ratosaude

Just did and it worked perfectly, thank you!

This goes back to my initial post, after I edit this .ini and run the server, it creates a ghost directory with new files running standard and ignore every other file I edited.

Can't really give a link, since it's bits of information here and there, but it's quite simple. There's two lines inside server.ini that you need to fill that's modId and workshopItems. Usually they provide both in the steam workshop page of each mod, if it doesn't the workshopItem is in the address bar of the mod and the modId you would need to download in steam workshop than go to your steam instalation folder>steamapps>workshop>content>108600(PZ steam id)>mods and find the mod.info file which contains the modId. And inside the .ini you separate them with a ";" for each mod you want. There's 4 mods I want installed: hydrocraft, zombie loot extended, orgm and show damage.

It creates a new directory, that first one with new server files and run from that, ignoring the Zomboid folder and files in there. I can edit the file however it doesn't load the mods even after restarting the server.

I'm having some trouble with the Project Zomboid docker, when it creates the server, he's building a blank template server.ini file, ignoring the server.ini I had editted and thus not implemeting the mods in-game. Any idea what it could be?

I created a new user on the Users tab and tried to login on the webgui with it but it gets me an invalid error, how would I fix that? I’m using unraid 6.8.2

Edit VM XML , and add the entire controller , something like this: <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x00' slot='0x1d' function='0x0'/> </source> </hostdev>

Have you figured a way to make this work? I don't know how to split each output for different VM's. I use it only for one VM.

I have the same problem with my GTX 550 ti, I think it must be the board technology that does not accept this function.

Running on VGA I managed to create a ROM, however when I shutdown to apply on the XML, the VM didn't start until I rebooted the server

Once more thank you for the answers. I removed the vdisks on the VM's. I used the device BY-ID, it worked perfectly but then a new doubt arise, if I use part1 and part2 to 2 distinguished VM's, will they boot windows normally or these disks can only be secundary? My PC as it is right now: 32gb ram 12c 24t (2x e5 2630v2) HDD data disk 3tb HDD cache disk 40gb No pariry due to license limitation for 6 disks. VM's P1 - 3c, 6gb ram, SSD 120 full passthrough + AMD Radeon RX480 P2 - 3c, 6gb ram, SSD 120 full passthrough + GeForce GTX 550 ti P3 - 2c, 6gb ram, HDD 500 full passthrough + AMD Radeon HD6750 P4 - 2c, 4gb ram, HDD 500 full passthrough + AMD Radeon 5450 I utilize various radeon because when I shut down the VM that has the nvidia, the same won't start again unless I do a full reboot of the system

hi When I try to do this procedure on my GTX550ti I get the error below root@Frank:~# lspci -v | grep VGA 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430] (prog-if 00 [VG A controller]) 04:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1) (prog-if 00 [VGA controller]) 0d:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 21) (prog-if 00 [VGA controller]) Flags: VGA palette snoop, medium devsel, IRQ 19, NUMA node 0 83:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480] (rev c7) (prog-i f 00 [VGA controller]) 84:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 6750] (prog-if 00 [VGA controller]) root@Frank:~# echo "0000:04:00.0" /sys/bus/pci/drivers/vfio-pci/unbind 0000:04:00.0 /sys/bus/pci/drivers/vfio-pci/unbind root@Frank:~# cd /sys/bus/pci/devices/0000:04:00.0/ root@Frank:/sys/bus/pci/devices/0000:04:00.0# root@Frank:/sys/bus/pci/devices/0000:04:00.0# cd /sys/bus/pci/devices/0000:04:00.0/ root@Frank:/sys/bus/pci/devices/0000:04:00.0# root@Frank:/sys/bus/pci/devices/0000:04:00.0# echo 1 > rom root@Frank:/sys/bus/pci/devices/0000:04:00.0# cat rom > /mnt/user/isos/gt550ti.dump cat: rom: Input/output error root@Frank:/sys/bus/pci/devices/0000:04:00.0#

Hi, Could you post the XMLs of your VMs? Configurations on passthoug, CPU and disks. ty

you need to enable both VGAs on the BIOS. let onboard vga running with the external.

