ThermodynamicEntropy

Hello, I've been using this ubooquity docker for a while now. I had never updated it (mainly because I had no need to) until yesterday. Although I can get to the webgui with no problem, I cannot seem to find the settings page. The only things I see are directories to my media (see attached screenshot). Is there any way for me to get to a settings page?

Hello, peter_sm. I've used your openvpn plugin for a long time now with great success. I've recently completely wiped and re-created my unraid server so I just started a fresh install of this plugin. After generating the server certs and keys my console says this: cp: cannot stat '/mnt/user/addonfiles/plugins/openvpn//easy-rsa/easyrsa3/pki/issued/server.crt' :no such file or directory. I think the "//easy-rsa" is the issue here. If I attempt to create a client, the log outputs this, although, when I go to /easyrsa3/pki/issued and ls it, there's nothing in there. Adding client: test spawn ./easyrsa build-client-full test nopass Generating a 2048 bit RSA private key ........................................+++ ...................................+++ writing new private key to '/mnt/user/addonfiles/plugins/openvpn/easy-rsa/easyrsa3/pki/private/test.key.XXXXe88HYH' ----- Using configuration from ./openssl-1.0.cnf Enter pass phrase for /mnt/user/addonfiles/plugins/openvpn/easy-rsa/easyrsa3/pki/private/ca.key: Check that the request matches the signature Signature ok The Subject's Distinguished Name is as follows commonName :ASN.1 12:'test' ERROR: adding extensions in section default 47021822819864:error:22097082:X509 V3 routines:DO_EXT_NCONF:unknown extension name:v3_conf.c:125: 47021822819864:error:22098080:X509 V3 routines:X509V3_EXT_nconf:error in extension:v3_conf.c:95:name=copy_extensions, value=copy Easy-RSA error: signing failed (openssl output above may have more detail) cp: cannot stat '/mnt/user/addonfiles/plugins/openvpn//easy-rsa/easyrsa3/pki/issued/test.crt': No such file or directory you got only one client script, instead of script plus 4 keys and certs /usr/local/emhttp/plugins/openvpnserver/scripts/rc.openvpnserver: line 494: ./test.crt: No such file or directory cp: cannot stat 'test.crt': No such file or directory rm: cannot remove 'test.crt': No such file or directory Done Inline file ! and no cert is created. Any help would be greatly appreciated.

48gB of DDR3 ECC RAM. I have an automated media configuration (Ombi + Sonarr + Radarr + NowShowing + Jackett + Deluge + Plex) which is fairly light on the ram, and I have ~20 vms open a most times. Granted, I don't need to have them open, but I always do.

Is there any way to make this CLI friendly? I've been using the phaze plugin for a while now (I like custom scripts), but it's given me some issues with things like getting subtitles. If possible, Ir'd rather just create scripts/aliases similar to my ones from the plugin.

