kormalan

Hello, I don't know how the 8 eight disks of my server were affected... How to identify the two parity disks of my server ? Once the disks have been identified (I hope...) Will I be able to define the data disks in any order ? How should I proceed so as not to lose anything ? Best regards

Hello, My Windows 10 Pro client PC is connected via an USB cable to my smartphone that shares its Internet 4G connection. I connect to the OpenVPN server without any problem with an OpenVPN GUI client x64. Ping the machines of my local network is ok. But, all connections with my web browser fail. So I do not have access to the Unraid Web interface. Of course I do not get a local IP and I do not know why !!! My Gateway is 192.168.1.254. Also, there is an error in the log of openvpn client : - Options error: Unrecognized option or missing or extra parameter(s) in [PUSH-OPTIONS]:3: remote-gateway (2.4.7) Can you please help me ? Bellow all my configuration: WAN IP XXXX.XXXX.XXXX.XXXX UNRAID SERVER IP 192.168.1.200 LAN GATEWAY 192.168.1.254 OPENVPN / EASYRSA VERSION 2.4.6/Master IPCONFIG on Windows 10 Pro 64 bits ---------------------------------- Configuration IP de Windows Carte Ethernet Ethernet : Statut du média. . . . . . . . . . . . : Média déconnecté Suffixe DNS propre à la connexion. . . : lan Carte réseau sans fil Connexion au réseau local* 1 : Statut du média. . . . . . . . . . . . : Média déconnecté Suffixe DNS propre à la connexion. . . : Carte réseau sans fil Connexion au réseau local* 2 : Statut du média. . . . . . . . . . . . : Média déconnecté Suffixe DNS propre à la connexion. . . : Carte Ethernet Ethernet 2 : Suffixe DNS propre à la connexion. . . : Adresse IPv6 de liaison locale. . . . .: fe80::24fc:59a0:7f83:cdb4%17 Adresse IPv4. . . . . . . . . . . . . .: 10.8.0.6 Masque de sous-réseau. . . . . . . . . : 255.255.255.252 Passerelle par défaut. . . . . . . . . : Carte Ethernet Connexion réseau Bluetooth : Statut du média. . . . . . . . . . . . : Média déconnecté Suffixe DNS propre à la connexion. . . : Carte réseau sans fil Wi-Fi : Statut du média. . . . . . . . . . . . : Média déconnecté Suffixe DNS propre à la connexion. . . : lan Carte Ethernet Ethernet 3 : Suffixe DNS propre à la connexion. . . : Adresse IPv6 de liaison locale. . . . .: fe80::b083:1d04:ebf4:7bb4%45 Adresse IPv4. . . . . . . . . . . . . .: 192.168.42.32 Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : 192.168.42.129 CLIENT SIDE LOG (OPENVPN CLIENT GUI on Windows 10 Pro 64 bits) -------------------------------------------------------------- Sun May 26 21:59:32 2019 OpenVPN 2.4.7 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Feb 21 2019 Sun May 26 21:59:32 2019 Windows version 6.2 (Windows 8 or greater) 64bit Sun May 26 21:59:32 2019 library versions: OpenSSL 1.1.0j 20 Nov 2018, LZO 2.10 Enter Management Password: Sun May 26 21:59:32 2019 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Sun May 26 21:59:32 2019 Need hold release from management interface, waiting... Sun May 26 21:59:32 2019 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Sun May 26 21:59:32 2019 MANAGEMENT: CMD 'state on' Sun May 26 21:59:32 2019 MANAGEMENT: CMD 'log all on' Sun May 26 21:59:32 2019 MANAGEMENT: CMD 'echo all on' Sun May 26 21:59:32 2019 MANAGEMENT: CMD 'bytecount 5' Sun May 26 21:59:32 2019 MANAGEMENT: CMD 'hold off' Sun May 26 21:59:32 2019 MANAGEMENT: CMD 'hold release' Sun May 26 21:59:32 2019 Outgoing Control Channel Encryption: Cipher 'AES-256-CTR' initialized with 256 bit key Sun May 26 21:59:32 2019 Outgoing Control Channel Encryption: Using 256 bit message hash 'SHA256' for HMAC authentication Sun May 26 21:59:32 2019 Incoming Control Channel Encryption: Cipher 'AES-256-CTR' initialized with 256 bit key Sun May 26 21:59:32 2019 Incoming Control Channel Encryption: Using 256 bit message hash 'SHA256' for HMAC authentication Sun May 26 21:59:32 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]XXXX.XXXX.XXXX.XXXX:1194 Sun May 26 21:59:32 2019 Socket Buffers: R=[65536->65536] S=[65536->65536] Sun May 26 21:59:32 2019 UDP link local: (not bound) Sun May 26 21:59:32 2019 UDP link remote: [AF_INET]XXXX.XXXX.XXXX.XXXX:1194 Sun May 26 21:59:32 2019 MANAGEMENT: >STATE:1558900772,WAIT,,,,,, Sun May 26 21:59:32 2019 MANAGEMENT: >STATE:1558900772,AUTH,,,,,, Sun May 26 21:59:32 2019 TLS: Initial packet from [AF_INET]XXXX.XXXX.XXXX.XXXX:1194, sid=e175b8f2 8b8e5482 Sun May 26 21:59:32 2019 VERIFY OK: depth=1, CN=server Sun May 26 21:59:32 