trooper1-diagnostics-20260206-1120.zip

New disk is rebuilding as I type.

Happy new year, im back, am I right in think, as the contents are emulated, and the disk 4 is mounting, can I just remove the disk and replace it with a new larger one, or do I have to rebuild the original unreliable one first?

The contents look correct to me, like you, I have lost confidence in the disk, I know the disk is old, nothing else was done to the disk, I do have a new disk that I could slot in there, though I am away overnight for new years eve, so it might be pertinent to leave till my return please remind me of that procedure, as it is not a regular occurrence for me.

I can confirm the contents are emulated.

tower-diagnostics-20251230-1242.zip

I was wondering myself if this might be an option to try, I don't think I have anything to loose by trying it do I? the disk is dead in the water presently. What is the preferred method of disabling to invoke emulation?

Would be specifically for Linux or windows, I presume it has to be loaded into windows to access?

I can definitely confirm that the data was written to the drive, I simply moved the data back onto the drive from an empty drive on my other server using Tera copy pro, I had done it 13 times previously.

It seems I had issues with this particular drive back in October when I originally undertook the conversion, it appears that there were credential issues caused by windows 11 preventing the conversion, you found a solution for those issues back then, I am wondering if windows has caused another problem here?

The previous command did not find the required result, I have applied the above command via the terminal it also proved fruitless.

-V is still running, Phase 1 has found a bad primary superblock - bad magic number, attempting to locate a secondary, verify superblock continuing.

Am I applying xfs_repair -v /dev/md4p1 in the file system status box ? if so , access is only possible in maintenance mode or is this in the terminal?

Hi Jorge Thanks for your reply, do you mean with the array started in maintenance mode, ?

Hello I need some advice on how to proceed with an issue that I have just discovered which likely has been there a while, my secondary server which is fairly old had all reserf drives and I realised I needed to convert to xfs a bit quick to avoid the cut off. As far as I was aware things had gone fine, but on starting today for the first time after a long period after the initial convert I appear to have Drive 4 showing unsupported or no file system, furthermore the format option is being displayed. It is suggesting to me that the drive was not formatted before the data was transferred back, I cant imagine that I would have done that, as I had completed the process on all the other disks, but I cant rule that out. But in any event I do not have the data previously moved to facilitate the conversion. Unraid 6.12.3 Windows 11 tower-diagnostics-20251229-0918.zip

Applied this, rebooted server, checked the ls + removed access gained. Thank you.

I have run the new permissions tool on Disk 4, sadly the + is still present after rebooting and running the ls command

Am I able to run the New Permission tool just on Disk 4 without the rest of the other drives? I do not see a folder on that drive called appdata.

root@Tower:~# ls -la /mnt total 16 drwxr-xr-x 20 root root 400 Oct 15 10:30 ./ drwxr-xr-x 20 root root 420 Oct 15 07:55 ../ drwxrwxrwx 6 nobody users 140 Oct 15 10:30 RecycleBin/ drwxrwxrwx 1 nobody users 96 Oct 15 08:05 cache/ drwxrwxrwx 8 nobody users 127 Oct 15 08:05 disk1/ drwxrwxrwx 6 nobody users 69 Oct 15 08:05 disk10/ drwxrwxrwx 6 nobody users 69 Oct 15 08:05 disk11/ drwxrwxrwx 6 nobody users 69 Oct 15 08:05 disk12/ drwxrwxrwx 7 nobody users 86 Oct 15 08:05 disk13/ drwxrwxrwx 7 nobody users 86 Oct 15 08:05 disk14/ drwxrwxrwx 6 nobody users 90 Oct 15 08:05 disk2/ drwxrwxrwx 7 nobody users 110 Oct 15 08:05 disk3/ drwxrwxrwx+ 9 nobody users 248 Oct 15 08:05 disk4/ drwxrwxrwx 7 nobody users 86 Oct 15 08:05 disk5/ drwxrwxrwx 5 nobody users 72 Oct 15 08:05 disk6/ drwxrwxrwx 4 nobody users 39 Oct 15 08:05 disk7/ drwxrwxrwx 6 nobody users 74 Oct 15 08:05 disk8/ drwxrwxrwx 6 nobody users 118 Oct 15 08:05 disk9/ drwxrwxrwx 1 nobody users 127 Oct 15 08:05 user/ drwxrwxrwx 1 nobody users 127 Oct 15 08:05 user0/ root@Tower:~# Disk 4 appears to have a + sign none of the others do.

Hi Jorge Where would I find, ls -la /mnt info ?

I have been converting my secondary older server from RS to XFS, I have done successfully all but one (Disk 4), it appears Windows 11 credential manager is refusing my credential access to Disk 4 only. Previously access in Windows 10 was not an issue, the Tower is running Unraid 6.12.3 and I have attached a diag file hopefully someone could analyse for any clues as to why. Thanks T.T. tower-diagnostics-20251014-2335.zip

im getting nowhere fast, the network path cant be found!