coltonc18

Just wanted to post an update....the new motherboard and cpu corrected all errors.

ok, looking for a new motherboard and cpu now....trying to figure out what to upgrade/change to.

It was doing the rebuild again, and radarr was off...and this happened, so it stopped the rebuild, I can only assume the cpu is bad, no idea what else it could be. Oct 27 09:43:38 Plex kernel: ? __die_body+0x1a/0x5c Oct 27 09:43:38 Plex kernel: ? page_fault_oops+0x329/0x376 Oct 27 09:43:38 Plex kernel: ? do_user_addr_fault+0x12e/0x48d Oct 27 09:43:38 Plex kernel: ? exc_page_fault+0xfb/0x11d Oct 27 09:43:38 Plex kernel: ? asm_exc_page_fault+0x22/0x30 Oct 27 09:43:38 Plex kernel: ? release_stripe+0x9/0x37 [md_mod] Oct 27 09:43:38 Plex kernel: unraidd+0x10ce/0x1140 [md_mod] Oct 27 09:43:38 Plex kernel: ? md_thread+0xf4/0x122 [md_mod] Oct 27 09:43:38 Plex kernel: ? _raw_spin_rq_lock_irqsave+0x20/0x20 Oct 27 09:43:38 Plex kernel: ? signal_pending+0x1d/0x1d [md_mod] Oct 27 09:43:38 Plex kernel: ? kthread+0xe4/0xef Oct 27 09:43:38 Plex kernel: ? kthread_complete_and_exit+0x1b/0x1b Oct 27 09:43:38 Plex kernel: ? ret_from_fork+0x1f/0x30 Oct 27 09:43:38 Plex kernel: </TASK> Oct 27 09:43:38 Plex kernel: Modules linked in: tun udp_diag veth ipvlan xt_nat xt_tcpudp xt_conntrack nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype br_netfilter xfs nfsd auth_rpcgss oid_registry lockd grace sunrpc md_mod zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) tcp_diag inet_diag iptable_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha ip6table_filter ip6_tables iptable_filter ip_tables x_tables af_packet 8021q garp mrp bridge stp llc i915 intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp iosf_mbi drm_buddy i2c_algo_bit ttm coretemp drm_display_helper kvm_intel drm_kms_helper kvm drm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 aesni_intel crypto_simd cryptd mei_hdcp mei_pxp intel_gtt rapl nvme mei_me mpt3sas ahci agpgart i2c_i801 Oct 27 09:43:38 Plex kernel: intel_cstate i2c_smbus e1000e nvme_core mei libahci raid_class intel_uncore i2c_core syscopyarea sysfillrect video scsi_transport_sas sysimgblt fb_sys_fops wmi backlight acpi_pad intel_pmc_core button unix Oct 27 09:43:38 Plex kernel: CR2: 0000000e8187aca5 Oct 27 09:43:38 Plex kernel: ---[ end trace 0000000000000000 ]--- Oct 27 09:43:38 Plex kernel: RIP: 0010:release_stripe+0x9/0x37 [md_mod] Oct 27 09:43:38 Plex kernel: Code: e0 83 3d f0 75 00 00 03 7e 11 48 8b 73 30 48 c7 c7 c4 4e 82 a0 5b e9 9d a8 03 e1 5b c3 cc cc cc cc 0f 1f 44 00 00 41 54 55 53 <4c> 8b 67 20 48 89 fb 49 8d ac 24 70 05 00 00 48 89 ef e8 67 9d 05 Oct 27 09:43:38 Plex kernel: RSP: 0018:ffffc90003927dd8 EFLAGS: 00010297 Oct 27 09:43:38 Plex kernel: RAX: 0000000000000000 RBX: ffff88816b6cbd18 RCX: ffff88816a6d0000 Oct 27 09:43:38 Plex kernel: RDX: 0000000000000000 RSI: ffffffff82105ea7 RDI: 0000000e8187ac85 Oct 27 09:43:38 Plex kernel: RBP: 0000000000000001 R08: ffff88816a6d0000 R09: 0000000000001000 Oct 27 09:43:38 Plex kernel: R10: ffff88816a6d0000 R11: 0000000000000000 R12: ffff88810239b910 Oct 27 09:43:38 Plex kernel: R13: ffff88816b6cbe70 R14: ffff88816b6cbf98 R15: ffff888140a11218 Oct 27 09:43:38 Plex kernel: FS: 0000000000000000(0000) GS:ffff88902f000000(0000) knlGS:0000000000000000 Oct 27 09:43:38 Plex kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 27 09:43:38 Plex kernel: CR2: 0000000e8187aca5 CR3: 000000000220a003 CR4: 00000000003706f0 Oct 27 09:43:38 Plex kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Oct 27 09:43:38 Plex kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Oct 27 09:43:38 Plex kernel: note: unraidd0[7790] exited with irqs disabled Oct 27 09:43:38 Plex kernel: ------------[ cut here ]------------ Oct 27 09:43:38 Plex kernel: WARNING: CPU: 0 PID: 7790 at kernel/exit.c:814 do_exit+0x87/0x923 Oct 27 09:43:38 Plex kernel: Modules linked