karlpox

Aug 26 03:02:21 sobnology root: /mnt/cache: 1.3 TiB (1453279731712 bytes) trimmed on /dev/sdg1 Aug 26 04:57:47 sobnology kernel: ata6.00: READ LOG DMA EXT failed, trying PIO Aug 26 04:57:47 sobnology kernel: ata6.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0 Aug 26 04:57:47 sobnology kernel: ata6.00: irq_stat 0x40000008 Aug 26 04:57:47 sobnology kernel: ata6.00: failed command: READ FPDMA QUEUED Aug 26 04:57:47 sobnology kernel: ata6.00: cmd 60/78:88:20:b7:3f/03:00:04:00:00/40 tag 17 ncq dma 454656 in Aug 26 04:57:47 sobnology kernel: res 41/40:00:9c:b8:3f/00:00:04:00:00/00 Emask 0x409 (media error) <F> Aug 26 04:57:47 sobnology kernel: ata6.00: status: { DRDY ERR } Aug 26 04:57:47 sobnology kernel: ata6.00: error: { UNC } Aug 26 04:57:47 sobnology kernel: ata6.00: configured for UDMA/133 Aug 26 04:57:47 sobnology kernel: sd 6:0:0:0: [sdi] tag#17 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s Aug 26 04:57:47 sobnology kernel: sd 6:0:0:0: [sdi] tag#17 Sense Key : 0x3 [current] Aug 26 04:57:47 sobnology kernel: sd 6:0:0:0: [sdi] tag#17 ASC=0x11 ASCQ=0x4 Aug 26 04:57:47 sobnology kernel: sd 6:0:0:0: [sdi] tag#17 CDB: opcode=0x28 28 00 04 3f b7 20 00 03 78 00 Aug 26 04:57:47 sobnology kernel: blk_update_request: I/O error, dev sdi, sector 71284892 op 0x0:(READ) flags 0x80000 phys_seg 64 prio class 0 Aug 26 04:57:47 sobnology kernel: ata6: EH complete Aug 26 05:40:03 sobnology kernel: ata6.00: exception Emask 0x0 SAct 0x100000 SErr 0x0 action 0x0 Aug 26 05:40:03 sobnology kernel: ata6.00: irq_stat 0x40000008 Aug 26 05:40:03 sobnology kernel: ata6.00: failed command: READ FPDMA QUEUED Aug 26 05:40:03 sobnology kernel: ata6.00: cmd 60/00:a0:50:b2:3f/02:00:04:00:00/40 tag 20 ncq dma 262144 in Aug 26 05:40:03 sobnology kernel: res 41/40:00:84:b2:3f/00:00:04:00:00/00 Emask 0x409 (media error) <F> Aug 26 05:40:03 sobnology kernel: ata6.00: status: { DRDY ERR } Aug 26 05:40:03 sobnology kernel: ata6.00: error: { UNC } Aug 26 05:40:03 sobnology kernel: ata6.00: configured for UDMA/133 Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#20 Sense Key : 0x3 [current] Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#20 ASC=0x11 ASCQ=0x4 Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#20 CDB: opcode=0x28 28 00 04 3f b2 50 00 02 00 00 Aug 26 05:40:03 sobnology kernel: blk_update_request: I/O error, dev sdi, sector 71283332 op 0x0:(READ) flags 0x80700 phys_seg 58 prio class 0 Aug 26 05:40:03 sobnology kernel: ata6: EH complete Aug 26 05:40:03 sobnology kernel: ata6.00: exception Emask 0x0 SAct 0x1805128 SErr 0x0 action 0x0 Aug 26 05:40:03 sobnology kernel: ata6.00: