thestraycat

Does anyone else suffer from ballooning memory usage on this container? Eventually it bricks my server. I'm running: binhex/arch-delugevpn:2.0.3-2-01

I'm loving this topic. I'm running the equivalent of the Norco 4224 and am looking at freeing up some pci-e slots on my X10-SRI-F motherboard I currently have 24 disks (old spinners) all connected to 3 x Dell H200 HBA's (Cross flashed to IT Mode) which gives me maximum throughput. But it takes up so many pci-e slots! I currently have the following on my board but was hoping to be able to get rid of 2 x Dell H200's with a solid 24 ports expander... 1 x PCI-e Gen3 (x16) - Dell H200 #1 1 x PCI-e Gen3 (x8) - Dell H200 #2 1 x PCI-e Gen3 (x8) - Dell H200 #3 1 x PCI-e Gen3 (x4) - Intel X540-T2 1 x PCI-e Gen2 (x4) 1 x PCI-e Gen2 (x1) I've been looking today at replacing 2 of the HBA's with an expander, but the HP SAS Expander (limited to 3gb/s for SATA) Looks to be a bit of a slouch and the Intel RES2SV240 can only support 20 drives! Would either of these configs be possible utilizing 2 x RES2SV24 as they seem quite cheap right now and i can power them from my 2 x pcie 2.0 slots without sacrificing any pci-e 3.0 slots? Dell H200 HBA Card 1 --> Link 1 --> 12 ports on Intel SAS expander RES2SV240 card (1) --> Link 2 --> 12 ports on Intel SAS expander RES2SV240 card (2) OR Dell H200 HBA Card 1 --> Link 1+2--> 12 ports on Intel SAS expander RES2SV240 card 1) Dell H200 HBA Card 2 --> Link 1+2 --> 12 ports on Intel SAS expander RES2SV240 card (2) ?? What would you guys say is the top end read/write speed of the new 10/12/14TB disks? I'm thinking if i can offer up around 185mb/s for each of my 24 spinner disks that's likely to be pretty optimal.... ??

Hi guys, I experienced a few issues with this docker myself over the last week or so. For me the issues seemed a little sporadic. Like a file/error/lock with the VPN config was getting generated on start, blocking the web UI then after a few reboots clearing and allowing the Web UI to start again. I resolved my issues by pointing at an old docker image (binhex/arch-delugevpn:2.0.3-2-01 -- which may be a red herring and might be simply just refreshing the image.) and then deleting my openvpn config from the container's openvpn folder and then re-pasting the config and restarting the container. Your mileage may vary. This is merely what worked for me and i can't elaborate on why this has helped.

3 years in and my server has become an adopted permanent member of the family. Last year on it's anniversary of conception we bought it a cake, sang it songs and put a hat on it. My friends think it's weird but it dosn't stop them accessing the services it provides. I'd call it a hobby but as it's in ear shot i fear i'd offend it's sense of self. They say you never know when it's the right time to bring another being into this world, but at the height of a 'Black Friday SSD blowout' myself and my partner felt confident it was just the right time for us.

Fixed. Had to rewrite the Nginx block... Weird. Something may have changed subtly. I was never happy with my block as icons never showed up right but everything else worked... All working now though.

@aptalca - Couldn't find the force, did unraid remove it? I have tried running old config files from a backup a month ago and also tried restoring a backup of my letsencrypt-nginx container in place with the new image and running that. All the same result. The only constant variable is the new image. Can i specify an old version of the heimdall container by changing the repository label in the docker settings?

The last heimdall update seems to have broken my instance through reverse proxy. Hitting the local port works fine. However the formatting is all messed up when hitting https://domainname anyone else?

Hmm. Didnt work for me. Tried both the repos listed and cant hit it.

I thought as much. Thanks for that. Good shout.

Worked. How did you know?

I'll grab some logs, but was wondering if it was a known issue at all? The device is simply used once a week at 5am on a Sunday as a flat file destination for container backup data using (the depreciated) CA backup v1 plugin. It's never used or accessed by anything else which is why I'm surprised it's being queried every second or so too list it's open files as shown by htop a reboot dosnt fix it either strangely.

Not sure why but for a while now my unassigned device is always intermittantly every second or so using 100% of a thread on a cpu... Any idea why? No VM's and all docker containers stopped. Fluctates between high 90's% and 100% on one thread.

Thanks trying that now.. Is it possible to change the sensor thresholds on X9SCM-F to effect when the mode changes from low/med/high?

Hi Johnnie.Black - So no further control than that then? I thought that was the whole point of this plugin? Do you know the differences betwen the 3 modes... I'm shooting for quiet fans.... I thought i'd read another guy had success with the X9SCM earlier in the thread?

Hi guys - Another X9SCM-F user here. I wantes to know if it was possible to control my Noctua PWM 4 pin fans with this plugin? I've attached a screenshot of my current reading. The current reading is showing that all my fans are at MAX, my BMC and BIOS are up to date. Can anyone advise what sort of thresholds i should look at setting to get them in control? Worth noting the server is doing nothing. Do my upper non-critical/upper critical and upper non-recover values look high?