in: tun udp_diag veth ipvlan xt_nat xt_tcpudp xt_conntrack nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype br_netfilter xfs nfsd auth_rpcgss oid_registry lockd grace sunrpc md_mod zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) tcp_diag inet_diag iptable_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha ip6table_filter ip6_tables iptable_filter ip_tables x_tables af_packet 8021q garp mrp bridge stp llc i915 intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp iosf_mbi drm_buddy i2c_algo_bit ttm coretemp drm_display_helper kvm_intel drm_kms_helper kvm drm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 aesni_intel crypto_simd cryptd mei_hdcp mei_pxp intel_gtt rapl nvme mei_me mpt3sas ahci agpgart i2c_i801 Oct 27 09:43:38 Plex kernel: intel_cstate i2c_smbus e1000e nvme_core mei libahci raid_class intel_uncore i2c_core syscopyarea sysfillrect video scsi_transport_sas sysimgblt fb_sys_fops wmi backlight acpi_pad intel_pmc_core button unix Oct 27 09:43:38 Plex kernel: CPU: 0 PID: 7790 Comm: unraidd0 Tainted: P D O 6.1.38-Unraid #2 Oct 27 09:43:38 Plex kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B365M Pro4, BIOS P4.40 05/29/2020 Oct 27 09:43:38 Plex kernel: RIP: 0010:do_exit+0x87/0x923 Oct 27 09:43:38 Plex kernel: Code: 24 74 04 75 13 b8 01 00 00 00 41 89 6c 24 60 48 c1 e0 22 49 89 44 24 70 4c 89 ef e8 41 93 80 00 48 83 bb b0 07 00 00 00 74 02 <0f> 0b 48 8b bb d8 06 00 00 e8 43 92 80 00 48 8b 83 d0 06 00 00 83 Oct 27 09:43:38 Plex kernel: RSP: 0018:ffffc90003927ee0 EFLAGS: 00010286 Oct 27 09:43:38 Plex kernel: RAX: 0000000080000000 RBX: ffff8881074c2080 RCX: 0000000000000000 Oct 27 09:43:38 Plex kernel: RDX: 0000000000000001 RSI: 0000000000002710 RDI: 00000000ffffffff Oct 27 09:43:38 Plex kernel: RBP: 0000000000000009 R08: 0000000000000000 R09: ffffffff82245ed0 Oct 27 09:43:38 Plex kernel: R10: 00007fffffffffff R11: ffffffff829655cd R12: ffff888166bac400 Oct 27 09:43:38 Plex kernel: R13: ffff888152258840 R14: 0000000000000000 R15: 0000000000000000 Oct 27 09:43:38 Plex kernel: FS: 0000000000000000(0000) GS:ffff88902f000000(0000) knlGS:0000000000000000 Oct 27 09:43:38 Plex kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 27 09:43:38 Plex kernel: CR2: 0000000e8187aca5 CR3: 000000000220a003 CR4: 00000000003706f0 Oct 27 09:43:38 Plex kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Oct 27 09:43:38 Plex kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Oct 27 09:43:38 Plex kernel: Call Trace: Oct 27 09:43:38 Plex kernel: <TASK> Oct 27 09:43:38 Plex kernel: ? __warn+0xab/0x122 Oct 27 09:43:38 Plex kernel: ? report_bug+0x109/0x17e Oct 27 09:43:38 Plex kernel: ? do_exit+0x87/0x923 Oct 27 09:43:38 Plex kernel: ? handle_bug+0x41/0x6f Oct 27 09:43:38 Plex kernel: ? exc_invalid_op+0x13/0x60 Oct 27 09:43:38 Plex kernel: ? asm_exc_invalid_op+0x16/0x20 Oct 27 09:43:38 Plex kernel: ? do_exit+0x87/0x923 Oct 27 09:43:38 Plex kernel: make_task_dead+0x11c/0x11c Oct 27 09:43:38 Plex kernel: rewind_stack_and_make_dead+0x17/0x17 Oct 27 09:43:38 Plex kernel: RIP: 0000:0x0 Oct 27 09:43:38 Plex kernel: Code: Unable to access opcode bytes at 0xffffffffffffffd6. Oct 27 09:43:38 Plex kernel: RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 Oct 27 09:43:38 Plex kernel: RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 Oct 27 09:43:38 Plex kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 Oct 27 09:43:38 Plex kernel: RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 Oct 27 09:43:38 Plex kernel: R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 Oct 27 09:43:38 Plex kernel: R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Oct 27 09:43:38 Plex kernel: </TASK>

So, I've replaced the power supply on this, the ram, and the HBA now. Am I down to just needing to replace the CPU and motherboard now too? They are both only like 2 years old I think.

