Paul_Ber

I got the LCD character display working in a Windows 7 VM but of course that only shows stats for the VM. I do have problems with the LCD panel stopped working until an unRAID reboot. So much easier if it was part of unRAID natively. Sent from my XT1563 using Tapatalk

APC BR1500G works fine. Sent from my XT1563 using Tapatalk

Thanks for the guide. Was able to passthru a whole USB 3.0 PCIe card I got off of Amazon. https://www.amazon.ca/gp/product/B00PAFDW3M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 I tried using the included Sata to Sata adapter but the PC would not boot until I switched to the 4 pin molex power. Before all this i used the GUI settings and added the LCD panel I wanted in my Ubuntu 16.04 VM only. root@unRAID:~# lspci | grep USB 05:00.0 USB controller: Fresco Logic Device 1100 (rev 10) Otheres but not relavant Got ../../../devices/pci0000:00/0000:00:09.0/0000:05:00.0/usb12 and usb13 Used un devices: <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </source> </hostdev> Without the separate USB PCIe card and passing the whole card thru I could never pass my mouse,keyboard, and LCD panel without losing either the mouse or keyboard. I got LCDproc working in my VM now but would prefer it to be working for only unRAID stats next. The GTX750ti takes up 2 spaces covering up the PCIe x1 next to the PCIe x 16 blue slot. Have a cheap Nvidia G210 in the black slot and an old Radeon 7K pci card. So not much room left.

[Feature Request] During the setup it gets the sending email account but actually sends to email to the Plex email account. Is there a way to have to option set multiple email addresses that the email goes to? I.e. etc This way you can send it to the whole family.

Hi, Ninthwalker what is your opinion on changing the Docker-template area that says /mnt/cache/.Programs/plexreport to /mnt/cache/appdata/Programs/plexreport ? Most other Devs are using /mnt/cache/appdata/someapp. My fault not not paying attention to the /mnt/cache/.Programs area of the /config. I had to edit and change it to appdata and manually go and delete the /mnt/cache/.Programs/plexreport files and directories. So the email probably will not work for Gmail with 2 factor? When I go bash into the Docker to run the config, the Docker doesn't have its' own hash for a container? A bit confusing as to whether one is actually in the Container or not?

So PID will give HD option? I just tried on a show and the video doesn't look that great. Do I need to put HD in the name? Sent from my XT1563 using Tapatalk

I think I can answer my own question. Sent from my XT1563 using Tapatalk

no need, thats what privoxy is for :-) Q4. http://lime-technology.com/forum/index.php?topic=45812.msg437678#msg437678 How do I point it to Privoxy?

Having trouble with it saying it is attached but it it really isn't. 2016-05-05T23:14:48.841647Z Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "3" (high speed) 2016-05-05T23:14:50.846662Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "3" (high speed) 2016-05-05T23:14:52.851673Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "3" (high speed) 2016-05-05T23:15:29.339799Z Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "4" (high speed) 2016-05-05T23:15:31.344832Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "4" (high speed) 2016-05-05T23:15:33.349855Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "4" (high speed) 2016-05-05T23:16:34.771175Z Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "5" (high speed) 2016-05-05T23:16:36.775188Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "5" (high speed) 2016-05-05T23:16:38.779193Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "5" (high speed) 2016-05-05T23:16:41.986233Z Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "6" (high speed) 2016-05-05T23:16:43.990302Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "6" (high speed) 2016-05-05T23:16:45.994311Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "6" (high speed) 2016-05-05T23:18:06.135774Z Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "3" (high speed) 2016-05-05T23:18:08.140794Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "3" (high speed) 2016-05-05T23:18:10.145803Z qemu-system-x86_64: Warning: speed mismatch trying to attach usb device "FT232R USB UART" (full speed) to bus "usb.0", port "3" (high speed) I wonder if I need to change the USB controller like in one of the first few posts. Before I tried this plugin when I try and attach this with the normal Docker settings and then boot the VM, my keyboard stops working. So am going to try and change the controller settings XML.

Add VPN and watch outside UK?

It would be really cool if we could code DelugeVPN so that when you install the container, if by setting a Environment Variable to the various torrent types, that the code could adjust to the desired torrent app.

