JWMutant

Morning/Afternoon all, I had up until yesterday been using three SSD's as my cache drive. I had 1 x 240 G and 2 x 120 G I cant for the life of me remember how I did it as its been well over a year since I set it up but it was set up to show 1 cache drive 480 odd GB in size. Well the 240 GB drive crapped itself yesterday leaving me with the 2 x 120 GB drives. The problem is I am having issues getting the cache drives to mount. I would have thought that creating a new config and retain the parity drive and data drives only would allow me to basically start a fresh cache pool but this doesnt seem to be the case. I little help on how to get the cache pool back up and running would be much appreciated. If I can save the data that was on it even better but Im not holding my breath. A side note, Im a hardware man so if It requires me using command lines and what not please be patient and dumb it down for me. tower-diagnostics-20171111-0823.zip

For starters set your CPU Scaling Governor to "Performance". My Intel® Xeon® CPU E5-2683 v3 has a base clock of 2.00 GHz.

I know this question was visited back when v5 was the rage, however could not really find a clear answer. I want to be able to delay plugins starting. Is this even possible? I like the Docker Auto start manager that is available and am hoping it is as simple however I get the feeling its not that simply. Can someone give me some direction please. I noticed a reference to unraid_addon_control.sh back in v5 but was unable to find such a file when doing a search for it on the flash drive.

Just out of interest what Dockers have you got running? I ask purely because I know for a fact that some dockers running while your trying to do a sync or even just a parity check will drop the speed..... and not by a little bit but by alot.

Honestly the 2683 v3 is the best bang for buck imho. 14 core 28 thread supports ddr4 ecc and you can pick them up off eBay for AU$350-400 Sent from my iPhone using Tapatalk

If you still need help with this let me know as I have spent some time getting the perfect pfsense vm running on unRAID with a fallback if unRAID craps itself for some reason.

I’m wondering if “route add default gw 192.168.1.254 eth0” will work Sent from my iPhone using Tapatalk

Im working on a project a the moment which short story requires me to update the gateway without taking the VM offline.

Thank You. Do you happen to know if there is a way to update the gateway without doing a reboot?

Evening all, Just a quick question for those who know. Does anyone know how to update the DNS via ssh? Im not that crash hot with my linux commands... my knowledge doesnt go past ifconfig. :-) But if there is a way to flush and update the DNS via ssh would someone be able to post up a idiots guide on how to do so. Appreciated.

I want to run up a test VM and im trying to pass through a Qualcomm Atheros AR9462 Wireless Network Adapter. It shows up in "Other PCI Devices" no problems. It shows up as being in its own IOMMU group as well. But when I go through the settings for creating a VM and click the Qualcomm and create the VM unraid locks up and losses connection. I cant even SSH into unraid and can only fix it but doing a hard reset. Any ideas?

I have a question which may sound a little odd. I have a few VM's running which use a network bridge. But I am going to be running a third VM which I dont want it to use the network bridge at all as I will be using a NIC that will be passed through. Will using the Edit XML option and removing it from that VM work? If it does work will anyone see any issues I may run into? And if that will not work what other options do I have?

Perfect.

This may sound like a funny question but how do I know if my thumb drive which has the unRAID OS on it is starting to fail? I am getting this errors in my syslog and seeing as the only usb device I have plugged in is the OS I assume there is an issue. tower-syslog-20170823-2252.zip

I am having problems connecting couchpot. to deluge and want to open the auth file in deluge but for some reason it just comes up saying "You do not have permission to open the file". Could it be because I left the umask at default 000?

Done. supervisord.log

Been a while since I had to set up DelugeVPN as up till now it just worked. But short story I have a few errors that puzzle me. Is this something I should be concerned about and if so is there a fix?

Yea array was started. Has been for 3 odd days now, no rush I still need to get a dual NIC before I need the autostart.

6.3.5 If you need any log's from me just give me a yell.

Are the errors anything to worry about? And I assume the time delay is in seconds?

Thanks very much for answering me so quickly. One last question on this plugin. Does the timer start from when you start the array or does the timer start once the array has started? Odd question I know but Im going to be running up a pfsense VM and want my times to be right.

I have one question in regards this plugin. When you move a docker app over to be delayed it has an IP but has NA in the port section. Does that mean I have to give it the correct port or will it use the default ports?

Hi, Im having some problems getting the app to run and wouldnt mind some help. I have Apache installed and working with no problems. When I try and start Proftpd it keeps coming back with an error on the bottom of the screen as seen in the pic. Any ideas what im doing wrong? Hoping its a easy fix as im not overly smart when it comes to using telnet.

First up I like the app. Very easy to use. Just two questions. I the image supplied can I assume that the N/A highlighted with the first yellow box will be filled with the info from the other drives if I test all drives at once? And second question is what is the red box for highlighted with the second yellow box?

I have one. I live in Australia.