cyruspy

quick update, found this docker image that provides the AMS service daemon (one of the services that talk to iLO). It's a great start, but I'm dead in the water after installing it as docker image because of a missing kernel module: Error: hpilo kernel module is not loaded What would be the correct way to introduce the kernel module?

Hello!, has anybody succeed installing the HPE Management Components Pack in unRAID?. I have unRAID running on a Microserver Gen8 and would like to improve monitoring of it's hardware using MCP. Unluckily, there's no Slackware specific packaging available. Ref: https://downloads.linux.hpe.com/SDR/project/mcp/

Thanks. Will give it a try.

About to purchase Tesla P4 for my unraid machine.

Hello!, 1. Would you consider adding support for Tesla cards?. 2. Wouldn't going with vGPU/SR-IOV allow using the card for containers (emby/shinobi) and VMs (Windows) at the same time?

can anybody recommend an "intelligent" upgrade for my unRAID NAS?. The situation is: NAS is underpowered to also run a Windows 11 Virtual Desktop & my dedicated lab machine is powered off since a year ago (got access to a lab at the office). Requirement would be: more compute power for the NAS, lower noise if possible. Either reusing hardware or selling everything and getting something better/more appropiated. ## Spares parts # Memory 16 x 8GB 2Rx4 PC3-12800R-11-11-E2 (HMT31GR7CFR4C-PB T8 AE) # Heatsink 1 x BKT-0028L # CPU 2 x Intel Xeon E5-2670 (8c, 2.6GHz) ## NAS (24x7) 1 x Supermicro X9SCL/X9SCM 1 x Xeon E3-1265L v2 (4c, 2.5GHz) 4 x 8GB ECC DDR3 1333MT/s (HMT41GU7MFR8A-H9) 1 x Solarflare SFN7x02F-R2 (dual 10GbE-SFP+) 2 x Broadcom / LSI SAS2008 - Dell 6Gbps SAS HBA Adapter - Dell 6Gbps SAS HBA Adapter 1 x Broadcom / LSI SAS2308 - Hewlett Packard Enterprise H220i ## Lab node (seldom used) 1 x Intel S2600CP 2 x Xeon E5-2680 v2 (10c, 2.8GHz) 16 x 32GB Hynix ECC DDR3 PC3-12800L (HMT84GL7AMR4A-PB) 1 x Intel RAID Controller RS3DC080 1 x Solarflare SFN7x02F-R2 (dual 10GbE-SFP+)

Actually it was working for a couple of days. One day the NIC was gone. Only tried with virtio & virtio-net, the culprit is that the network device is not present in the device tree of the Windows guest. (not the case where present and lacking driver)

Hello!, I've installed Windows 11 in a VM with virtio-net. Today I found that the VM is missing the NIC (present in the VM definition, but not present in Device Manager). Also tried to add a second interfase, but after going back to the setup, the second interfase is not present in the VM definition (only the first one is present). Have anybody seen this scenario? Regards.

is it possible to use hddtemp without waking up the disks?

Hello!, can usb_modeswitch be added? Ref: https://www.draisberghof.de/usb_modeswitch/ Basically it allows to change the USB mode of LTE modems from storage to modem.

Where do we put a feature request for this? The use case is you don't even put an IP on the physical interface, it's only a carrier with the highest MTU possible. Then you create VLANs for the different services. For unraid it would be: - physical interface: MTU=1500 - regular use (content consumption): MTU=1500 - NAS network for home lab: MTU=9000 Those VLANs must support any of all the parameters you're supposed to define to a interface.

Hello!, I'm running 6.9.1 and I cannot access to any of the containers' web interface through the network, did a quick review of the logs but my web browser' just errors out with a timeout message. Is this something you've seen? Before updating (6.9.0), I recreated the docker.img and containers without any change. Aftewards updated to 6.9.1 and it's the same...

To be honest, because I'm lazy, and micro-management for home workloads doesn't add any value (to me?). If there's a sudden spike of load, would you be shuffling VM/CPU assignment?, even worse if you cannot change configuration without shutting down a VM in unRAID. It's really easy to get an unbalanced CPU consumption, and this is only with 6 VMs:

Hello!, would it be possible to disable CPU pinning (selecting which thread should a VM have access to)?, I really don't want to do micro-management of which cores are used. I just would like to say "this VM can use 2 vCPU/Threads". For a home/personal use, I really don't care which ones are being used.

Hello!, is it possible to manually set tray layouts positions?. Have 3 5in3 boxes, and a an 4in1 boxes. Each of them defined as a different group. I would like to have in the representation this view (top to down): 4x2.5"-in-1 box (box0) 5x3.5"-in-3 box (box1) 5x3.5"-in-3 box (box2) 5x3.5"-in-3 box (box3) Just like I see it in the tower.

Thanks!, completely missed the banner detail..

I think it's as good as it gets right now, another model that would better suit you is for them charge by actual capacity (regardless of using 20x2TB vs 4x10TB) and not by disk count, but will suck for the rest of us in this tiny universe

interestingly enough, the other songs I hear for enterprise are: - we need to run a tender always - procurement process is too cumbersome to do it just for us$ 5k

Hello!, how do I check which licensing level do I have?. The status page for the license only states how many disks I have now, but doesn't state what's my max licensed/allowed slots.

Hello!, Anybody with experience with any 4in1 and 6in1 cages that can provide feedback on noise & heat?. I've been evaluating these: Icy Dock MB994SP-4SB-1 Icy Dock MB607SP-B Silverstone FS204B But lately though about jumping to the 6 drive cages: Icy Dock MB608SP-B Icy Dock MB996SP-6SB

I'm planning to build a NAS with these components: 3 x CSE-M35TQB 2 x PERC H310 1 x HP 9205-8i 6 x Supermicro Cbl-0097L-02 cables 1 × Supermicro X9SCM-F MB Should that mix allow SES2 signaling?, I'm mostly interested in the use of the failure LED.

I'm wondering how many users from Paraguay and or LATAM do we have lurking the forums. In the trade section I see offers from UK, US and Australia but not much from LATAM. Facebook trading group are messy, would like to shop locally using our tidier forums 😉

Well that build has been frozen for some years. I would like to restart it. Still have the 3 x CSE-M35TQB cages and 2 x H310. Also, I plan to get 1 x H220. This will allow me to match 1 cage to 1 HBA, 5 ports per HBA (3 unused ports per HBA). Waiting for an E3-1265L v2 and X9SCM-F. Will kill 3 PCIe slots but SES2 LEDs should work. Any better ideas?

Hello!, how do I access the guacd log?

Hello!, Just installed the plugin in the hope of being able to monitor my generic UPS. From the autodetect function, I got this configuration: These are the detected USB devices: But I get "Access denied" errors while testing the driver: Detailed device info: Any hints?