irq_stat 0x40000008 Aug 26 05:40:03 sobnology kernel: ata6.00: failed command: READ FPDMA QUEUED Aug 26 05:40:03 sobnology kernel: ata6.00: cmd 60/08:b8:88:b2:3f/00:00:04:00:00/40 tag 23 ncq dma 4096 in Aug 26 05:40:03 sobnology kernel: res 41/40:00:88:b2:3f/00:00:04:00:00/00 Emask 0x409 (media error) <F> Aug 26 05:40:03 sobnology kernel: ata6.00: status: { DRDY ERR } Aug 26 05:40:03 sobnology kernel: ata6.00: error: { UNC } Aug 26 05:40:03 sobnology kernel: ata6.00: configured for UDMA/133 Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#23 Sense Key : 0x3 [current] Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#23 ASC=0x11 ASCQ=0x4 Aug 26 05:40:03 sobnology kernel: sd 6:0:0:0: [sdi] tag#23 CDB: opcode=0x28 28 00 04 3f b2 88 00 00 08 00 Aug 26 05:40:03 sobnology kernel: blk_update_request: I/O error, dev sdi, sector 71283336 op 0x0:(READ) flags 0x100 phys_seg 1 prio class 0 Aug 26 05:40:03 sobnology kernel: BTRFS error (device sdg1): bdev /dev/sdi1 errs: wr 0, rd 79, flush 0, corrupt 0, gen 0 Aug 26 05:40:03 sobnology kernel: ata6: EH complete Aug 26 05:40:03 sobnology kernel: BTRFS info (device sdg1): read error corrected: ino 2254065 off 94208 (dev /dev/sdi1 sector 71283272) Aug 26 05:58:22 sobnology kernel: ata6.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x0 Aug 26 05:58:22 sobnology kernel: ata6.00: irq_stat 0x40000008 Aug 26 05:58:22 sobnology kernel: ata6.00: failed command: READ FPDMA QUEUED Aug 26 05:58:22 sobnology kernel: ata6.00: cmd 60/60:d8:d0:04:72/02:00:16:00:00/40 tag 27 ncq dma 311296 in Aug 26 05:58:22 sobnology kernel: res 41/40:00:80:06:72/00:00:16:00:00/00 Emask 0x409 (media error) <F> Aug 26 05:58:22 sobnology kernel: ata6.00: status: { DRDY ERR } Aug 26 05:58:22 sobnology kernel: ata6.00: error: { UNC } Aug 26 05:58:22 sobnology kernel: ata6.00: configured for UDMA/133 Aug 26 05:58:22 sobnology kernel: sd 6:0:0:0: [sdi] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 cmd_age=0s Aug 26 05:58:22 sobnology kernel: sd 6:0:0:0: [sdi] tag#27 Sense Key : 0x3 [current] Aug 26 05:58:22 sobnology kernel: sd 6:0:0:0: [sdi] tag#27 ASC=0x11 ASCQ=0x4 Aug 26 05:58:22 sobnology kernel: sd 6:0:0:0: [sdi] tag#27 CDB: opcode=0x28 28 00 16 72 04 d0 00 02 60 00 Aug 26 05:58:22 sobnology kernel: blk_update_request: I/O error, dev sdi, sector 376571520 op 0x0:(READ) flags 0x80000 phys_seg 22 prio class 0 Aug 26 05:58:22 sobnology kernel: ata6: EH complete Aug 26 05:58:22 sobnology kernel: ata6.00: exception Emask 0x0 SAct 0x8d000342 SErr 0x0 action 0x0 Does this error means both my cache drives have problems? sdg & sdi are both my 1tb ssd cache drives.

