zapp8rannigan

Members
  • Posts

    86
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

zapp8rannigan's Achievements

Rookie

Rookie (2/14)

0

Reputation

  1. Thanks for your reply, sorry i don't think i explained myself very accurately to be honest, I wasn't actually copying cache to a specific disks I was still using shares. My downloads folder is set to use the cache drive only and then the folder i was copying to would of been the cache again but then would of been sent to the array later as normal. Seems very odd, it never used to copy this quickly.
  2. I've just started to get a weird issue in Krusader. The files i'm copying from my Cache drive to my array are transfering instantly, which might sound amazing but it doesn't seem right to me? The cache drive is btrfs and the array is XFS and when i copy files in MC it still takes a bit. For example a 13gig folder took about 3 secs in krusader and around a minute and a half in MC. Should I be worried??
  3. Okay, Been trying a few different things, nothing working so far. Tried the force probe as shown in your notepad screenshot. no joy tried the same again with "options i915 enable_guc=2" also added, and also tried deleting them and adding i915.force_probe=4c8a to the syslinux config Nothing working. Just got to your post asking the guy to run: root@computenode:~# modprobe -c | grep force_probe root@computenode:~# dmesg | grep i915 lsmod | grep i915 I've just done that but can't see any errors? root@Babs:~# dmesg | grep i915 lsmod | grep i915 [ 26.369731] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 26.373454] i915 0000:00:02.0: vgaarb: deactivate vga console [ 26.375489] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 26.379702] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_02.bin (v2.2) [ 26.495381] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_49.0.1.bin version 49.0 submission:disabled [ 26.495385] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.5.0.bin version 7.5 authenticated:yes [ 26.508315] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 26.544716] fbcon: i915 (fb0) is primary device [ 26.612950] i915 0000:00:02.0: [drm] fb0: i915 frame buffer device i915 2396160 1 iosf_mbi 16384 1 i915 ttm 69632 1 i915 drm_kms_helper 245760 1 i915 drm 487424 4 drm_kms_helper,i915,ttm intel_gtt 24576 1 i915 i2c_algo_bit 16384 2 igb,i915 i2c_core 86016 7 drm_kms_helper,i2c_algo_bit,igb,i2c_smbus,i2c_i801,i915,drm video 49152 1 i915 backlight 20480 3 video,i915,drm root@Babs:~# root@Babs:~# lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation RocketLake-S GT1 [UHD Graphics 750] [8086:4c8a] (rev 04) root@Babs:~# root@Babs:~# ls -la /dev/dri total 0 drwxrwxrwx 3 root root 100 Apr 10 00:06 ./ drwxr-xr-x 16 root root 4000 Apr 10 00:08 ../ drwxrwxrwx 2 root root 80 Apr 10 00:06 by-path/ crwxrwxrwx 1 root video 226, 0 Apr 10 00:06 card0 crwxrwxrwx 1 root video 226, 128 Apr 10 00:06 renderD128 Hmm feel like it might actually be working now....just had a mess about on plex and it appears to be transcoding with the igpu. Just going to try booting into gui mode now.
  4. Sorry i don't understrand, whats the difference? other than mine lists the UHD750? As for the logs which ones am i looking for, i've trying the system logs under tools but theres nothing there that mentions i915 Would my diagnostics help? I've just tried to reboot with the conf file in modprobe but no difference. Starting to think its this motherboard, I've had issues with ASUS boards in the past, I'm on the current firmware but still no joy babs-diagnostics-20220409-1413.zip
  5. Yep its listed there. I've just had a look in the modprobe.d folder under config and its empty...could that be my issue? When i load into gui mode i just get a black screen and a flashing text line at the top
  6. Thanks for replying. I'm on 6.10rc2, do I need to do the above as well? Or is that also pre rc2?
  7. Hi all, I don't think this is actually an unraid problem but i'm not sure where else to turn. I'm trying to get my igpu to be recognised. I think i have my bios setup correctly (screenshot). but when i type cd dev/dri nothing is coming up. Any ideas? Specs are i5-11600 with an Asus Prime Z590-A
  8. Ok thanks I think I understand. So; 1: purchase Pro licence. 2: Backup Flash 3: Copy flash contents to new flash drive heres where i'm unsure: 4: stick new flash drive in new server and migrate the current active pro key over to that one OR 4: Put the new flash drive in my current server minus Plus.key file? if the former 5: delete pro key from the config folder and boot up the server, assume it will say no key so then add the activation code for the Pro licence if the latter 5: boot up that server and add the pro licence. Now i've written it down it sounds like both methods would be okay? Thanks again just wanting to be sure i have the right idea
  9. Hi, Got a quick question. I'm looking at building a backup server and i'm wondering if i could transfer my current licence (plus) to that sever and purchase a new licence (pro) for my main sever. Or do I need to upgrade my current plus licence to Pro and then purchase another plus licence?
  10. Howdo, Sorry to weigh in here, so is the 11th gen fully supported now? including HDR tone mapping? keep reading mixed things and different methods, would rather stay on a stable build of unraid at the mo.
  11. Hi all, Hope i'm putting this in the right thread! Just started having problems with Komga today. Logs show: 21:10:38.293 [main] ERROR org.springframework.boot.SpringApplication - Application run failed Its been working fine, don't recall changing anything?
  12. I'm currently using wireguard to access my home network but i was local this morning and it wasn't working then either on the same ip range... I assume I wouldn't be able to access the webui at the moment because its in debug mode?
  13. Thanks Binhex added here, removed my login details from the top. supervisord.log
  14. No joy, same errors on the log file: 2021-04-14 13:31:45,778 DEBG 'start-script' stderr output: parse error: Invalid numeric literal at line 4, column 0 2021-04-14 13:31:58,024 DEBG 'watchdog-script' stdout output: [info] No torrents with state 'Error' found (though that one sounds like a good thing?) 2021-04-14 13:31:46,489 DEBG 'start-script' stderr output: Warning: `/config/wireguard/wg0.conf' is world accessible And this one is just a warning but is it something i should be worried about?
  15. I'm not using OpenVPN anymore, i've switched to wireguard so no longer using france, according to the wg0.conf I'm using nl-amsterdam.privacy.network