I'm having a similar issue to roland (in regards to not being able to access the gui), however my vpn provider's certs don't seem to be the issue. These are my debug logs (I went back to a previous version of deluge, and also attempted a fresh install with new configs, all to no avail) 2017-05-17 09:29:00.893048 [info] Starting Supervisor... 2017-05-17 09:29:01,439 CRIT Set uid to user 0 2017-05-17 09:29:01,439 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing 2017-05-17 09:29:01,444 INFO supervisord started with pid 7 2017-05-17 09:29:02,446 INFO spawned: 'start-script' with pid 112 2017-05-17 09:29:02,447 INFO spawned: 'deluge-script' with pid 113 2017-05-17 09:29:02,449 INFO spawned: 'deluge-web-script' with pid 114 2017-05-17 09:29:02,450 INFO spawned: 'privoxy-script' with pid 115 2017-05-17 09:29:02,459 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2017-05-17 09:29:02,459 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-05-17 09:29:02,459 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-05-17 09:29:02,460 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-05-17 09:29:02,460 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-05-17 09:29:02,461 DEBG 'deluge-script' stdout output: [info] Deluge config file already exists, skipping copy 2017-05-17 09:29:02,462 DEBG 'deluge-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2017-05-17 09:29:02,462 DEBG 'deluge-script' stdout output: [debug] Waiting for valid IP address from tunnel... 2017-05-17 09:29:02,465 DEBG 'privoxy-script' stdout output: [info] Privoxy set to disabled 2017-05-17 09:29:02,466 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 47283889609760 for <Subprocess at 47283888881536 with name privoxy-script in state RUNNING> (stderr)> 2017-05-17 09:29:02,466 DEBG fd 22 closed, stopped monitoring <POutputDispatcher at 47283889610048 for <Subprocess at 47283888881536 with name privoxy-script in state RUNNING> (stdout)> 2017-05-17 09:29:02,466 INFO exited: privoxy-script (exit status 0; expected) 2017-05-17 09:29:02,467 DEBG received SIGCLD indicating a child quit 2017-05-17 09:29:02,473 DEBG 'start-script' stdout output: [info] VPN default certs defined, copying to /config/openvpn/... 2017-05-17 09:29:02,479 DEBG 'start-script' stdout output: [debug] Environment variables defined as follows BASH=/bin/bash BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="0") BASH_SOURCE=([0]="/root/start.sh") BASH_VERSINFO=([0]="4" [1]="4" [2]="12" [3]="1" [4]="release" [5]="x86_64-unknown-linux-gnu") BASH_VERSION='4.4.12(1)-release' DEBUG=true DIRSTACK=() ENABLE_PRIVOXY=on EUID=0 ) HOME=/home/nobody HOSTNAME=7b5d6c862ffe HOSTTYPE=x86_64 HOST_OS=unRAID IFS=$' \t\n' LANG=en_GB.UTF-8 LAN_NETWORK=192.168.1.0/24 MACHTYPE=x86_64-unknown-linux-gnu NAME_SERVERS=8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177 OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PGID=100 PIPESTATUS=([0]="0") PPID=7 2017-05-17 09:29:02,479 DEBG 'start-script' stdout output: PS4='+ ' PUID=99 PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:hashall:interactive-comments SHLVL=1 STRONG_CERTS=no SUPERVISOR_ENABLED=1 SUPERVISOR_GROUP_NAME=start-script SUPERVISOR_PROCESS_NAME=start-script TERM=xterm TZ=America/New_York UID=0 VPN_CONFIG=/config/openvpn/openvpn.ovpn VPN_DEVICE_TYPE=tun VPN_ENABLED=yes VPN_OPTIONS= VPN_PASS=********** VPN_PORT=1198 VPN_PROTOCOL=udp VPN_PROV=pia VPN_REMOTE=nl.privateinternetaccess.com VPN_USER=******** _='[debug] Environment variables defined as follows' exit_code_chmod=0 exit_code_chown=0 [debug] Directory listing of files in /config/openvpn as follows 2017-05-17 09:29:02,501 DEBG 'start-script' stdout output: total 16 drwxrwxrwx 1 nobody users 97 May 17 09:15 . drwxrwxr-x 1 nobody users 98 May 16 15:40 .. -rwxrwxrwx 1 nobody users 2025 May 17 09:29 ca.rsa.2048.crt -rwxrwxrwx 1 nobody users 20 May 17 09:15 credentials.conf -rwxrwxrwx 1 nobody users 869 May 17 09:29 crl.rsa.2048.pem -rwxrwxrwx 1 nobody users 272 May 17 09:29 openvpn.ovpn 2017-05-17 09:29:02,502 DEBG 'start-script' stdout output: [info] VPN config file (ovpn extension) is located at /config/openvpn/openvpn.ovpn 2017-05-17 09:29:02,656 DEBG 'start-script' stderr output: dos2unix: converting file /config/openvpn/openvpn.ovpn to Unix format... 2017-05-17 09:29:02,728 DEBG 'start-script' stdout output: [debug] Contents of ovpn file /config/openvpn/openvpn.ovpn as follows... 