already did the bios earlier this year actually and theres no update after that. its an old motherboard too. Any suggestion what else should I try?

oh wow that worked. removed a lot of the errors. Also I changed USB drive but the problem still occurs. Im having this errors Aug 25 00:52:24 sobnology kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W 5.10.28-Unraid #1 Aug 25 00:52:24 sobnology kernel: Hardware name: Gigabyte Technology Co., Ltd. Default string/X99-Designare EX-CF, BIOS F5c 06/15/2018 Aug 25 00:53:25 sobnology kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W 5.10.28-Unraid #1 Aug 25 00:53:25 sobnology kernel: Hardware name: Gigabyte Technology Co., Ltd. Default string/X99-Designare EX-CF, BIOS F5c 06/15/2018 Aug 25 00:56:25 sobnology kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W 5.10.28-Unraid #1 Aug 25 00:56:25 sobnology kernel: Hardware name: Gigabyte Technology Co., Ltd. Default string/X99-Designare EX-CF, BIOS F5c 06/15/2018 Aug 25 00:56:25 sobnology nginx: 2021/08/25 00:56:25 [error] 7487#7487: *181694 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.14, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.10", referrer: "http://192.168.0.10/Main" Aug 25 00:56:25 sobnology nginx: 2021/08/25 00:56:25 [error] 7487#7487: *180685 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.14, server: , request: "POST /plugins/dynamix.system.temp/include/SystemTemp.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.10", referrer: "http://192.168.0.10/Main" Aug 25 00:56:25 sobnology nginx: 2021/08/25 00:56:25 [error] 7487#7487: *181083 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.14, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.10", referrer: "http://192.168.0.10/Main" Aug 25 00:56:25 sobnology nginx: 2021/08/25 00:56:25 [error] 7487#7487: *181865 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.14, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.10", referrer: "http://192.168.0.10/Main" Aug 25 00:56:25 sobnology nginx: 2021/08/25 00:56:25 [error] 7487#7487: *181887 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.14, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.10", referrer: "http://192.168.0.10/Main" Aug 25 00:58:45 sobnology nginx: 2021/08/25 00:58:45 [error] 7487#7487: *181887 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.14, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.10", referrer: "http://192.168.0.10/Main" Does this mean my motherboard has problems?

Any idea how i can get rid of this error Aug 23 23:58:43 sobnology kernel: pcieport 0000:00:02.0: AER: Corrected error received: 0000:00:02.0 Aug 23 23:58:43 sobnology kernel: pcieport 0000:00:02.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) Aug 23 23:58:43 sobnology kernel: pcieport 0000:00:02.0: device [8086:6f04] error status/mask=00000040/00002000 keeps popping out every once in awhile.

Oh yeah I forgot about that. But I have a Frankenstein type of case haha. I dont actually have front IO ports because of what I did. Will try and find a way to get usb2 ports. I didnt back it up. I just relocated it to a different usb3 port. So far Ive uninstalled nvidia driver plugin and unraid has been running for 10hours now without the gui crashing.

Aug 24 00:03:45 sobnology kernel: kernel BUG at drivers/md/unraid.c:356! Aug 24 00:03:45 sobnology kernel: invalid opcode: 0000 [#1] SMP PTI Aug 24 00:03:45 sobnology kernel: CPU: 6 PID: 2300 Comm: kworker/u24:7 Tainted: P O 5.10.28-Unraid #1 Last error before everything crashed.

sadly i dont have usb2 ports. Just a bunch of 3.0 & 3.1. I did try using the other usb port. Im also having this error in the logs Aug 23 23:58:43 sobnology kernel: pcieport 0000:00:02.0: AER: Corrected error received: 0000:00:02.0 Aug 23 23:58:43 sobnology kernel: pcieport 0000:00:02.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) Aug 23 23:58:43 sobnology kernel: pcieport 0000:00:02.0: device [8086:6f04] error status/mask=00000040/00002000

I actually mentioned that I did buy new drives. But the transfer speeds were 35kbps or <100kbps. Forgot to mention that I did change sata controller and cables.

Hey Guys, So heres my dilemma. My WD 4TB Red got a few errors on them so I decided to replace it with a newly RMA WD 4TB red. So after a few hours, unraid reported that the new drive was having more error than the old one which resulted to unraid emulating the said disk (Disk8). Since I knew the drive was newly RMA cant really believe that its dead. Anyway I bought a Toshiba N300 6TB Drive. So I replaced the drive and unraid did its thing. 24hours later, I checked my rebuilding % was stuck to 19% because the transfer rate was at 35kb/s and needed like 2yrs+ to finish sometimes even more than that. So I rebooted and it did the same thing. Now I cant hardly use my server anymore because the GUI crashes (blank pages). Im currently using krusader to manually transfer the files from my dead/emulated drive to the other drives in my server. Krusader is still currently running while GUI is down, but all my other docker apps seems to be dead. At this point all I wanted to do is just transfer the files, make a new config to i can remove the dead drive. Then re-add the new drives that was previously giving me errors. Is what im doing the right thing to do? Or is there other fixes to my problem. Diagnostics below doesnt have the 6tb drive plugged. *Also I have the nvidia driver plugin, and read somewhere it crashes the gui. Do I need to uninstall it? sobnology-diagnostics-20210823-2040.zip

i changed the mtu to 1500 and it worked. it was working with 9000 for a few months already.

