jedimstr

NZBGet v 18.0 is out now with a ton of new features/optimizations, especially for those of us with a high core/thread count. Can we get an update to the Nzbgetvpn container with the latest NZBGet?

I second this... been trying to setup Snort/PulledPork/Barnyard2/Snorby on a separate ubuntu server, but I'd much prefer having them in containers on unRAID (either separate or bundled together as a IDS container). Since the InstaSnorby ISO is basically a dead project, I'm now looking at using the Security Onion ISO in a VM on unRAID instead with Snorby.

Don't know if anyone else is experiencing this, but with the latest version of Chrome (Version 56.0.2924.87 (64-bit)) and the Ignore X-Frame headers extension active, MuxiMux slows to a crawl after a few minutes idle to the point where any frame or window you're loading through MuxiMux becomes unusable. Used to be fine on Chrome 55 and below. Loading those container web views and UI (like unRAID webGUI) outside of MuxiMux is fine. It's only when using MuxiMux where things crap out. Barring any fixes to MuxiMux, are there any viable alternative containers or plugins available that don't have this issue (or the security hole caused by using Ignore X-Frame)? Do HTPC Manager or Marschino work similarly without the performance or framing/security issues?

1) ¯\_( )_/¯ 2) Drop a PNG logo here: /usr/local/emhttp/webGui/icons

Ditto... great update and thanks for being so responsive! https://www.wpclipart.com/signs_symbol/gesture_mood/thumb/thumbs_up_through_wall_T.png[/img]

Damn you guys are fast... busy copying and pasting, and then refreshed the thread....nevermind. So yeah, confirming that the latest update fixed it for me as well.

Pulled latest, still down on initial startup. Waiting the 10 minutes to see if it pops up. I'll post the new debug log after that duration.