2019 VERIFY KU OK Sun May 26 21:59:32 2019 Validating certificate extended key usage Sun May 26 21:59:32 2019 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Sun May 26 21:59:32 2019 VERIFY EKU OK Sun May 26 21:59:32 2019 VERIFY OK: depth=0, CN=server Sun May 26 21:59:33 2019 Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA Sun May 26 21:59:33 2019 [server] Peer Connection Initiated with [AF_INET]XXXX.XXXX.XXXX.XXXX:1194 Sun May 26 21:59:34 2019 MANAGEMENT: >STATE:1558900774,GET_CONFIG,,,,,, Sun May 26 21:59:34 2019 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) --- Sun May 26 21:59:34 2019 PUSH: Received control message: 'PUSH_REPLY,dhcp-option DNS 192.168.1.254,redirect-gateway local def1,remote-gateway 192.168.1.200,resolv-retry infinite,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5,peer-id 0,cipher AES-256-GCM' --- Sun May 26 21:59:34 2019 Options error: Unrecognized option or missing or extra parameter(s) in [PUSH-OPTIONS]:3: remote-gateway (2.4.7) --- Sun May 26 21:59:34 2019 Options error: option 'resolv-retry' cannot be used in this context ([PUSH-OPTIONS]) Sun May 26 21:59:34 2019 OPTIONS IMPORT: timers and/or timeouts modified Sun May 26 21:59:34 2019 OPTIONS IMPORT: --ifconfig/up options modified Sun May 26 21:59:34 2019 OPTIONS IMPORT: route options modified Sun May 26 21:59:34 2019 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun May 26 21:59:34 2019 OPTIONS IMPORT: peer-id set Sun May 26 21:59:34 2019 OPTIONS IMPORT: adjusting link_mtu to 1625 Sun May 26 21:59:34 2019 OPTIONS IMPORT: data channel crypto options modified Sun May 26 21:59:34 2019 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sun May 26 21:59:34 2019 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sun May 26 21:59:34 2019 interactive service msg_channel=920 Sun May 26 21:59:34 2019 ROUTE_GATEWAY 192.168.42.129/255.255.255.0 I=45 HWADDR=02:7c:59:35:30:5f Sun May 26 21:59:34 2019 open_tun Sun May 26 21:59:34 2019 TAP-WIN32 device [Ethernet 2] opened: \\.\Global\{D8BE8B5E-39EB-4160-B671-197B2CBA8E5B}.tap Sun May 26 21:59:34 2019 TAP-Windows Driver Version 9.21 Sun May 26 21:59:34 2019 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {D8BE8B5E-39EB-4160-B671-197B2CBA8E5B} [DHCP-serv: 10.8.0.5, lease-time: 31536000] Sun May 26 21:59:34 2019 Successful ARP Flush on interface [17] {D8BE8B5E-39EB-4160-B671-197B2CBA8E5B} Sun May 26 21:59:34 2019 MANAGEMENT: >STATE:1558900774,ASSIGN_IP,,10.8.0.6,,,, Sun May 26 21:59:36 2019 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Sun May 26 21:59:36 2019 C:\Windows\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5 Sun May 26 21:59:36 2019 Route addition via service succeeded Sun May 26 21:59:36 2019 C:\Windows\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5 Sun May 26 21:59:36 2019 Route addition via service succeeded Sun May 26 21:59:36 2019 MANAGEMENT: >STATE:1558900776,ADD_ROUTES,,,,,, Sun May 26 21:59:36 2019 C:\Windows\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5 Sun May 26 21:59:36 2019 Route addition via service succeeded Sun May 26 21:59:36 2019 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun May 26 21:59:36 2019 Initialization Sequence Completed Sun May 26 21:59:36 2019 MANAGEMENT: >STATE:1558900776,CONNECTED,SUCCESS,10.8.0.6,XXXX.XXXX.XXXX.XXXX,1194,, DEFAUKLT CONFIG - CLIENT SIDE CONFIG (OPENVPN CLIENT GUI on Windows 10 Pro 64 bits) ----------------------------------------------------------------------------------- remote XXXX.XXXX.XXXX.XXXX tls-client cipher AES-256-GCM auth sha512 client dev tun proto udp port 1194 nobind persist-key persist-tun resolv-retry infinite comp-lzo adaptive verb 3 mute-replay-warnings tls-version-min 1.2 remote-cert-tls server remote-cert-eku "TLS Web Server Authentication" route-delay 2 tls-cipher TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA38:TLS-DHE-RSA-WITH-AES-256-GCM-SHA384:TLS-DHE-RSA-WITH-AES-256-CBC-SHA DEFAULT CONFIG - SERVER SIDE CONFIG ----------------------------------- Dynamic DNS OpenVPN server IP 10.8.0.0 Netmask 255.255.255.0 Allow Client to Client no Pushing DHCP options to clients DNS local gateway Port for the server 1194 Tunnel Protocol UDP Encryption Ciphers AES-256-GCM Hash Algorithm SHA512 Control channel encryption (tls-crypt) yes ifconfig-pool-persist ipp.txt yes Redirect-gateway redirect gateway def1 Topology subnet no Push LAN subnet to the clients yes LZO Compression adaptive TELNET management console no LOG settings 3 OpenVPN Port-Share

