Stuke00

That’s interesting. I do use Samba for my tdarr nodes. Never been an issue until recently. Also I have 32GB of RAM and the most I’ve hit is 76% usage. Could be a ZFS thing?

Every other day I have to reboot my unraid server because user shares say "There are no exportable user shares" Not sure what is causing it. I've attached diagnostics. unraid-diagnostics-20240413-0606.zip

I have this installed and setup for my camera. I have "continuously record" enabled but nothing gets recorded. Is there something I am missing?

It seems when I stop Plex, it ends. I had to walk my wife through restarting Plex twice in my 30 min drive to work today. I am not sure what Plex is doing to cause this. I am not really seeing anything in the logs (or I don't know what I am looking for). I have my downloads set to only occur at night, and Plex only updates the library during maintenance which is from 12am to 6am.

I'm not sure I understand? Should I upgrade my unRAID version? I am running 6.3.5 currently.

I am not sure what is happening. I am not too savvy when it comes to linux. I just have a handful of dockers running. Crashplan, Jackett, Netdata, NZBGet, plex, plexpy, radarr, sonarr and transmission. My downloads are set to run from 10pm - 6am. But today at about 4:20pm central, my wife told me that Plex as not being responsive. This happens very frequently. I log in and do an iotop and this is what I see http://imgur.com/a/1mvnr LOTS and LOTS of ioactivity. I have upgraded my cache drive TWICE and this keeps happening. Any insight from my screenshot on what is causing it?

I did that last night and let it run. Still got "postgres: could not access the server configuration file "/config/postgresql.conf": No such file or directory" but I restarted the docker again and it appears to be fine now. Thanks again

Okay thanks, I'll clear the directories again and leave the docker off until then. Thanks for your help!!!

Okay thanks, I just tried what you previously suggested and ended up with the same issue. Here is the full log after startup Brought to you by linuxserver.io We gratefully accept donations at: https://www.linuxserver.io/donations/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-brainzcode: executing... [cont-init.d] 20-brainzcode: exited 0. [cont-init.d] 30-initialise-database: executing... fetching latest dump from musicbrainz, if this section fails try again later as musicbrainz dump may not be fully uploaded to their site % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed initialising empty databases completed postgres initialise waiting for server to start....LOG: could not create IPv6 socket: Address family not supported by protocol FATAL: could not create lock file "/run/postgresql/.s.PGSQL.5432.lock": No such file or directory LOG: database system is shut down pg_ctl: could not start server Examine the log output. stopped waiting [cont-init.d] 30-initialise-database: exited 1. [cont-init.d] 35-generate_css: executing... fatal: Not a git repository (or any of the parent directories): .git fatal: Not a git repository (or any of the parent directories): .git fatal: Not a git repository (or any of the parent directories): .git [21:07:50] Using gulpfile /app/musicbrainz/gulpfile.js [21:07:50] Starting 'default'... [21:08:04] Finished 'default' after 14 s [cont-init.d] 35-generate_css: exited 0. [cont-init.d] 40-config: executing... [cont-init.d] 40-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. postgres: could not access the server configuration file "/config/postgresql.conf": No such file or directory postgres: could not access the server configuration file "/config/postgresql.conf": No such file or directory postgres: could not access the server configuration file "/config/postgresql.conf": No such file or directory

Brand new install and I am getting this error postgres: could not access the server configuration file "/config/postgresql.conf": No such file or directory I have my /config pointed to /mnt/cache/appdata/musicbrainz/config and /data pointed to /mnt/cache/appdata/musicbrainz/data I also addedin the WEBADDRESS variable to my unraid server IP address. Any idea what this error is or how to fix it? When I browse /mnt/cache/musicbrainz I do not see a postgresql.conf file.

Having an issue with the System Stats plugin. I have version 2016.11.03 - The network system stats is not accurate. It will occasionally show a single spike that is so extreme I can't see the rest of the statistics. There is no way I am sending at over 120Gb/sec

ok that is good to know. Been trying to troubleshoot some remote plex buffering issues so that was the first place I started.

Any ideas why this seems to report extremely low speeds for me? I am on AT&T fiber and have 1GB up and down but this is my result I can send things using resilio sync faster than this, so I know it is not accurate. Is there anything I need to change to get a more accurate result?

I disabled those when I setup the server, and they are still disabled. I even have it set to run scanner tasks at a lower priority. Is there a way to see what files exactly are being accessed during this time of high activity? If you look at the screenshot, it is doing a read... and with it being over 256MB/sec, it has to be the cache SSD drive and not my slower drives where the media is stored. Even after adding music this happens.

Are you sure about that path? I suspect it's a typo but do you mean /mnt/cache/appdata (which is actually equivalent to /mnt/user/appdata since appdata is a cache-only share)? Your diagnostics (Tools -> Diagnostics) would shed more light on your question. If instead you have it set to /mnt/user/cache/appdata like you said, then you have accidentally created a user share named "cache" with a folder named appdata in it. That share will have the default setting of cache-no, so it is on your array. Ah sorry, I had a typo. It is /mnt/user/appdata. I try to do everything to the user share and let the share control which disk gets used.

I am trying to figure out why this happens, but whenever Plex does a scan it will max out the read capabilities of my cache drive and the entire system will become unresponsive. I have a SSD setup as my cache drive, and all my dockers get installed to /mnt/user/appdata. The appdata share is set to cache only, which is the SSD. So because Plex is maxing out the Read of that drive, none of my other dockers will respond, including Plex itself. See screenshots. - How do I stop this from happening?

I applied the extra settings from that thread but the issue still remains.

I am having an issue I am trying to figure out. I have an SMB Share from UNRAID set to "Private" and with my user that I created set to "read/write". I have mapped this share to my Windows box using that same user/password. I get access denied anytime I try and create a file on the share. If I set my user to "no access" I immediately see the share disappear from windows. But "read/write" is not letting me actually write files. Permissions for that folder on the server are set to drwxr-xr-x. Any ideas on what my issue is?

In CouchPotato, there is a setting to wait for release before searching. Recently, movies are getting released 2-3 weeks early on Digital before DVD or Bluray. Is there a way or could a feature be added to have CouchPotato search on the Digital release date instead of the DVD/Bluray?

After the Plex container updates, I am finding that Plex isn't loading. The logs show this: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... and it just sits there. I have to manually stop it and start it back up for it to load.

Hmm... maybe. But even my non linuxserver.io ones do it as well.

Yes, I deleted it when I reinstalled unRAID. Formatted flash drive, redownloaded unRAID to it, setup a new docker.img as well. Attached diagnostics. tower-diagnostics-20161102-1845.zip

Ever since upgrading to 6.2, all my dockers say they need to be updated every time I stop and start the array. I even completely reinstalled unRAID, added all dockers and pointed them all back to my /appdata directory. Any idea why this is happening?

oh cool thanks that worked. Last time I tried that I had issues.

Sonarr is telling me there is an update. I used to be able to just restart the docker and it would update. This does not seem to be working anymore.