erodz1892

Members
  • Content Count

    7
  • Joined

  • Last visited

Posts posted by erodz1892

  1. Have dual parity drives, however one of them failed. All the drives are 3TB in size including the parity drives but when one failed I replaced it with a 5TB drive and that one failed too. My question is now I have dual parity mismatched one is 3tb and the other is 5tb can I downgrade that 5TB drive that failed back to a 3TB drive?. I know in raid system you can use different sizes of drives but you only going to get the smaller capacity of the drives and since the other parity drive is 3TB I may be assuming that the 5TB is only using 3TB capacity. Thanks in advanced 

  2. On 3/4/2018 at 6:34 PM, dacmcbibs said:

    I'm looking for a little help with Intel IGD pass-through.  Every time i try to enable pass-through the VM refuses to boot and i find the following error in the logs:

     

    2018-03-04T15:30:19.849395Z qemu-system-x86_64: -device vfio-pci,host=00:02.0,id=hostdev0,bus=pci.0,addr=0x2: Failed to mmap 0000:00:02.0 BAR 2. Performance may be slow
    I have tried the following:

    • Set VNC as the default graphics card.   when trying to connect it tells me that the guest has not initialized the display (yet) 
    • Turning the Hyper-V setting on and off
    • Different combinations of Bios and machine (mostly SeaBIOS and i440fx 2.10)
    • Setting the primary GPU in the bios (to every option available)
    • Turning  Enable PCIe ACS Override on and off 
    • Tried using RDP to get to the machine after booting

    In every case i received the same warning, and cannot get any video from the VM as long as the Intel IGD is enabled, if i go VNC only everything works as expected.  All other devices pass-through with no issue (audio, keyboard, mouse, etc) 

     

    Any advice would be greatly appreciated. Below are my system info , VM configuration , IOMMU groups , and my syslinux configuration.  

    Let me know if any additional information is needed to help diagnose the root cause of this issue.

     

    Thank you in advance.  

     

    System info:

    Model: Custom
    M/B: ASUSTeK COMPUTER INC. - PRIME Z370-A
    CPU: Intel® Core™ i7-8700K CPU @ 3.70GHz
    HVM: Enabled
    IOMMU: Enabled
     
     
    VM configuration 
    <domain type='kvm'>
      <name>Windows 10</name>
      <uuid>7898cba2-7684-822d-6eac-a7e0e6220cc6</uuid>
      <metadata>
        <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/>
      </metadata>
      <memory unit='KiB'>4194304</memory>
      <currentMemory unit='KiB'>4194304</currentMemory>
      <memoryBacking>
        <nosharepages/>
      </memoryBacking>
      <vcpu placement='static'>4</vcpu>
      <cputune>
        <vcpupin vcpu='0' cpuset='2'/>
        <vcpupin vcpu='1' cpuset='8'/>
        <vcpupin vcpu='2' cpuset='3'/>
        <vcpupin vcpu='3' cpuset='9'/>
      </cputune>
      <os>
        <type arch='x86_64' machine='pc-i440fx-2.10'>hvm</type>
      </os>
      <features>
        <acpi/>
        <apic/>
      </features>
      <cpu mode='host-passthrough' check='none'>
        <topology sockets='1' cores='2' threads='2'/>
      </cpu>
      <clock offset='localtime'>
        <timer name='rtc' tickpolicy='catchup'/>
        <timer name='pit' tickpolicy='delay'/>
        <timer name='hpet' present='no'/>
      </clock>
      <on_poweroff>destroy</on_poweroff>
      <on_reboot>restart</on_reboot>
      <on_crash>restart</on_crash>
      <devices>
        <emulator>/usr/local/sbin/qemu</emulator>
        <disk type='file' device='disk'>
          <driver name='qemu' type='raw' cache='writeback'/>
          <source file='/mnt/user/domains/Windows 10/vdisk1.img'/>
          <target dev='hdc' bus='virtio'/>
          <boot order='1'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
        </disk>
        <disk type='file' device='cdrom'>
          <driver name='qemu' type='raw'/>
          <source file='/mnt/user/isos/Win10_1709_English_x64.iso'/>
          <target dev='hda' bus='ide'/>
          <readonly/>
          <boot order='2'/>
          <address type='drive' controller='0' bus='0' target='0' unit='0'/>
        </disk>
        <disk type='file' device='cdrom'>
          <driver name='qemu' type='raw'/>
          <source file='/mnt/user/isos/virtio-win-0.1.141-1.iso'/>
          <target dev='hdb' bus='ide'/>
          <readonly/>
          <address type='drive' controller='0' bus='0' target='0' unit='1'/>
        </disk>
        <controller type='usb' index='0' model='ich9-ehci1'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
        </controller>
        <controller type='usb' index='0' model='ich9-uhci1'>
          <master startport='0'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
        </controller>
        <controller type='usb' index='0' model='ich9-uhci2'>
          <master startport='2'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
        </controller>
        <controller type='usb' index='0' model='ich9-uhci3'>
          <master startport='4'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
        </controller>
        <controller type='pci' index='0' model='pci-root'/>
        <controller type='ide' index='0'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
        </controller>
        <controller type='virtio-serial' index='0'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
        </controller>
        <interface type='bridge'>
          <mac address='52:54:00:63:52:6b'/>
          <source bridge='br0'/>
          <model type='virtio'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
        </interface>
        <serial type='pty'>
          <target port='0'/>
        </serial>
        <console type='pty'>
          <target type='serial' port='0'/>
        </console>
        <channel type='unix'>
          <target type='virtio' name='org.qemu.guest_agent.0'/>
          <address type='virtio-serial' controller='0' bus='0' port='1'/>
        </channel>
        <input type='tablet' bus='usb'>
          <address type='usb' bus='0' port='1'/>
        </input>
        <input type='mouse' bus='ps2'/>
        <input type='keyboard' bus='ps2'/>
        <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'>
          <listen type='address' address='0.0.0.0'/>
        </graphics>
        <video>
          <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
        </video>
        <hostdev mode='subsystem' type='pci' managed='yes'>
          <driver name='vfio'/>
          <source>
            <address domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
          </source>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
        </hostdev>
        <hostdev mode='subsystem' type='pci' managed='yes'>
          <driver name='vfio'/>
          <source>
            <address domain='0x0000' bus='0x00' slot='0x1f' function='0x3'/>
          </source>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
        </hostdev>
        <memballoon model='virtio'>
          <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
        </memballoon>
      </devices>
    </domain>
     