Hello, I update unRAID system on the USB key, then I upgraded my hardware : from a HP MicroServer to a Dell PowerEdge T320 with 8 G0 of RAM To do this I unplug the USB key from my HP Server and reconnected it to my Dell Server. On that Dell configuration I used 8 new disks : · 2 parity disks of 2TO · 2 data disks of 2TO · 3 data disks of 1TO · 1 cache disk (not configured yet) I upgrade my license up to 12 disks. After that I have : · in the option panel selected the “new config” option ; · I start the array ; · after several hours the parity disks are initialized. Now I try to create one “User Share” : · But when I click on ADD button a new blank page is displayed, nothing else happens. I probably forgot something. Can anyone please help me ? Thanks in advance. Alan

Dear All, I can not create the first admin user at the first ownCloud connection. Error msg is : Cannot write in /mnt/user/appdata/mariadb (It's not exactly that the message is in french.) Owncloud form to create administrator account User: admin Password: xxxxx Database engine: MySQL/MariaDB Data directory: /mnt/user/appdata/mariadb User: ocuser Password: xxxx Database name: owncloud Host (database): 192.168.1.210 UnRaid informations UnRaid version: 6.1.9 Docker version 1.7.1, build 786b29d4 Share appdata exist, security is Public (for a moment) and export is No User ocuser exist Docker Containers Informations Containers MariabDB: needo/mariadb:latest Container Volume Host Path /db /mnt/user/appdata/mariadb Container Port Host Port 3306 3306 Containers Owncloud: gfjardim/owncloud:latest Container Volume Host Path /var/www/owncloud/data /mnt/user/appdata/owncloud Container Port Host Port 8000 8000 ls of /mnt/user/appdata/mariadb root@Tower:/mnt/user/appdata/mariadb# ls -l total 28704 -rw-rw---- 1 nobody users 16384 Apr 26 17:02 aria_log.00000001 -rw-rw---- 1 nobody users 52 Apr 26 17:02 aria_log_control -rw-rw---- 1 nobody users 5242880 Apr 26 17:02 ib_logfile0 -rw-rw---- 1 nobody users 5242880 Apr 26 17:02 ib_logfile1 -rw-rw---- 1 nobody users 18874368 Apr 26 17:02 ibdata1 drwx------ 1 nobody root 4096 Apr 26 17:02 mysql/ -rw-rw---- 1 nobody users 3201 Apr 26 17:02 mysql_safe.log drwx------ 1 nobody users 4096 Apr 26 17:02 performance_schema/ Questions What are the permissions to grant and to whom ? Is it only a permission problem ? How to effectively protect appdata sharing ? Thank's for your help

Thank's for all your answer. I update from Unraid 4 because my USB key is "dead" and I had not made backup. After assigning all the hard drives in particular the parity disk (I had made a paper copy of serial number and assignment that I had placed in the server ; I can not do only bullshit ) I started the array and I recovered all my data. Now I backup everything and I rebuild a new system (Unraid 6, XFS FS, etc.)

Hi all, I have an old Unraid system, version 4 and I update it to Unraid 6. Because I am not a very Linux expert I have a basic question : Now that I have a new USB key with a Basic licence ; how should I proceed to get my array of 4 discs without losing any data Thanks's for your help.