2017-05-17 09:29:02,729 DEBG 'start-script' stdout output: client dev tun p remote nl.privateinternetaccess.com 1198 resolv-retry infinite nobind persist-key cipher aes-128-cbc 1 tls-client remote-cert-tls server auth-user-pass credentials.conf comp-lzo verb 1 crl-verify crl.rsa.2048.pem ca ca.rsa.2048.crt disable-occ 2017-05-17 09:29:02,736 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2017-05-17 09:29:02,741 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2017-05-17 09:29:02,746 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2017-05-17 09:29:02,751 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2017-05-17 09:29:02,756 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf [debug] Show name servers defined for container 2017-05-17 09:29:02,757 DEBG 'start-script' stdout output: nameserver 8.8.8.8 nameserver 37.235.1.174 nameserver 8.8.4.4 nameserver 37.235.1.177 2017-05-17 09:29:02,758 DEBG 'start-script' stdout output: [debug] Show name resolution for VPN endpoint nl.privateinternetaccess.com 2017-05-17 09:29:02,974 DEBG 'start-script' stdout output: ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 47891 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; nl.privateinternetaccess.com. IN A ;; ANSWER SECTION: nl.privateinternetaccess.com. 300 IN A 46.166.188.214 nl.privateinternetaccess.com. 300 IN A 46.166.188.225 nl.privateinternetaccess.com. 300 IN A 46.166.138.130 nl.privateinternetaccess.com. 300 IN A 46.166.186.234 nl.privateinternetaccess.com. 300 IN A 46.166.138.135 nl.privateinternetaccess.com. 300 IN A 46.166.137.234 nl.privateinternetaccess.com. 300 IN A 46.166.138.164 nl.privateinternetaccess.com. 300 IN A 46.166.188.244 nl.privateinternetaccess.com. 300 IN A 46.166.188.199 nl.privateinternetaccess.com. 300 IN A 46.166.190.229 nl.privateinternetaccess.com. 300 IN A 46.166.190.189 nl.privateinternetaccess.com. 300 IN A 46.166.138.156 nl.privateinternetaccess.com. 300 IN A 46.166.186.238 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 148 msec ;; SERVER: 37.235.1.177 ;; WHEN: Wed May 17 09:29:02 2017 ;; MSG SIZE rcvd: 254 2017-05-17 09:29:02,987 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2017-05-17 09:29:02,988 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2017-05-17 09:29:02,989 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2 192.168.1.0/24 via 172.17.0.1 dev eth0 2017-05-17 09:29:02,989 DEBG 'start-script' stdout output: -------------------- [debug] Modules currently loaded for kernel 2017-05-17 09:29:02,993 DEBG 'start-script' stdout output: Module Size Used by xt_nat 1913 18 veth 4966 0 iptable_filter 1706 3 ipt_MASQUERADE 1277 20 nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE iptable_nat 1897 1 nf_conntrack_ipv4 5874 2 nf_nat_ipv4 4199 1 iptable_nat nf_nat 11145 3 xt_nat,nf_nat_masquerade_ipv4,nf_nat_ipv4 md_mod 36572 4 iptable_mangle 1658 1 ip_tables 9853 3 iptable_mangle,iptable_filter,iptable_nat tun 19304 2 bonding 92464 0 igb 128723 0 ptp 9308 1 igb pps_core 5928 1 ptp i2c_algo_bit 4752 1 igb coretemp 5340 0 kvm_intel 160423 0 kvm 289582 1 kvm_intel mpt3sas 168061 5 ahci 26326 0 i2c_i801 11888 0 raid_class 3380 1 mpt3sas libahci 19716 1 ahci i2c_smbus 3041 1 i2c_i801 scsi_transport_sas 21714 1 mpt3sas pata_jmicron 2627 0 i5500_temp 2561 0 i2c_core 20390 4 i2c_algo_bit,igb,i2c_i801,i2c_smbus acpi_cpufreq 7054 1 2017-05-17 09:29:03,003 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2017-05-17 09:29:03,012 DEBG 'start-script' stdout output: [debug] Docker interface defined as eth0 2017-05-17 09:29:03,017 DEBG 'start-script' stdout output: [debug] Docker IP defined as 172.17.0.2 2017-05-17 09:29:03,023 DEBG 'start-script' stdout output: [debug] Docker netmask defined as 255.255.0.0 2017-05-17 09:29:03,036 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2017-05-17 09:29:03,127 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2017-05-17 09:29:03,129 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT -A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2017-05-17 09:29:03,130 DEBG 'start-script' stdout output: -------------------- 2017-05-17 09:29:03,130 DEBG 'start-script' stdout output: [debug] OpenVPN command line '/usr/bin/openvpn --cd /config/openvpn --config /config/openvpn/openvpn.ovpn --daemon --dev tun0 --remote nl.privateinternetaccess.com 1198 --proto udp --reneg-sec 0 --mute-replay-warnings --auth-nocache --keepalive 10 60 --setenv VPN_PROV pia --script-security 2 --up /root/openvpnup.sh --up-delay --up-restart --auth-user-pass credentials.conf --disable-occ --log-append /config/supervisord.log' [info] Starting OpenVPN... 2017-05-17 09:29:03,155 DEBG 'start-script' stdout output: [info] OpenVPN started 2017-05-17 09:29:03,155 DEBG 'start-script' stdout output: [debug] Waiting for valid IP address from tunnel...