So after resetting to Latest again with the new variables, I do get webUI access after 10 minutes. Probably too late since you found something, but here's some additional data if it helps: docker exec -it activ-transmissionvpn ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.17.0.13 netmask 255.255.0.0 broadcast 0.0.0.0 ether 02:42:ac:11:00:0d txqueuelen 0 (Ethernet) RX packets 783 bytes 112443 (109.8 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 368 bytes 61218 (59.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 loop txqueuelen 1 (Local Loopback) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.55.10.6 netmask 255.255.255.255 destination 10.55.10.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 29 bytes 6790 (6.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 188 bytes 29768 (29.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 docker exec -it activ-transmissionvpn ps -A PID TTY TIME CMD 1 ? 00:00:00 tini 16 ? 00:00:00 bash 24 ? 00:00:00 supervisord 27 ? 00:00:01 checkproc.sh 28 ? 00:00:00 start.sh 29 ? 00:00:00 transmission.sh 30 ? 00:00:00 privoxy.sh 56 ? 00:00:00 privoxy 164 ? 00:00:00 openvpn 420 ? 00:00:00 sleep 19110 ? 00:00:00 sleep 19147 ? 00:00:00 ps 19161 ? 00:00:00 checkproc.sh 19162 ? 00:00:00 netstat 19163 ? 00:00:00 checkproc.sh unRAID Docker debug log (usernames/pass blanked): usermod: no changes [info] Env var PUID defined as 99 [info] Env var PGID defined as 100 [info] Permissions already set for /config [info] Starting Supervisor... 2017-01-29 08:32:16,130 CRIT Set uid to user 0 2017-01-29 08:32:16,130 INFO Included extra file "/etc/supervisor/conf.d/transmission.conf" during parsing 2017-01-29 08:32:16,134 INFO supervisord started with pid 24 2017-01-29 08:32:17,136 INFO spawned: 'checkproc-script' with pid 27 2017-01-29 08:32:17,137 INFO spawned: 'start-script' with pid 28 2017-01-29 08:32:17,139 INFO spawned: 'transmission-script' with pid 29 2017-01-29 08:32:17,140 INFO spawned: 'privoxy-script' with pid 30 2017-01-29 08:32:17,146 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2017-01-29 08:32:17,146 INFO success: checkproc-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-01-29 08:32:17,146 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-01-29 08:32:17,146 INFO success: transmission-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-01-29 08:32:17,146 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2017-01-29 08:32:17,147 DEBG 'transmission-script' stdout output: [info] VPN is enabled, checking VPN tunnel local ip is valid 2017-01-29 08:32:17,151 DEBG 'privoxy-script' stderr output: /home/nobody/privoxy.sh: line 7: /home/nobody/checkip.sh: No such file or directory 2017-01-29 08:32:17,151 DEBG 'privoxy-script' stdout output: [info] Configuring Privoxy... 2017-01-29 08:32:17,161 DEBG 'start-script' stdout output: [info] VPN strong certs defined, copying to /config/openvpn/... 2017-01-29 08:32:17,165 DEBG 'start-script' stdout output: [debug] Environment variables defined as follows BASH=/bin/bash BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="0") BASH_SOURCE=([0]="/root/start.sh") BASH_VERSINFO=([0]="4" [1]="4" [2]="5" [3]="1" [4]="release" [5]="x86_64-unknown-linux-gnu") BASH_VERSION='4.4.5(1)-release' DEBUG=true DIRSTACK=() ENABLE_PRIVOXY=yes EUID=0 ) HOME=/home/nobody HOSTNAME=039aa96c109c HOSTTYPE=x86_64 HOST_OS=unRAID IFS=$' \t\n' LANG=en_GB.UTF-8 LAN_NETWORK=172.22.1.0/24 MACHTYPE=x86_64-unknown-linux-gnu NAME_SERVERS=8.8.8.8,8.8.4.4 OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PGID=100 PHP_TZ=America/New_York PIPESTATUS=([0]="0") PPID=24 PS4='+ ' PUID=99 PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:hashall:interactive-comments SHLVL=2 STRONG_CERTS=yes SUPERVISOR_ENABLED=1 SUPERVISOR_GROUP_NAME=start-script SUPERVISOR_PROCESS_NAME=start-script TERM=xterm TZ=America/New_York UID=0 VPN_CONFIG=/config/openvpn/openvpn.ovpn VPN_DEVICE_TYPE=tun VPN_ENABLED=yes VPN_PASS=BLANKED VPN_PORT=1194 VPN_PROTOCOL=udp VPN_PROV=pia VPN_REMOTE=ca-toronto.privateinternetaccess.com VPN_USER=BLANKED WHITELIST='172.22.*.*,172.17.*.*' _='[debug] Environment variables defined as follows' exit_code_chmod=0 exit_code_chown=0 [debug] Directory listing of files in /config/openvpn as follows 2017-01-29 08:32:17,192 DEBG 'privoxy-script' stdout output: [info] All checks complete, starting Privoxy... 2017-01-29 08:32:17,721 DEBG 'privoxy-script' stderr output: 2017-01-29 08:32:17.720 2b5e6c070e00 Info: Privoxy version 3.0.26 2017-01-29 08:32:17.720 2b5e6c070e00 Info: Program name: /usr/bin/privoxy 2017-01-29 08:32:17,725 DEBG 'start-script' stdout output: total 12 drwxrwxrwx 1 nobody users 86 Jan 29 08:32 . drwxrwxr-x 1 nobody users 306 Jan 29 07:35 .. -rwxr-xr-x 1 root root 2719 Jan 29 08:32 ca.rsa.4096.crt -rwxr-xr-x 1 root root 1214 Jan 29 08:32 crl.rsa.4096.pem -rwxr-xr-x 1 root root 215 Jan 29 08:32 openvpn.ovpn 2017-01-29 08:32:17,725 DEBG 'start-script' stdout output: [debug] Contents of ovpn file /config/openvpn/openvpn.ovpn as follows... 2017-01-29 08:32:17,726 DEBG 'start-script' stdout output: client resolv-retry infinite nobind persist-key cipher aes-256-cbc auth sha256 tls-client remote-cert-tls server auth-user-pass comp-lzo verb 1 reneg-sec 0 crl-verify crl.rsa.4096.pem ca ca.rsa.4096.crt disable-occ 2017-01-29 08:32:17,727 DEBG 'start-script' stdout output: [info] VPN config file (ovpn extension) is located at /config/openvpn/openvpn.ovpn 2017-01-29 08:32:17,729 DEBG 'start-script' stdout output: [warn] VPN provider remote port incorrect, overriding to 1197 2017-01-29 08:32:17,764 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2017-01-29 08:32:17,768 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2017-01-29 08:32:17,773 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2017-01-29 08:32:17,773 DEBG 'start-script' stdout output: [debug] Show name servers defined for container 2017-01-29 08:32:17,774 DEBG 'start-script' stdout output: nameserver 8.8.8.8 nameserver 8.8.4.4 2017-01-29 08:32:17,774 DEBG 'start-script' stdout output: [debug] Show name resolution for VPN endpoint ca-toronto.privateinternetaccess.com 2017-01-29 08:32:17,797 DEBG 'start-script' stdout output: ;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 32812 ;; flags: qr rd ra ; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;; ca-toronto.privateinternetaccess.com. IN A ;; ANSWER SECTION: ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.120 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.96 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.134 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.73 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.9 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.68 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.82 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.83 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.92 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.87 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.53 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.125 ca-toronto.privateinternetaccess.com. 200 IN A 172.98.67.14 ;; AUTHORITY SECTION: ;; ADDITIONAL SECTION: ;; Query time: 20 msec ;; SERVER: 8.8.8.8 ;; WHEN: Sun Jan 29 08:32:17 2017 ;; MSG SIZE rcvd: 262 2017-01-29 08:32:17,798 DEBG 'start-script' stdout output: [info] Adding 172.22.1.0/24 as route via docker eth0 2017-01-29 08:32:17,799 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2017-01-29 08:32:17,800 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.13 172.22.1.0/24 via 172.17.0.1 dev eth0 2017-01-29 08:32:17,800 DEBG 'start-script' stdout output: -------------------- 2017-01-29 08:32:17,803 DEBG 'start-script' stdout output: [debug] Modules currently loaded for kernel 2017-01-29 08:32:17,805 DEBG 'start-script' stdout output: Module Size Used by vhost_net 8037 1 vhost 13029 1 vhost_net macvtap 9551 1 vhost_net macvlan 11993 1 macvtap kvm_intel 142275 6 kvm 268324 1 kvm_intel md_mod 36275 11 bonding 90588 0 xt_CHECKSUM 1271 1 iptable_mangle 1592 2 ipt_REJECT 1457 2 nf_reject_ipv4 2419 1 ipt_REJECT ebtable_filter 1839 0 ebtables 14232 1 ebtable_filter tun 16556 6 vhost_net xt_nat 1849 21 veth 4665 0 ipt_MASQUERADE 1213 25 nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE iptable_nat 1831 1 nf_conntrack_ipv4 5810 3 nf_nat_ipv4 4327 1 iptable_nat iptable_filter 1528 2 ip_tables 9422 3 iptable_filter,iptable_mangle,iptable_nat nf_nat 9852 3 nf_nat_ipv4,xt_nat,nf_nat_masquerade_ipv4 ipmi_devintf 5176 0 ixgbe 211827 0 vxlan 23485 1 ixgbe udp_tunnel 2227 1 vxlan ptp 8988 1 ixgbe pps_core 5864 1 ptp x86_pkg_temp_thermal 4669 0 coretemp 5276 0 fbcon 33163 70 bitblit 4297 1 fbcon fbcon_rotate 1900 1 bitblit fbcon_ccw 4678 1 fbcon_rotate fbcon_ud 4741 1 fbcon_rotate fbcon_cw 4542 1 fbcon_rotate softcursor 1277 4 fbcon_cw,fbcon_ud,fbcon_ccw,bitblit font 7524 1 fbcon ast 40712 1 i2c_algo_bit 4624 1 ast drm_kms_helper 75196 1 ast cfbfillrect 3242 1 drm_kms_helper cfbimgblt 1983 1 drm_kms_helper cfbcopyarea 2942 1 drm_kms_helper ttm 60280 1 ast drm 216743 4 ast,ttm,drm_kms_helper agpgart 21186 2 drm,ttm syscopyarea 2878 1 drm_kms_helper sysfillrect 3114 1 drm_kms_helper sysimgblt 1983 1 drm_kms_helper fb_sys_fops 1314 1 drm_kms_helper i2c_i801 10759 0 fb 29368 7 fbcon,fbcon_cw,fbcon_ud,drm_kms_helper,softcursor,fbcon_ccw,bitblit i2c_core 18064 5 ast,drm,i2c_i801,drm_kms_helper,i2c_algo_bit ahci 26003 8 fbdev 966 2 fb,fbcon aacraid 97643 11 libahci 19067 1 ahci wmi 6754 0 ipmi_si 36527 0 2017-01-29 08:32:17,806 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2017-01-29 08:32:17,844 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2017-01-29 08:32:17,845 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1197 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9091 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9091 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8118 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8118 -j ACCEPT -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1197 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9091 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9091 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8118 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8118 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2017-01-29 08:32:17,846 DEBG 'start-script' stdout output: -------------------- 2017-01-29 08:32:17,847 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2017-01-29 08:32:17,860 DEBG 'start-script' stdout output: [info] OpenVPN started 2017-01-29 08:32:19,456 DEBG 'transmission-script' stdout output: [info] transmission not running [info] transmission listening interface IP 0.0.0.0 and VPN provider IP 10.55.10.6 different, marking for reconfigure 2017-01-29 08:32:21,053 DEBG 'transmission-script' stdout output: [info] Attempting to start transmission... [info] Removing any transmission session lock files left over from the previous run... 2017-01-29 08:32:21,057 DEBG 'transmission-script' stdout output: Script started, file is /home/nobody/typescript 2017-01-29 08:32:21,079 DEBG 'transmission-script' stdout output: Script done, file is /home/nobody/typescript 2017-01-29 08:32:21,080 DEBG 'transmission-script' stdout output: [info] transmission started [debug] VPN incoming port is 30146 [debug] VPN IP is 10.55.10.6 [debug] transmission incoming port is 30146 [debug] transmissionn IP is 10.55.10.6 2017-01-29 08:42:21,201 DEBG 'transmission-script' stdout output: [info] transmission not running 2017-01-29 08:42:21,830 DEBG 'transmission-script' stdout output: [info] Attempting to start transmission... [info] Removing any transmission session lock files left over from the previous run... 2017-01-29 08:42:21,832 DEBG 'transmission-script' stdout output: Script started, file is /home/nobody/typescript 2017-01-29 08:42:21,848 DEBG 'transmission-script' stdout output: Script done, file is /home/nobody/typescript 2017-01-29 08:42:21,848 DEBG 'transmission-script' stdout output: [info] transmission started [debug] VPN incoming port is 30146 [debug] VPN IP is 10.55.10.6 [debug] transmission incoming port is 30146 [debug] transmissionn IP is 10.55.10.6 Also just to confirm, the new variables since it's not clear on the Hub or here: Path: /etc/localtime STRONG_CERTS NAME_SERVERS PHP_TZ VPN_DEVICE_TYPE Instead of cap-add=NET_ADMIN I'm running with --privileged.

