Trylo

Members
  • Posts

    122
  • Joined

  • Last visited

Everything posted by Trylo

  1. The recent update broke my OnlyOfficeDS. When I try to go to the URL office.mydomain.com I'm getting: 502 Bad Gateway openresty I'm using Nginx Proxy Manager and NextCloud. I noticed that NextCloud informed me that OnlyOfficedS is not available and to check the configuration. The configuration is correct. After clicking save I'm getting: Error when trying to connect (Server error: `GET https://office.mydomain.com/healthcheck` resulted in a `502 Bad Gateway` response: 502 Bad Gateway 502 Bad Gateway open (truncated...) ) I've attached log and nginx error log. Can anyone have a look and help me troubleshoot this? log.txt nginx.error.log
  2. Any plans to enable nvidia GPUs?
  3. Hi! I've got 2 new drives of higher capacity. One to replace the parity drive and one to get some more storage (Seagate Exos X16 ST16000NM001G). Both drives have been put in HDD enclosure that takes 3 drives and it's mounted in 2 5.25" bays. I've always noticed that the drives I had there were running a bit hotter than other drives, but never exceeded 45°C. Also these drives were connected to LSI SAS2008. I've noticed that after maybe 15 minutes pre-read speed dropped from 280MB/s to 66MB/s. I left it for a bit, thinking that it will go back, but after 5h I came back and both were still at around 66MB/s and at 47°C and 49°C! I've stopped the pre-clear and changed the location of the drives. With the location I also changed SATA cables and now those 2 drives are connected via motherboard ports. It's been 1.5h and the speed is around 275MB/s and temp. 38°C. Is this normal that drives slow down when they get hot? Also I read that some people put small fans on the radiator of the LSI SAS2008. I don't have one and it was very hot to touch. Could the LSI SAS2008 also slow down because of high temperature? I've ordered a small 40mm fan for it already. So bottom line is: everything is fine now, but with time as I replace my 2-4TB drives with 16TB drives I want to avoid any mistakes. Any input is welcome! Thank you in advance!
  4. I've updated container today and it looks like Region and Country selection for AirVPN is broken. Gluetun is expecting Upper case first letter, but even if I enter Upper case first letter it somplains that it's a Lower case first letter. So. in configuration I'm entering "Netherlands", but then in log it complains, that "netherlands" is not a valid option and it should be "Netherlands". Same with Europe.
  5. I'm trying to set up OnlyOffice container to work with Nextcloud. I'm using Nginx Proxy Manager. The subdomain is reachable from the internet, but when I enter the address and the secret key I'm getting error: "Error when trying to connect (Error occurred in the document service: Error while downloading the document file to be converted.) (version 7.3.3.49)" Any ideas how to troubleshoot it?
  6. I found this in the documentation (https://networkupstools.org/docs/man/usbhid-ups.html😞 " device = regex Select a UPS on a specific USB device or group of devices. The argument is a regular expression that must match the device name where the UPS is connected (e.g. device="001" or device="00[1-2]") as seen in /proc/bus/usb/devices or lsusb(8); including leading zeroes. Note that device numbers are not guaranteed by the OS to be stable across re-boots or device re-plugging. " My device is: Bus 005 Device 038 Port 5-1 ID 051d:0002 American Power Conversion Uninterruptible Power Supply So I added device="038" to /etc/nut/ups.conf in Config Editor But upon reloading I got this: "Duplicate driver instance detected (PID file /var/run/nut/usbhid-ups-ups.pid exists)! Terminating other driver!" And NUT then reverts back ups.conf to the previous state.
  7. @SimonF so are you saying there is no way to set it up using the plugin?
  8. Good thinking. I'd say it's unlikely. If the PC or Mac is underload for sure not, but if both are ideal it may be close... In this case a RaspberryPi would be safer...
  9. It's a good idea, but wouldn't a lightweight Linux VM make more sense and pass through the USB with the 2nd UPS? I guess this can be my plan B, I'd rather use the NUT plugin.