First of all, let me thank you for the answers. Now let me see if I got this right. I have 5 gaming VM's with 2 cores and 4 threads to each of them a listed below: cpu 0 / 12 Unraid cpu 1 / 13 Unraid cpu 2 / 14 vm1 emu* cpu 3 / 15 cpu 4 / 16 vm2 emu* cpu 5 / 17 cpu 6 / 18 vm3 emu* cpu 7 / 19 cpu 8 / 20 vm4 emu* cpu 9 / 21 cpu 10 / 22 vm5 emu* cpu 11 / 23 I followed the same line as it was in your video with optimizing perfomance in mind, as such should I set the emulator pin 2,4,6,8,10 in every VM? <emulatorpin cpuset='2,4,6,8,10'/> Do you have any other tips for disks or some detail that I might have overlooked? Following an example of 1 VM: <domain type='kvm'> <name>Player 2</name> <uuid>c513c1e9-31eb-5467-881b-c140595ad758</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='8'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='20'/> <vcpupin vcpu='3' cpuset='21'/> <emulatorpin cpuset='2,4,6,8,10'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='2' threads='2'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/sde'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows10.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.118-2.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='nec-xhci'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:8b:3a:17'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes' xvga='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x84' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x84' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x10c4'/> <product id='0x8105'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1532'/> <product id='0x001b'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1c4f'/> <product id='0x0002'/> </source> <address type='usb' bus='0' port='3'/> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </memballoon> </devices> </domain>

I'm trying to isolate the CPU's to individual VM's, however when I edit the XML, the modification doesn't save. I altered in the system to isolate from the OS append isolcpus=2-11,14-23 initrd=/bzroot,/bzroot-gui By editing the XML <cputune> <vcpupin vcpu='0' cpuset='8'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='20'/> <vcpupin vcpu='3' cpuset='21'/> </cputune> to <cputune> <vcpupin vcpu='0' cpuset='8'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='20'/> <vcpupin vcpu='3' cpuset='21'/> <emnulatorpin cpuset='8,20'/> </cputune> But when I click in view xml with the VM started, the result is the following <cputune> <vcpupin vcpu='0' cpuset='8'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='20'/> <vcpupin vcpu='3' cpuset='21'/> </cputune> Unraid version 6.3.0rc5

I have the same doubt How did you set the SSD directly to the VM? And if SSD is where windows is installed? What are your disk settings? i have 5 disks and wanna use 2 of it for my gaming vms

OK thank you also thought about doing the passsthough of completely disk control , this would be a good option ? root@Frank:~# lspci | grep SATA 00:1f.2 SATA controller: Intel Corporation C600/X79 series chipset 6-Port SATA A HCI Controller (rev 05) 05:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset 4-Port S ATA Storage Control Unit (rev 05) 0a:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 10)

I have 5 discs, 3 of which are HDD and 2 SDD, I use 3 VM with passthrough for vídeo. I use 2 of them for gaming and 1 for common access. I'd like to know the best way for optimizing the use of the discs. My thought was HDD(3TB parity), HDD(3TB disk 1), HDD(500GB disk2), 2 SSD(120GB CACHE1/2). Or to use the discs exclusively to the VM, HDD(3TB parity), HDD(3TB disk 1), HDD(500GB cache), 2SSD(120GB for VM1/VM2) and VM3 on cache or disk1.

Hello, I have the motherboard Z9PE-D8 WS, it has 7 PCIe slots, being 1 to 4 for CPU1 and 5 to 7 for CPU2, when I try to use slots 5 to 7 it's trying to start from CPU1 and returns a non-permit error. I'd like to know how to set QEMU to initialize from CPU2. Configs P1 - SLOT 1 - GTX 550TI - ok P2 - SLOT 5 - Radeon 6750 - fail P.S. In case I try to use the Radeon on slot 3, it Works correctly. P.S.2 My BIOS is updated Msg of error - internal error: early end of file from monitor: possible problem: 2016-03-08T13:22:32.694206Z qemu-system-x86_64: -device vfio-pci,host=83:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: vfio: error opening /dev/vfio/47: Operation not permitted 2016-03-08T13:22:32.694236Z qemu-system-x86_64: -device vfio-pci,host=83:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: vfio: failed to get group 47 2016-03-08T13:22:32.694249Z qemu-system-x86_64: -device vfio-pci,host=83:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: Device initialization failed 2016-03-08T13:22:32.694260Z qemu-system-x86_64: -device vfio-pci,host=83:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on: Device 'vfio-pci' could not be initialized XML P2: <qemu:commandline> <qemu:arg value='-device'/> <qemu:arg value='ioh3420,bus=pci.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=83:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on'/> <qemu:arg value='-device'/> <qemu:arg value='vfio-pci,host=83:00.1,bus=root.1,addr=00.1'/> </qemu:commandline> root@Frank:~# lspci -v | grep VGA 03:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTX 550 Ti] (rev a1) (prog-if 00 [VGA controller]) 0d:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 21) (prog-if 00 [VGA controller]) 83:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper PRO [Radeon HD 6750] (prog-if 00 [VGA controller])