Yup, and pointed to the Toronto node: ca-toronto.privateinternetaccess.com Could you do the same checks Nexusmaniac has done? I'm thinking this has something to do with the PIA specific part of the code. (Maybe your is also working after waiting 10 minutes) Do you want me to try with Latest again or on the 1.0 tag? 1.0 is still dead after more than 15min since last restart.

Yup, and pointed to the Toronto node: ca-toronto.privateinternetaccess.com

Just to confirm, both the latest update and the 1.0 tag is not working (1.0 tag with and without new set of variables) regardless of unRAID version. I'm on the public release 6.2.4 and TransmissionVPN only stopped working today on update. Adding the new variables hasn't fixed anything and using the 1.0 tag with and without the new variables had no effect. I'm going to try re-adding it from scratch, but the unRAID version is probably a red-herring.

That one works for me too!!! Thanks All! Now to go download some Linux ISOs.

I am using PIA, specifically the NY node. I'll have to see if it allows incoming. Are there any PIA endpoints with incoming connections in the US... or at least reasonably close? I tried the PIA network speedtest on Germany and Netherlands and it was super slow compared to my primary connection nodes.

I'm having an issue with getting any peers to connect. I can connect to WebUI fine and Tracker connections seem fine. The checkMyTorrentIp test torrent works fine as well showing a different IP than my ISP. But any torrent with known seeders is always showing 0 peers. Same torrents on my old non VPN Linuxserver.io based transmission container (not active at the same time of course) shows peer connections and downloads. I know with the vpn connection I don't have to worry about the port I forward for the other transmission container, but I tried setting it anyway. Still same 0 peers. Since the checkMyTorrentIp connects with an expected IP response and the Tracker connections seem fine, I'm assuming the VPN connection is working. Any ideas?

A few months and a year on and still nothing on this request? A FreeRADIUS container would be great. FreeRADIUS with Ara for the webUI would be even better. Maybe something based on https://github.com/catatnight/docker-freeradius and https://hub.docker.com/r/catatnight/ara/ from the LinuxServer.io crew and repackaged for Community Applications.