  10. I have a UPS that I've been using for 6 years, it was handling Unraid machine, Windows PC and a Mac. I've upgraded GPU on my PC machine and the UPS is no longer sufficient, so I bought a bigger one. Now having 2 I'd like first one to handle Unraid and the second one to handle the other 2 computers. Both UPSes and Unraid machine are in one room and the PC and Mac are in the office. I have a power line running from one room to another (I've had it installed while renovating so that I don't have to have annoying UPS sound in the office). Now the question is how to get my main PC shut down in case of power failure. So far I was using the Unraid builtin capabilities to communicate with UPS, but now having 2 I thought that the 2nd one can be connected to the NUT plugin, but when I start NUT it always connects to the first one. How can I select which UPS NUT will connect to? Here is output after clicking "Autodetect": [nutdev1] driver = "usbhid-ups" port = "auto" vendorid = "051D" productid = "0002" product = "Back-UPS XS 1400U FW:926.T1 .I USB FW:T1" serial = "3B1451X16024" vendor = "American Power Conversion" bus = "005" [nutdev2] driver = "usbhid-ups" port = "auto" vendorid = "051D" productid = "0002" product = "Back-UPS BX2200MI FW:378700G -302202G" serial = "9B2221A44604" vendor = "American Power Conversion" bus = "005"
  11. I'm having a problem. I can't get Windows 11 to connect to the USBIP on my Unraid. I'm trying to connect device 5-1. On Unraid side everything looks good: On Windows side I followed this guide: https://sourceforge.net/p/usbip/git-windows/ci/master/tree/trunk/driver/USAGE but I'm getting errors: C:\Users\andrz\Downloads>usbip -l 192.168.2.5 - 192.168.2.5 usbip err: usbip_network.c: 121 (usbip_recv_op_common) recv op_common, -1 usbip err: usbip.c: 216 (query_exported_devices) recv op_common usbip err: usbip.c: 288 (show_exported_devices) query Am I doing something wrong?
  12. Wow! The test probably failed between me starting it and exporting the diagnostics. Thank you for quick help.
  13. Hi! This morning I woke up to a message "array has 1 disk with read errors" Disk 5 had 1850 erorrs. I did open the case yesterday, I didn't touch drives, but I shut the machine down and made sure that all sata cables are sitting in properly. Booted up unraid and started parity check, quickly I got the same message again. I'm posting here the diagnostics. I've also started extended SMART self-test, but as it take ages - maybe someone can tell me based on diagonstics if I should just order a new drive. Thank you! nas-diagnostics-20230322-1110.zip
  14. I've got it 5 minutes after I posted it Thank you for the quick reply!
  15. I've checked. The CPU Fan is PWM and bios is set to PWM.
  16. I'm not sure if there is connection, but I've just turned on my Windows VM and the RPM dorpped. root@NAS:~# sensors asus_wmi_sensors-virtual-0 Adapter: Virtual device CPU Core Voltage: 1.08 V +12V Voltage: 11.84 V +5V Voltage: 4.88 V 3VSB Voltage: 3.33 V Array Fan: 886 RPM CPU Temperature: +59.0°C Motherboard Temperature: +35.0°C k10temp-pci-00c3 Adapter: PCI adapter CPU Temp: +59.6°C asusec-isa-0000 Adapter: ISA adapter CPU Core: 1.09 V Chipset: +52.0°C CPU: +59.0°C MB Temp: +35.0°C T_Sensor: -40.0°C VRM: +21.0°C CPU: 23.00 A
  17. The fan is correctly plugged. Here is the sensors print (now the temp is lower, yet the rpm is higher): root@NAS:~# sensors asus_wmi_sensors-virtual-0 Adapter: Virtual device CPU Core Voltage: 1.10 V +12V Voltage: 11.84 V +5V Voltage: 4.88 V 3VSB Voltage: 3.33 V Array Fan: 1271 RPM CPU Temperature: +55.0°C Motherboard Temperature: +35.0°C k10temp-pci-00c3 Adapter: PCI adapter CPU Temp: +55.0°C asusec-isa-0000 Adapter: ISA adapter CPU Core: 1.09 V Chipset: +51.0°C CPU: +55.0°C MB Temp: +35.0°C T_Sensor: -40.0°C VRM: +21.0°C CPU: 24.00 A
  18. Hi! For some time now I noticed that my CPU fan is running quite low. It's not a constant thing, sometimes it ramps up as it should, other times just ignores the CPU temp. Right nowmy CPU is at 74C and the fan should be around 2800rpm at this temperature, yet it's just sitting at 900rpm... I checked BIOS and made sure the fan curve is correct. Any ideas how to troubleshoot it?