Hi just checking in to corroborate. I'm in the same boat as seanwill2. Haven't had my requests show for ~ 3 days, and nothing I've tried (which was mainly alot of nuking) worked. The issues seemed to start with :25, so I'm now using :24 and I can see my requests again.

Well, I feel stupid, never done that before, but it definitely worked.

I'm fairly certain that in TUN mode, it's layer 3 (which was what I used) I've never tried to access the shares via IP before. I can still get into the webgui, though.

Hello, I can't access my shares via windows explorer when I'm connected via openvpn on my server. I used to have openvpn at the router level, so connecting to that granted me access to all the shared devices on my lan, but I cant see that with this plugin. Oddly enough, I can see one computer in the 'network' section of explorer, but none of the shares on my unraid server.

I'm now running into a similar problem. I can't access my webui when "Enable_VPN" is set to "yes", but I can if I set it to "no".

Hello, when connect to my server remotely through openvp (using peter_sm's openvpn TUN server plugin), I can't access the webui of this DelugeVPN. Is it possible to both be using the openvpn server hosted on my machine and access DelugeVPN?.

I just forced an update twice, the libtorrent error is gone, but still no WebUI. Here's my docker log And heres the deluge log I've also deleted my old image, and created a new container with fresh configs, and still have the same issue. Fixed it, not sure what was wrong, but the webui is back after I manually removed the container, image, configs and all orphaned images. Adding the old torrents back with the states folder was easy, too.

Here's my log file after a start up (there are more torrents than this, I just removed them for the sake of size) deluged2.log

Hello, Deluge has stopped working for me. I can no-longer reach the WebUi. 2017-03-06 08:10:06.146290 [info] Starting Supervisor... 2017-03-06 08:10:06,701 CRIT Set uid to user 0 2017-03-06 08:10:06,701 INFO Included extra file "/etc/supervisor/conf.d/deluge.conf" during parsing 2017-03-06 08:10:06,706 INFO supervisord started with pid 7 2017-03-06 08:10:07,709 INFO spawned: 'deluge-script' with pid 39 2017-03-06 08:10:07,711 INFO spawned: 'deluge-web-script' with pid 40 2017-03-06 08:10:07,722 DEBG 'deluge-script' stdout output: [info] Deluge config file already exists, skipping copy [info] Starting Deluge daemon... 2017-03-06 08:10:07,723 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-03-06 08:10:07,723 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-03-06 08:10:08,478 DEBG 'deluge-script' stderr output: /usr/lib/python2.7/site-packages/deluge/_libtorrent.py:59: RuntimeWarning: to-Python converter for boost::shared_ptr<libtorrent::alert> already registered; second conversion method ignored. import libtorrent as lt I do have 2 deluge dockers (this one, and your DelugeVPN one). I'm not sure if that'd affect this at all given the recent updates I've had, but for the last few months they've both been running with no issues.

Hello, does anyone know why my transmission isn't seeding? I have already forwarded my Peer Listening Port and transmission reports it as open, but all of my torrents are showing "seeding to 0 of 0 peers" even though all of the private trackers I get my torrents from are reporting atleast 50 peers per torrent.

Is there anyway to fix deluge crashing when I try to remove multiple torrents? I have about 170 I need to get rid of, but If I select 10 or more I lose connection to the web server and once it comes back up, very few (1-5) or sometimes none of the torrents are removed.

Hi, all. I also had an issue pulling new images when I updated. **I fixed it by completely deleting my docker file, re-creating it and re-installing my dockers from my saved templates.**

Hi thanks did that and i can pull the docker image down now. I installed it last night and works fine. However i am getting the update message again this morning. I update it then when i check for updates again it says it needs updating? @naturalcarr are you getting update messages since your reinstall? Yeah I still get it when I mount my array, but that's it, so as long as my server and docker are on and enabled, it's not an issue. Sent from my SM-N910T using Tapatalk

;D Just writing to say 1.7.0 is a success, everything is working perfectly.

That seems like a typo /usr/loval/emhttp/. Should read /usr/local/emhttp/ Mybad, it was local, (I was typing that from a KVM console, not a copy/paste). I'm also still getting exit error 23.

I updated to 1.5.2 but now I can't calculate the moves. unBalance is showing 0 bytes across the board for my drives and shows what you see in the attached image. Also, I never noticed it before, but my server's console shows this after boot: /bin/bash: line3: /usr/loval/emhttp/plugins/unbalance/scripts/stop : No such file or directory found EDIT: Attaching my log. unbalance.zip

Update I deleted my docker file, re-created it and re-pulled DelugeVPN (using my saved templace so I didn't lose any settings) successfully, this also fixed the "Update button always being there. So try that, delete your docker file, re-create it and re-pull your dockers.