I have been trying to get LCDproc working in a Docker and passing the /dev/bus/xxx/xxx and /dev/ttyUSBx with no luck. I tried passing the lis based panel to a Linux VM but somehow it causes my assigned keyboard to stop working. Sent from my XT1563 using Tapatalk

Easier to use VPN. I know it costs $ but so much more anonymous. Blacklists will not block everything needed. Sent from my XT1563 using Tapatalk

I thought with Nvidia GPU you had to disable HyperV? Sent from my XT1563 using Tapatalk

Thanks I figured it was something like that. Sent from my XT1563 using Tapatalk

Passing my variable like this: The variable is passed fine: [root@939b57ae6d42 config]# echo ${DRIVER} lis Inside a *conf file: # The following drivers are supported: # bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, g15, glcd, # glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior, irman, joy, # lb216, lcdm001, lcterm, lirc, lis, MD8800,, mdm166a, ms6931, mtc_s16209x, # MtxOrb, mx5000, NoritakeVFD, picolcd,, pyramid, rawserial, sdeclcd, # sed1330, sed1520, serialPOS, serialVFD, shuttleVFD, sli,, stv5730, svga, # t6963, text, tyan, ula200, vlsys_m428, xosd Driver=${DRIVER} Instead of it being the variable I am getting ${DRIVER} [root@939b57ae6d42 config]# /usr/bin/LCDd -c /config/LCDd.conf Could not open driver module /usr/lib/lcdproc/${DRIVER}.so: /usr/lib/lcdproc/${DRIVER}.so: cannot open shared object file: No such file or directory Driver [${DRIVER}] binding failed Could not load driver ${DRIVER} There is no output driver Critical error while initializing, abort. It has to be something really simple I am missing in the formatting.

Questions for FAQ more for authors: 1). Mapping USB device so Container can use the USB device? Will unRaid need drivers for the USB device or just the Container? Pass by bus or what USB shows up in unRAID? I.e. /dev/ttyUSB1 2). Let a Container see unRAID system stats like CPU %, Bandwidth, ram, disk % etc. Sent from my XT1563 using Tapatalk

or binhex What is the reason most people do not use the Limetech version of Plex? Sent from my XT1563 using Tapatalk

Is the auto update only if the Dev had a new build happen in DockerHub? If an app inside the container gets a new version does the container update that app on a container restart, or does the Dev need to get DockerHub to build a new version? Sent from my XT1563 using Tapatalk

Thanks, this fixed the issue! Torrents are also uploading, does this mean the incoming port works? Speeds are 300-600 kbps (on popular torrents) which is nothing compared to the 14 MB/s I get using newsgroups. Maybe I'll try PIA for a month and see if speeds improve. Thank you very much! [edit] I'm getting about 7 MB/s with PIA . Too bad about the remaining 4 months @ PureVPN though I am trying out airVPN for a month and works great, is fast, I never need max download speed because I set a max rate in Deluge to not saturate our LAN. I also think with VPN I will not have all kind of connections open through the local router. With VPN it is invisible to the Telco and hopefully doesn't cause problems with the STBs on LAN. My setup before was a Linux box with Deluge, Flexget, and Peerguardian Linux. unRAID and DelugeVPN make it so simple(my setup uses my Docker DelugeVPN-Flexget). Sent from my XT1563 using Tapatalk

After some updates it started working. I gave up on Win 10, too many resources. Went back to Windows 7, once got the broken Windows update fixed, I got all updates installed using the offline installer. Disabled all the Windows features not needed and turned that dam Trusted Installer process to disabled, now got a 1 CPU VM with 1-5% CPU usage. I am running EventGhost with USB-UIRT and webserver to host webpage to have STB IR remote functions that is called by Mythtv on another Linux box. How well does the Mythtv Docker work? Sent from my XT1563 using Tapatalk

What about wake on LAN for a Windows 7 VM? Sent from my XT1563 using Tapatalk

Will unRaid also need the libftdi or something like that for the USB serial device to work correctly? I am trying to figure out how to get my lis driver USB LCD 20*2 working by way of a container and also show the unRAID system stuff that LCDproc would normally rotate thru. I got it working thru a Win 7 VM and passing the USB device but it only show the system data for only the VM. I got a container in Github and DockerHub and got most of the programing work done, just have to tie it all together. Sent from my XT1563 using Tapatalk

There was an android app update for Plex today. All references to app = Android Plex app. I had synced a TV show this morning. Updated app to new version. At lunch time the app wouldn't play the synced TV show. I forgot to write down the error message but the app was crashing. Deleted synced TV show. Uninstalled app. Downloaded previous app from apkmirror. Installed. Was able to stream my TV show fine. Didn't get a chance to trying syncing again. It is not on the unRAID side because the Server end is April 22, 2016.

I just installed Win 10 in a VM and cannot also see the unRAID server in Explorer either. Some have said to change Ethernet driver to an older one but Win 10 will not let me change it. It keeps saying the driver is fine. My Win 7 VM can see unRAID fine. Sent from my XT1563 using Tapatalk