  19. Hi! Since yesterday I've got twice error 500. After logging in the website shows "500 SERVER ERROR" Log: text error warn system array login #18 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(59): Livewire\\LivewireViewCompilerEngine->evaluatePath() #19 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(152): Livewire\\LivewireViewCompilerEngine->get() #20 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(135): Illuminate\\View\\View->getContents() #21 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(104): Illuminate\\View\\View->renderContents() #22 /var/www/html/vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesComponents.php(104): Illuminate\\View\\View->render() #23 /var/www/html/storage/framework/views/acd3b491c3d37029513433f7a64aed073c3aef6b.php(71): Illuminate\\View\\Factory->renderComponent() #24 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(83): include('...') #25 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(84): App\\Filament\\Pages\\Dashboard->Livewire\\ComponentConcerns\\{closure}() #26 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(59): Livewire\\LivewireViewCompilerEngine->evaluatePath() #27 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(152): Livewire\\LivewireViewCompilerEngine->get() #28 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(135): Illuminate\\View\\View->getContents() #29 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(104): Illuminate\\View\\View->renderContents() #30 /var/www/html/vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesComponents.php(104): Illuminate\\View\\View->render() #31 /var/www/html/storage/framework/views/cc5eee9e815a5a4140a61d9baed31d1f0f26f07d.php(15): Illuminate\\View\\Factory->renderComponent() #32 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(83): include('...') #33 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(84): App\\Filament\\Pages\\Dashboard->Livewire\\ComponentConcerns\\{closure}() #34 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(59): Livewire\\LivewireViewCompilerEngine->evaluatePath() #35 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(152): Livewire\\LivewireViewCompilerEngine->get() #36 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(135): Illuminate\\View\\View->getContents() #37 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(104): Illuminate\\View\\View->renderContents() #38 /var/www/html/vendor/livewire/livewire/src/Component.php(235): Illuminate\\View\\View->render() #39 /var/www/html/vendor/livewire/livewire/src/HydrationMiddleware/RenderView.php(14): Livewire\\Component->output() #40 /var/www/html/vendor/livewire/livewire/src/LifecycleManager.php(141): Livewire\\HydrationMiddleware\\RenderView::dehydrate() #41 /var/www/html/storage/framework/views/c8f8a1ccea72b20d02dd0f3a5949fed047a1dee9.php(3): Livewire\\LifecycleManager->initialDehydrate() #42 /var/www/html/vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php(109): require('...') #43 /var/www/html/vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php(110): Illuminate\\Filesystem\\Filesystem::Illuminate\\Filesystem\\{closure}() #44 /var/www/html/vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php(58): Illuminate\\Filesystem\\Filesystem->getRequire() #45 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(69): Illuminate\\View\\Engines\\PhpEngine->evaluatePath() #46 /var/www/html/vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php(70): Livewire\\LivewireViewCompilerEngine->evaluatePath() #47 /var/www/html/vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php(35): Illuminate\\View\\Engines\\CompilerEngine->get() #48 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(152): Livewire\\LivewireViewCompilerEngine->get() #49 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(135): Illuminate\\View\\View->getContents() #50 /var/www/html/vendor/laravel/framework/src/Illuminate/View/View.php(104): Illuminate\\View\\View->renderContents() #51 /var/www/html/vendor/laravel/framework/src/Illuminate/Http/Response.php(69): Illuminate\\View\\View->render() #52 /var/www/html/vendor/laravel/framework/src/Illuminate/Http/Response.php(35): Illuminate\\Http\\Response->setContent() #53 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(906): Illuminate\\Http\\Response->__construct() #54 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(875): Illuminate\\Routing\\Router::toResponse() #55 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(798): Illuminate\\Routing\\Router->prepareResponse() #56 