Hi guys, Quick one... I have a Supermicro X9SCM-F and noticed that the temp for the CPU in the plugin says OEM and simply says low/medium/high I've been getting a lot of audible beeps for high CPU but have no way of knowing what the temp of the CPU actually is... I believe the thresholds may be set to low for CPU... How can i rectify this with the plugin?

Do you think i'll all victim to the rate limit if my container has potentially spammed out to their server? I read the limit may not be reset for a week or so potentially?

That's interesting. I was wondering if that was the case, as nothing had changed with my config, and the containers hadn't updated in the time window of the issue... Were you effected ijuarez and if so are you working now?

Hi everyone, A few problems today with Plex today and LetsEncrypt. Noticed this in my Letsencrypt container log. Anyone experienced anything similar? Nothings changed was working yesterday. Obviously references rate limits was wondering whether my network could have got confused/staled out a bit and that the container kept attempting to renew the cert and hit a rate limit or similar? Anyone had to fix anything similar? Processing /etc/letsencrypt/renewal/removedmyrealone.co.uk.conf- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Cert is due for renewal, auto-renewing...Plugins selected: Authenticator standalone, Installer NoneRunning pre-hook command: if ps aux | grep [n]ginx: > /dev/null; then s6-svc -d /var/run/s6/services/nginx; fiRenewing an existing certificateAttempting to renew cert (removedmyrealone.co.uk) from /etc/letsencrypt/renewal/removedmyrealone.co.uk.conf produced an unexpected error: urn:ietf:params:acme:error:rateLimited :: There were too many requests of a given type :: Error creating new order :: too many failed authorizations recently: see https://letsencrypt.org/docs/rate-limits/. Skipping.All renewal attempts failed. The following certs could not be renewed:/etc/letsencrypt/live/removedmyrealone/fullchain.pem (failure)- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -All renewal attempts failed. The following certs could not be renewed:/etc/letsencrypt/live/removedmyrealone/fullchain.pem (failure)- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Running post-hook command: if ps aux | grep 's6-supervise nginx' | grep -v grep > /dev/null; then s6-svc -u /var/run/s6/services/nginx; fi; cd /config/keys/letsencrypt && openssl pkcs12 -export -out privkey.pfx -inkey privkey.pem -in cert.pem -certfile chain.pem -passout pass: && cat {privkey,fullchain}.pem > priv-fullchain-bundle.pemHook command "if ps aux | grep 's6-supervise nginx' | grep -v grep > /dev/null; then s6-svc -u /var/run/s6/services/nginx; fi; cd /config/keys/letsencrypt && openssl pkcs12 -export -out privkey.pfx -inkey privkey.pem -in cert.pem -certfile chain.pem -passout pass: && cat {privkey,fullchain}.pem > priv-fullchain-bundle.pem" returned error code 1Error output from if:cat: {privkey,fullchain}.pem: No such file or directory1 renew failure(s), 0 parse failure(s)[cont-init.d] 50-config: exited 0.[cont-init.d] done.[services.d] starting services[services.d] done.nginx: [warn] could not build optimal proxy_headers_hash, you should increase either proxy_headers_hash_max_size: 512 or proxy_headers_hash_bucket_size: 64; ignoring proxy_headers_hash_bucket_sizenginx: [warn] could not build optimal proxy_headers_hash, you should increase either proxy_headers_hash_max_size: 512 or proxy_headers_hash_bucket_size: 64; ignoring proxy_headers_hash_bucket_sizeServer ready

Amazing! - Really looking forward to getting this up...

I get the same error... Anyone got a fix for where to set the hostname?

Firstly sorry for the newb question... But Interested in installing the pack purely for iperf but was a little worried about it modifying/removing any dependencies that unraid may rely on although im sure they install to a different place? Not quite sure how 'plugins' install in terms of isolation from the OS but assume they dont have the isolation of containers or VM's at all? Just looking for peace of mind really that there safe to install and remove at a later date without doing damage to the system in anyway?

I'm assuming that radarr's dronefactory wont process folders/files that havn't been created within Radarr. As in radarr wont auto process and auto import content from the dronefactory and make an entry for the movie unless it was prestaged in radarr?

Hi Squid - Totally agree and that side is fine. Importing and processing of media works like a dream between radarr, sonarr, sabnzbd and deluge that's not the problem for me. It's using the dronefactory feature as auto-processing watch folder for downloads that happen outside of radarr/sonarr that is the issue.

Pretty sure i've tried it but i'll give it a go now! I take it you mean change it on radarr, sonarr and sab? UPDATE: Just turned off radarr. Remapped the /downloads -> /mnt/cache/appdata/downloads/ Havn't done sabnzbd or sonarr yet as they shouldn't have anything to do with this test. and still nothing. Clicking on the drone factory button under "wanted" did take a minute or so to finish but nothing was processed. I have around 160 folders (each a movie in the drone factory at the moment for what it's worth, ive also tried moving them all out and keeping 1 film in the folder and restarting) Nothing. Can anyone post there container mappings, radarr/sonarr drone factory path and potentially there remote mappings for me to try emulating? UPDATE: Renamed the old radar drone factory -> radardrone2) created a new folder called radardrone. Copied 1 movie with a reasonably nice name into this folder for the radardrone to post process. Nothing. And no mention in the logs about it from forcing the radardrone factory to scan