    PCI Devices and IOMMU Groups

    
    
     
    IOMMU group 0: [8086:3ec2] 00:00.0 Host bridge: Intel Corporation Device 3ec2 (rev 07)
     
    IOMMU group 1: [8086:3e92] 00:02.0 VGA compatible controller: Intel Corporation Device 3e92
     
    IOMMU group 2: [8086:a2af] 00:14.0 USB controller: Intel Corporation 200 Series PCH USB 3.0 xHCI Controller
     
    IOMMU group 3: [8086:a2ba] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
     
    IOMMU group 4: [8086:a282] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
     
    IOMMU group 5: [8086:a2e7] 00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #17 (rev f0)
     
    IOMMU group 6: [8086:a290] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #1 (rev f0)
     
    IOMMU group 7: [8086:a294] 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
     
    IOMMU group 8: [8086:a298] 00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
     
    IOMMU group 9: [8086:a2c9] 00:1f.0 ISA bridge: Intel Corporation Device a2c9
      [8086:a2a1] 00:1f.2 Memory controller: Intel Corporation 200 Series PCH PMC
      [8086:a2f0] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
      [8086:a2a3] 00:1f.4 SMBus: Intel Corporation 200 Series PCH SMBus Controller
     
    IOMMU group 10: [8086:15b8] 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
     
    IOMMU group 11: [144d:a804] 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
     
    IOMMU group 12: [1b21:2142] 03:00.0 USB controller: ASMedia Technology Inc. Device 2142
     
    IOMMU group 13: [144d:a804] 04:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961

     

     

    Syslinux configuration:

    default menu.c32
    menu title Lime Technology, Inc.
    prompt 0
    timeout 50
    label unRAID OS
      menu default
      kernel /bzimage
      append vfio-pci.ids=8086:a2f0 modprobe.blacklist=i2c_i801,i2c_smbus intel_pstate=disable initrd=/bzroot
    label unRAID OS GUI Mode
      kernel /bzimage
      append initrd=/bzroot,/bzroot-gui
    label unRAID OS Safe Mode (no plugins, no GUI)
      kernel /bzimage
      append initrd=/bzroot unraidsafemode
    label unRAID OS GUI Safe Mode (no plugins)
      kernel /bzimage
      append initrd=/bzroot,/bzroot-gui unraidsafemode
    label Memtest86+
      kernel /memtest

     

      

    I believe pass through only applies to Nvidia gpu only if im not mistaken. Some has tried but i think is haswell and broadwell CPUs only. 

  3. 3 hours ago, 1812 said:

    buy a 19 dollar mellanox connect-x 10gbe off ebay. check the approved hardware list for other possibilities.

    those dont use RJ45 id say most of unraid users use RJ45 trying to avoid those strange non consumer friendly adapters 

  4. Got it figure it out, now this is interesting because it was on one thread (cant remember witch one) but you have to modify the network for the docker tab to appear. I set the DNS to google public and some other changes and then I was good to go but no instructions were available on this so it can be very frustrating at first. Thanks and if anyone needs some info ill be glad to help.

  5. Sorry for jumping in  here I honestly don't know where to post  as a brand new user unraid 6. I'm really impressed with it and very happy so far the set up has been a breeze. However installing the plug ins have been somewhat confusing as all I have seen is outdated information and there's seem to be different ways of installing a plug in. This could be the replacement of having my pc on 24\7 if anyone can point me to a guide or guide me on how to install the plex plugin on my new installation. Seems there's no easy Ala freenas click to install plug in and the url doesn't really work comes with some errors, again sorry for posting this as I am really thrilled with unraid and would like to find this. Many thanks in advance!