As an alternative if you just want to see what the mover is doing without % and know exactly when complete, you can hit the Log button in the navigation while Mover is running. That shows you exactly what it's doing and when done.

1. Thanks that worked nicely: 2. Some variables work if you hardcode in your values as "default". Just can't save different values. Also I took out the channel field since you can set that up on the Slack WebHook Custom Integration side. With default hardcoded values for the webhook URL, it's working nicely:

Challenge Accepted: <Agent> <Name>Slack</Name> <Variables> <Variable Help="Get your WebHook as explained [a href='https://api.slack.com/incoming-webhooks' target='_blank'][u]here[/u].[/a]" Desc="WebHook URL" Default="FILL WITH YOUR OWN">WEBH_URL</Variable> <Variable Help="Application name, e.g., unRAID Server." Desc="Application Name" Default="unRAID Server">APP_NAME</Variable> <Variable Help="Specify the fields which are included in the title of the notification." Desc="Notification Title" Default="$SUBJECT">TITLE</Variable> <Variable Help="Specify the fields which are included in the message body of the notification." Desc="Notification Message" Default="$DESCRIPTION">MESSAGE</Variable> </Variables> <Script> <![CDATA[ #!/bin/bash ############ {0} ############ TITLE=$(echo -e "$TITLE") MESSAGE=$(echo -e "$MESSAGE") curl -X POST -d "payload={\"username\": \"$APP_NAME\", \"text\": \"*$TITLE* \n $MESSAGE\"}" $WEBH_URL 2>&1 ]]> </Script> </Agent> This seems to work for Test, but has two issues: [*]No Icon and I don't see where to specify in the XML. [*]Won't save the variables for the WebHook URL and channel My assumption is that some handling code that ingests/transforms this XML defines the available variables and the icon. For the variables, next step is to reuse some of the unused ones like maybe APP_TOKEN and USER_KEY, but I'd rather use something that makes sense. But at least the Proof of Concept works. Ideal of course would be if LimeTech took this and ran with it. ADDENDUM: Nope, changing the new variables to reuse older unused variable names from other notifications doesn't let it save the settings. All works fine in test. I guess for now I'll have to either hardcode it or set the default values to my values (setting default to personal settings works).

And a bump... anyone have any word on this request? This is the one notifying thing I use that hasn't added Slack Notifications yet. If not an official method, what's the best way to hack the existing notifications system to feed to Slack via one of the other notification agent options?

If your query shows as a continuous upward slope on the graph, that means you'll need to use non_negative_derivative.

Version 2.0.0.4323 of Sonarr was released this weekend, but the Linuxserver.io repo doesn't have it yet. Any idea on when we'll get the update?

It would be great to have Slack support for notifications. Either using the tokenized App Web API or the Incoming Webhooks feature of Slack would be great! I'm already using plexPy, couchpotato, and sonarr Slack Notification integration, but it would great to have unRAID join the party.

The filtering functionality of the program is not currently working as I would like. The logic needs to be fixed for that. So for now it reports on all Libraries. - Ninthwalker Not quite "All Libraries". Right now with the Agent support limited to themoviedb, Freebase, and thetvdb.org you won't get Movie Libraries using the new default Plex Movie Agent and Anime Libraries using the popular HamaTV Agent. Would it be possible to add support for those two agents? Plex Movie still uses themoviedb for Cast List Source and Plot Summary, but allows more customization for Ratings Sources (plus it's the default if you upgrade to the latest Plex). Meanwhile HamaTV is the only way to get proper Anime episodes listings using Anidb as its source.

The single stat error that goes away on refresh or duration change is fixed in the latest Grafana update. Update your Container and it should fix this issue.

Currently the webUI Docker Container Advanced View has a field for entering Extra Parameters, but those are for Docker parameters in the run command before the Repository listing. Many containers have a need for container specific parameters after the Repository listing in the run command. You can add the parameters in the Repository listing itself, but according to the Fix Common Problems plugin this is deprecated ... As mentioned, using Extra Parameters places those parameters before the Repository, so isn't applicable to container specific parameters like what is needed for cadvisor Example Repository field for cadvisor google/cadvisor:latest -storage_driver=influxdb -storage_driver_host=tower:8086 Having an Advanced View field specifically for this use would be a cleaner way to do it.