I was running on 6.2-Beta21 fine also, but the question is can you pull the docker from BinHex's repository on 6.2?

Maybe it has to do with the 6.2 beta? Which version of unRaid are you running? (I'm really just grasping straws here). Sent from my SM-N910T using Tapatalk

Hi, all. I just tried to re-download DelugeVPN and I'm getting this when unraid tries to install the docker: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="binhex-delugevpn" --net="bridge" --privileged="true" -e TZ="America/Earth" -e HOST_OS="unRAID" -e "VPN_ENABLED"="yes" -e "VPN_USER"="TookThisOut" -e "VPN_PASS"="TookThisOutToo" -e "VPN_REMOTE"="nl.privateinternetaccess.com" -e "VPN_PORT"="1194" -e "VPN_PROTOCOL"="udp" -e "VPN_PROV"="pia" -e "ENABLE_PRIVOXY"="no" -e "LAN_NETWORK"="192.168.1.0/24" -e "DEBUG"="false" -e "PUID"="99" -e "PGID"="100" -p 8112:8112/tcp -p 58846:58846/tcp -p 8118:8118/tcp -v "/mnt/user/addonfiles/dockers/delugevpn/config":"/config":rw -v "/mnt/user/Files/Downloads/Torrents/deluge/":"/data":rw -v "/mnt/user/Files/Media/Videos/Movies/":"/CompletedMovies":rw -v "/mnt/user/Files/Media/Videos/Shows/":"/CompletedShows":rw binhex/arch-delugevpn Unable to find image 'binhex/arch-delugevpn:latest' locally latest: Pulling from binhex/arch-delugevpn a3ed95caeb02: Already exists af2bff008299: Already exists a3ed95caeb02: Already exists 3d8de81ecefc: Already exists 8fd4090c821b: Already exists a3ed95caeb02: Already exists a3ed95caeb02: Already exists a3ed95caeb02: Already exists fbc488e73d97: Already exists 136af2acfbfa: Pulling fs layer e87355edd5cd: Pulling fs layer eab10fbc41a3: Pulling fs layer 4982d59cf7d7: Pulling fs layer e4707c851f55: Pulling fs layer baa9d87d8d71: Pulling fs layer 9d2fa6591ebb: Pulling fs layer 2dbfcd5304ec: Pulling fs layer af646dc4ce1f: Pulling fs layer 58eab22145fe: Pulling fs layer 51afa166eaf9: Pulling fs layer 9d2fa6591ebb: Waiting 2dbfcd5304ec: Waiting 4982d59cf7d7: Waiting e4707c851f55: Waiting af646dc4ce1f: Waiting 58eab22145fe: Waiting baa9d87d8d71: Waiting 51afa166eaf9: Waiting 136af2acfbfa: Verifying Checksum eab10fbc41a3: Download complete e87355edd5cd: Verifying Checksum e87355edd5cd: Download complete 4982d59cf7d7: Verifying Checksum 4982d59cf7d7: Download complete baa9d87d8d71: Verifying Checksum baa9d87d8d71: Download complete 9d2fa6591ebb: Verifying Checksum 9d2fa6591ebb: Download complete 2dbfcd5304ec: Verifying Checksum 2dbfcd5304ec: Download complete e4707c851f55: Verifying Checksum e4707c851f55: Download complete af646dc4ce1f: Download complete 58eab22145fe: Verifying Checksum 58eab22145fe: Download complete 136af2acfbfa: Pull complete 136af2acfbfa: Pull complete e87355edd5cd: Pull complete e87355edd5cd: Pull complete eab10fbc41a3: Pull complete eab10fbc41a3: Pull complete 4982d59cf7d7: Pull complete 4982d59cf7d7: Pull complete e4707c851f55: Pull complete e4707c851f55: Pull complete baa9d87d8d71: Pull complete baa9d87d8d71: Pull complete 9d2fa6591ebb: Pull complete 9d2fa6591ebb: Pull complete 2dbfcd5304ec: Pull complete 2dbfcd5304ec: Pull complete af646dc4ce1f: Pull complete af646dc4ce1f: Pull complete 58eab22145fe: Pull complete 58eab22145fe: Pull complete 51afa166eaf9: Verifying Checksum 51afa166eaf9: Download complete 51afa166eaf9: Pull complete 51afa166eaf9: Pull complete docker: layers from manifest don't match image configuration. See '/usr/bin/docker run --help'. The command failed.