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(141): Illuminate\\Routing\\Router->Illuminate\\Routing\\{closure}() #57 /var/www/html/vendor/filament/filament/src/Http/Middleware/MirrorConfigToSubpackages.php(30): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #58 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Filament\\Http\\Middleware\\MirrorConfigToSubpackages->handle() #59 /var/www/html/vendor/filament/filament/src/Http/Middleware/DispatchServingFilamentEvent.php(15): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #60 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Filament\\Http\\Middleware\\DispatchServingFilamentEvent->handle() #61 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php(50): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #62 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Routing\\Middleware\\SubstituteBindings->handle() #63 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php(78): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #64 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Foundation\\Http\\Middleware\\VerifyCsrfToken->handle() #65 /var/www/html/vendor/laravel/framework/src/Illuminate/Session/Middleware/AuthenticateSession.php(59): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #66 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Session\\Middleware\\AuthenticateSession->handle() #67 /var/www/html/vendor/laravel/framework/src/Illuminate/Auth/Middleware/Authenticate.php(44): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #68 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Auth\\Middleware\\Authenticate->handle() #69 /var/www/html/vendor/laravel/framework/src/Illuminate/View/Middleware/ShareErrorsFromSession.php(49): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #70 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\View\\Middleware\\ShareErrorsFromSession->handle() #71 /var/www/html/vendor/laravel/framework/src/Illuminate/Session/Middleware/StartSession.php(121): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #72 /var/www/html/vendor/laravel/framework/src/Illuminate/Session/Middleware/StartSession.php(64): Illuminate\\Session\\Middleware\\StartSession->handleStatefulRequest() #73 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Session\\Middleware\\StartSession->handle() #74 /var/www/html/vendor/laravel/framework/src/Illuminate/Cookie/Middleware/AddQueuedCookiesToResponse.php(37): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #75 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Cookie\\Middleware\\AddQueuedCookiesToResponse->handle() #76 /var/www/html/vendor/laravel/framework/src/Illuminate/Cookie/Middleware/EncryptCookies.php(67): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #77 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Cookie\\Middleware\\EncryptCookies->handle() #78 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(116): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #79 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(799): Illuminate\\Pipeline\\Pipeline->then() #80 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(776): Illuminate\\Routing\\Router->runRouteWithinStack() #81 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(740): Illuminate\\Routing\\Router->runRoute() #82 /var/www/html/vendor/laravel/framework/src/Illuminate/Routing/Router.php(729): Illuminate\\Routing\\Router->dispatchToRoute() #83 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Kernel.php(190): Illuminate\\Routing\\Router->dispatch() #84 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(141): Illuminate\\Foundation\\Http\\Kernel->Illuminate\\Foundation\\Http\\{closure}() #85 /var/www/html/vendor/livewire/livewire/src/DisableBrowserCache.php(19): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #86 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Livewire\\DisableBrowserCache->handle() #87 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/TransformsRequest.php(21): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #88 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/ConvertEmptyStringsToNull.php(31): Illuminate\\Foundation\\Http\\Middleware\\TransformsRequest->handle() #89 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Foundation\\Http\\Middleware\\ConvertEmptyStringsToNull->handle() #90 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/TransformsRequest.php(21): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #91 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/TrimStrings.php(40): Illuminate\\Foundation\\Http\\Middleware\\TransformsRequest->handle() #92 