apparently everything. except for nextcloud. plex,radarr,rutorrent,duckdns and emby are all without internet. cant access the apps, cant check for updates for plugins/docker. I currently dont have vms atm. i also tried doing the new config thing. but didnt work as well.

Hi, Anyway this is kinda weird but I just experienced 4 blackouts this week. My server was working properly before the blackouts, and now my server doesnt have internet anymore. It can be access through LAN though. Ive tried various changes based on google results but nothing seems to work. Any suggestions? TIA sobnology-diagnostics-20200831-2049.zip

Noob question. Is it possible to use letsencrypt to direct port 80 to an apache docker? I tried using this, but didnt work. Also I dont know what Im doing, just doing my best to copy something similar I guess. Copied this from the phpmyadmin config. server { server_name apachenet.*; # enable for ldap auth, fill in ldap details in ldap.conf #include /config/nginx/ldap.conf; location / { # enable the next two lines for http auth #auth_basic "Restricted"; #auth_basic_user_file /config/nginx/.htpasswd; # enable the next two lines for ldap auth #auth_request /auth; #error_page 401 =200 /login; include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_apache apache; proxy_pass http://192.168.0.7:80; } }

Is it possible to add/change other settings in the GUI via the rtorrent.rc like the maximum memory usage (MiB) in the connection tab?

Hi, Just wondering, my pihole docker doesn't auto start sometimes on boot? But would start properly if I manually start it. Anybody know why that happens? [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] 01-resolver-resolv: applying... [fix-attrs.d] 01-resolver-resolv: exited 0. [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 20-start.sh: executing... stty: 'standard input': Inappropriate ioctl for device ::: Starting docker specific checks & setup for docker pihole/pihole WARNING Misconfigured DNS in /etc/resolv.conf: Two DNS servers are recommended, 127.0.0.1 and any backup server WARNING Misconfigured DNS in /etc/resolv.conf: Primary DNS should be 127.0.0.1 (found 127.0.0.11) nameserver 127.0.0.11 options ndots:0 stty: 'standard input': Inappropriate ioctl for device [i] Existing PHP installation detected : PHP version 7.0.33-0+deb9u3 [i] Installing configs from /etc/.pihole... [i] Existing dnsmasq.conf found... it is not a Pi-hole file, leaving alone! chown: cannot access '/etc/pihole/dhcp.leases': No such file or directory ::: Pre existing WEBPASSWORD found Using default DNS servers: 8.8.8.8 & 8.8.4.4 DNSMasq binding to default interface: eth0 Added ENV to php: "PHP_ERROR_LOG" => "/var/log/lighttpd/error.log", "ServerIP" => "192.168.86.8", "VIRTUAL_HOST" => "192.168.86.8", Using IPv4 ::: Preexisting ad list /etc/pihole/adlists.list detected ((exiting setup_blocklists early)) https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts https://mirror1.malwaredomains.com/files/justdomains http://sysctl.org/cameleon/hosts https://zeustracker.abuse.ch/blocklist.php?download=domainblocklist https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt https://hosts-file.net/ad_servers.txt ::: Testing pihole-FTL DNS: FTL started! ::: Testing lighttpd config: Syntax OK ::: All config checks passed, cleared for startup ... ::: Docker start setup complete [i] Pi-hole blocking is enabled [i] Neutrino emissions detected... [i] Target: raw.githubusercontent.com (hosts) [i] Target: mirror1.malwaredomains.com (justdomains) [i] Target: sysctl.org (hosts) [i] Target: zeustracker.abuse.ch (blocklist.php?download=domainblocklist) [i] Target: s3.amazonaws.com (simple_tracking.txt) [i] Target: s3.amazonaws.com (simple_ad.txt) [i] Target: hosts-file.net (ad_servers.txt) [i] Number of domains being pulled in by gravity: 138135 [i] Number of unique domains trapped in the Event Horizon: 115901 [i] Nothing to whitelist! [i] Number of regex filters: 0 [✓] DNS service is running [✓] Pi-hole blocking is Enabled [cont-init.d] 20-start.sh: exited 0. [cont-init.d] done. [services.d] starting services Starting lighttpd Starting pihole-FTL (no-daemon) as root Starting crond [services.d] done. Stopping lighttpd Stopping pihole-FTL Stopping cron [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] syncing disks. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting. Thanks, Karl