Well it was running when I went to bed last night, (with Radarr turned off) and was at 15% but the server rebooted at like 2 am for some reason so I'm back to starting it again. Looking at the logs it looks like it installed some stuff right before the restart. Is that what caused the restart? Or did I miss something? How do I stop that? Here is the syslog syslog-192.168.1.9.log

I don't get it, this seems to be an issue with Radarr, I've had this issue before. But I've completely removed radarr, and deleted the appdata folder. Then rebuilt it, this was like a week ago. After memtest came back ok, I restarted unraid and started up rebuild, but I turned off the container for radarr. I'm at 9.5%, farthest so far, and it's still going right now.

Well stopped it after it passed 2 tests with 0 errors.

It's done one pass with no problems, its 75% through the 2nd one without any issues....I'll prob let it finish it before I stop it.

ok, running memtest now

Well looking at the Segfault errors, they state its for Radarr, which is a concern, but my main issue right now is it slowing down majorly on trying to do a data rebuild. It doesnt do anything anymore.

Hello, I've been having some issues with my system for a bit I was having random restarts and having other issues. Changed out my memory and it didn't help the issue. Just changed out the HBA for the server and for some reason one of the disks was missing, and when I went to put it back in it says it needed to rebuild. No big deal, started the rebuild, and it stops/slows way down after a few percent. Looking at the logs, it looks like segfaults are happening, and its referring to the CPU. I haven't seen segfaults on CPU. Would someone mind looking at this, is my CPU bad? Thanks! plex-diagnostics-20231026-1037.zip

Sorry to say, it looks like that did not correct my error. Or if it did, I have multiple errors. I also did a memory test, and changed out the Psu yesterday. It just happened twice in the last hour or so while watching a show on it. Here is the most recent log. I will also note, something strange is also happening. Sometimes when it reboots, all drives show as missing except for like 3 of them. It requires a full reboot to fix that. I've been trying to read these logs right after this happens and I don't see anything, so I'm not sure where to start with this. Thanks for your assistance here. -Chase syslog-192.168.1.9.log

Thanks for this, I ended up changing that container over to this. We'll see if this helps-- binhex/arch-delugevpn:libtorrentv1

I came in this morning, and noticed it was in that state, not sure exactly when it happened overnight....but here are the logs that have been storing on the other server. Thanks syslog-192.168.1.9.log

ok, got it now....its generating logs, i'll report back once I get another freeze. Thanks for the help.

or do I need it on for "local syslog server" on the machine im trying to get the data from as well?

This is the machine I am trying to get to record the data....I had it setup completely different before, but after reading around...I think this is right now?

I think I had this all setup wrong the whole time...Is this how I need to set this up? The first pic is the machine I am trying to get the data from.

Ok, sorry back again. The server just did the hang up where it doesn't restart, but is just unreachable. Here is the diagnostics. I'm not sure if I need something else to access the syslog server data. Thanks! plex-diagnostics-20231008-1318.zip

Yeah, this time it did reboot, just wasn't sure if they were related or not. Does anything in my stuff show what the hardware problem might have been?

This might be related to the same issue, it might not. But the server just randomly rebooted and started a parity check. I have syslog server enabled. Do I still just pull a diagnostics, and it knows where it get the data from the syslog server, or how does that work? Here is the diagnostics if so. plex-diagnostics-20231006-1004.zip

Thanks, I have enabled it and set it to remote to my 2nd unraid server.

Hello, I'm trying to figure out this issue, it's been happening a couple times over the last week. Randomly I will go to do something on the server, and its not reachable anymore, like the server IP just times out. I can't access any of my dockers anymore either. The server itself is still on, but I just can't reach it. This seems to be happening more frequently and am not sure what I need to do to address it. I have attached my diagnostics with the hopes that something shows there as to what is causing it to occur. Thanks plex-diagnostics-20230928-0931.zip

Nvm, figured out how to keep it up and running.....how but how do you know if it's running correctly, since the log doesnt stay open on it...Guess just wait and see if plex crashes, or more like doesn't crash again.....

Ohhhh thank you for this....my Plex has been crashing and I couldn't figure out why. It would just randomly crash and I'd have to restart it. Kept thinking my DB was bad, but it was showing good. Found this thread, and now plugin and now it actually shows what you should be vs what you have, mine was half what was needed. Hopefully this change takes care of my issue!!