mata7

thanks for you guys help, just one more question in case that after tomorrow the percent dont Increases or for future knowledge, is there a command to stop preclear via shh without me forcing reboot manually the server again thanks

is HGST 8TB NAS Desktop, im gone let it running and see if tomorrow the the percent Increases

sorry man toronto canada time, Zeroing is ben runing for 9 hours, it take almost 14 hours to preread finish from yesterday 5:00pm to 7:00am this morning at 158mb/s , is this because is a 8tb hardrive? i never that run preclear have the webgui unreachable this is the first time, my system is i7 6800k, 32gb ram, asus x99 aii motherboard, running memtest for 3 pass 0 problem

thank you trurl, Zeroing is on 25% from 7:00am is that normal? btw is there a way to stop preclear from SSH?

im having a problem also, trying to preclear a bran new 8TB HGST Drive, this is the second time that im trying and what happen is after pre-read finish and start Zeroing " from 7:00am" the unraid web-gui get unresponsive the page it just wont load, everything on the system is working, sab, plex etc but the web-gui is unreachable , ssh work fine, there is no flashing going on the hard drive activity Led just a solid green light anyone please have any idea what the problem could be is there a way to SSH and check the preclear log to see if the Zeroing is working thanks in advanced

oh thanks god and you for that, do you mind when is down post here so me and other s knows about it and thank you very much for doing it, it really help people like me thanks

i been reading for more than 12 hours i still dont know how i cant do this, a few guide links are dead now, this look so complicate to do, is there any noob guide of step by step on how to do it thanks

thanks im gone read and search for it

hi guys can someone please tell me if is there a way of redirecting nextcloud address to my own subdomain or domain thanks in advanced

i fix it , i mean h310

No this ones https://www.amazon.com/Monoprice-30AWG-Internal-36-Pin-SFF-8087/dp/B008VLHOR2/ref=cm_cr_arp_d_product_top?ie=UTF8

I have 3 of the Dell H200 wich i belive are the same as the h310 on my norco case and they work great, i use 6 SFF-8807 monoprice cable

thanks for you help, please let me know if you find something, i definitely want to know what cause this errors

thanks try it and dint make any different same errors thanks

sorry but how do i turn off host passthrough thanks in advanced for you help

i got this one and they work great, i dont use any more but they where great https://www.newegg.com/Product/Product.aspx?Item=N82E16816133033 i use 6 of this one now https://www.amazon.com/Monoprice-30AWG-Internal-36-Pin-SFF-8087/dp/B008VLHOR2/ref=cm_cr_arp_d_product_top?ie=UTF8

here are the vmware xml if is need it <domain type='kvm' id='4'> <name>Windows 10</name> <uuid>aac11cc4-ae6e-7f09-2560-15d42b905e70</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>2097152</memory> <currentMemory unit='KiB'>2097152</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='3'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-2.7'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/aac11cc4-ae6e-7f09-2560-15d42b905e70_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='2' threads='2'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:ce:af:58'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-4-Windows 10/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5900' autoport='yes' websocket='5700' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> <seclabel type='none' model='none'/> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain>

thanks for you help here are my log, i really appreciate if someone can take look and see why im getting this errors server-diagnostics-20170224-2304.zip

hi guys can some please tell me what this errors means, im getting this on libvirt log on win10 vmware CPU i7-6800K CPU @ 3.40GHz Motherboard Asus X99-A II = last firmware update 32 GB Ram = i run memtest86 for all night without any errors Cache drive Intel 600p Series 512GB NVME M.2 SSD x86FeatureInData:780 : internal error: unknown CPU feature __kvm_hv_spinlocks x86FeatureInData:780 : internal error: unknown CPU feature __kvm_hv_vendor_id i was going to post the Diagnostics logs but want to ask first if is there any privacy on the logs that i should be concern about it thanks in advanced

hi guys i hope that someone can help me please i have Intel DZ77GA-70K motherboard bios are update to the last, and i have 3 dell h200 cards IT Mode here is my problem, if i install the 3 cards on the 3 pci express slot of the motherboard "2 pci express x16 blue and one pci express x4" the motherboard only recognize 2 of the dell cards i know that all pci express slot work fine because i tested individually and i also test the 3 Dell cards individually does anyone have any idea why it wont recognize the 3 cards and only 2 of then thanks in advanced

on the pic that i post above i believe is v 1.0

thanks great fans

nice the link dont work for me

just for curiosity, what are you guys hard drives temp on you norco, mine are from 29 to 40C all the time, using the default fans that came with the case Thanks

thank you johnnie, everything went well