nginx: [alert] detected a LuaJIT version which is not OpenResty's; many optimizations will be disabled and performance will be compromised (see https://github.com/openresty/luajit2 for OpenResty's LuaJIT or, even better, consider using the OpenResty releases from https://openresty.org/en/download.html) nginx: [error] lua_load_resty_core failed to load the resty.core module from https://github.com/openresty/lua-resty-core; ensure you are using an OpenResty release from https://openresty.org/en/download.html (rc: 2, reason: module 'resty.core' not found: no field package.preload['resty.core'] no file './resty/core.lua' no file '/usr/share/luajit-2.1.0-beta3/resty/core.lua' no file '/usr/local/share/lua/5.1/resty/core.lua' no file '/usr/local/share/lua/5.1/resty/core/init.lua' no file '/usr/share/lua/5.1/resty/core.lua' no file '/usr/share/lua/5.1/resty/core/init.lua' no file '/usr/share/lua/common/resty/core.lua' no file '/usr/share/lua/common/resty/core/init.lua' no file './resty/core.so' no file '/usr/local/lib/lua/5.1/resty/core.so' no file '/usr/lib/lua/5.1/resty/core.so' no file '/usr/local/lib/lua/5.1/loadall.so' no file './resty.so' no file '/usr/local/lib/lua/5.1/resty.so' no file '/usr/lib/lua/5.1/resty.so' no file '/usr/local/lib/lua/5.1/loadall.so') Are this errors normal? Anybody else having this errors? My nextcloud was working a few days ago then suddenly doesnt work anymore.

Enabling cache for Frontier Enabling cache for Origin Enabling cache for Riot Enabling cache for Steam Enabling cache for Uplay Enabling cache for Windows Enabling custom DNS forwarder bootstrap finished. checking Bind9 config Running Bind9 Running bootstrap.sh... nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful Bind9 { Enabling cache for Blizzard 2019-02-18 15:13:36 Failed to set file handle limit: Operation not permitted Enabling cache for Frontier Enabling cache for Origin Enabling cache for Riot Enabling cache for Steam Enabling cache for Uplay Enabling cache for Windows Enabling custom DNS forwarder bootstrap finished. checking Bind9 config Running Bind9 Just wondering, is the "2019-02-18 15:13:36 Failed to set file handle limit: Operation not permitted" error normal? Everything from origin seems to be caching properly, but on steam nothings being cached. Thanks, Karl

I actually did got this to work. I created a VM with the Windows 7 Template. Added the vdisks I needed then save the VM (not boot). I edited the XML, look for the network card and change type to e1000. Afterwards you can install xpenology. After installation im not sure on this part, but I think I edited the XML again and made cdrom (xpenology iso) to boot order 1 and the vdisks to boot order 2 and so on.

Im not on any VPN. I did open the ports already. But rtorrent still shows that its not opened.

Hi, Why is the download very slow even if the peers and seeders are good? I have a 50mbps connection and all I can download is < 200kbps. My upload speed is fast though. Karl

Hi, Why is the download very slow even if the peers and seeders are good? I have a 50mbps connection and all I can download is < 200kbps. My upload speed is fast though. Karl

I just installed the app. I can access deluge webgui but not flexget. Also the flexget in settings wont start.

[cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. After installing and changing port 80 to 8099. I cant access the webui. This is all I have in logs. How do I fix this?