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Foundation\\Http\\Middleware\\TrimStrings->handle() #93 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/ValidatePostSize.php(27): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #94 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Foundation\\Http\\Middleware\\ValidatePostSize->handle() #95 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/PreventRequestsDuringMaintenance.php(86): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #96 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Foundation\\Http\\Middleware\\PreventRequestsDuringMaintenance->handle() #97 /var/www/html/vendor/laravel/framework/src/Illuminate/Http/Middleware/HandleCors.php(49): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #98 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Http\\Middleware\\HandleCors->handle() #99 /var/www/html/vendor/laravel/framework/src/Illuminate/Http/Middleware/TrustProxies.php(39): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #100 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(180): Illuminate\\Http\\Middleware\\TrustProxies->handle() #101 /var/www/html/vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php(116): Illuminate\\Pipeline\\Pipeline->Illuminate\\Pipeline\\{closure}() #102 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Kernel.php(165): Illuminate\\Pipeline\\Pipeline->then() #103 /var/www/html/vendor/laravel/framework/src/Illuminate/Foundation/Http/Kernel.php(134): Illuminate\\Foundation\\Http\\Kernel->sendRequestThroughRouter() #104 /var/www/html/public/index.php(52): Illuminate\\Foundation\\Http\\Kernel->handle() #105 {main} "} 192.168.2.198 - - [21/Dec/2022:21:47:09 +0100] "GET /admin HTTP/2.0" 500 6609 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/108.0.0.0 Safari/537.36"
  20. Hi! Here is what happened. I had to change some threads in CPU Isolation so I had to reboot the system. After the reboot all containers and VMs were gone and cache drive was showing 0 bytes free. I don't know what was the state before reboot, but for sure it wasn't completely full. I started the mover, but after 15-20 minutes I saw there is no free space showing up, so I decided to click "reboot" it took a minute, but it rebooted. After that all containers and VMs started properly. The reboot must not have been clean as a parity check started. I was shocked to see there were 641 corrected errors. That was very weird, so I decdied to the another parity check the next day. Again! Exactly same amount of errors corrected. I thought that it's very weird so I decided to see what would happen if I reboot again. This time I ran the mover before and waited for it to finish. After reboot containers and VMs started, but I got read errors on disk 2. I ran SMART diagnostics and it came back fine. Only thing is that UDMA CRC error count is showing 52. It happened once before (don't remember if this drive) and I read that it might be a bad cable, so I just ordered new SAS to SATA cables. Any ideas what is going on? Thank you in advance! nas-diagnostics-20220613-1245.zip Disk Log Information.txt nas-smart-20220613-2348.zip
  21. I had Wireguard for a long time. I'm not tracking the versions. Currently I have 2021.06.02. Unraid: I'm still on 6.9.2
  22. My connection works well. I can access Unraid and other computers on the network. The only problem is that it is quite slow. Unraid is connected to fiber 1Gbps up and down. Right now I'm on a network that also has fiber. Wifi connection to my laptop is giving me 400Mbps down and 320Mbps up. Yet via WireGuard VPN I have an upload of 20Mbps. I changed my MTU to 1472, but that didn't help. Any ideas?
  23. I've been having a problem recently: my set didn't change at all, but CrashPlan is finding 1TB of data to upload each day. Support said, that they don't help with container environments and suggest that for my size (17TB) maybe I should look into other solutions. I guess I can make a VM just for CrashPlan, but I'd rather keep it in the docker. Anyone know how to troubleshoot this?
  24. Try deauthrizing. It often helps in this kind of situations. https://support.code42.com/Administrator/6/Monitoring_and_managing/Block_deauthorize_and_deactivate
  25. Hi! After a monthly Parity Check I've got a warning that there was 6 errors on my parity drive. Smart says it's fine: So I ran an extended test and here is the raport: WD Extended Smart report.txt Should I replace this drive?