LordShad0w

So should I start nuking plugins? I have no problem doing that

It's currently running the parity check. Also, how can I force it to boot into safemode if I can not get it to ever stop the containers and reboot? I appreciate your help. This whole issue started because I asked it to stop before I was going to issue the shutdown command and it just never... stopped. It just said it was retyrying stopping everything for over 45 minutes before I did a hard shut down. ETA I did just recently update from 7.2.3 and had no reason to reboot or anything since. Not sure if that matters but thought I would share.

The only thing that shows up is that the data is apparently still there since the space on the drives is the same. There were no warnings or errors prior to this, so I am really confused and in more than a small bind as I don't even remember all the share names or all the tools and settings for things like cloudflared and dockersoctet and ... too many other things. The hard reboot wiped the logs I suppose. I will see if I can get it to go online long enough to pull them so I can share. Apologies if this sounds dramatic, but to me this is a fairly massive failure and I am unsure how to proceed so I don't lose years of data. tower-diagnostics-20260410-1835.zip

Ok, cool. Doesn't change my point though. You lose nothing by being actually helpful in a help thread. Basically saying RTFM after someone has explained that they followed all the given steps and have reached an impasse... Kind of a dick move. :)

It showed nothing. Don't sweat it, I uninstalled it. Seemed like a nice tool though. Perhaps you could try being a bit more understanding in the future since this is support thread and you are the dev. Not everyone is super familiar with Linux or with new tools. From your github comments I noticed you say you don't care about users that don't know Docker. Not the greatest attitude considering that that is 90+% of Community Apps. Anyhow, I hope you choose to take this as constructive criticism since that is how it is intended. Best of luck in the future.

Strange, I see what happened but don't know how to fix it. It is as follows: I ran the commands initially but apparently did not realize that apparently the folders (users etc.) were NOT created. I ran the commands above again, and they are still not created. i am not sure how to proceed. I am on the root account, so permissions are not an issue. Any idea what it could be? Also thank you for being kind and helpful. It is increasingly rare online these days apparently.

Anyone have some info on this? I followed the instructions to the letter and what is mentioned in this error has nothing relating to any of the command issued or directories created. I would really appreciate some help from those of you who have this all working. :)

I found the section in question. It apparently was not in the main install page in CA. It did not answer my question though. Where does the /srv/users go? It is not currently found or created, so if you could please tell me where it is or where I should create it, I would appreciate it.

MakeUserDirs: scope folder does not exist: /srv/users This is the error I get on first start. Looking at the folders that were created as per the pre-requisites on install, there is no /srv/users directory. Should I create this manually and if so, where should they be created? Really would love to use this but I can't get it running properly. Any help is appreciated! Thanks in advance :)

Posting to say I just experienced this exact same issue. ln -s /var/local/emhttp /usr/local/emhttp/stateThe command above worked for me as well. I really wish that the root cause could bee addressed though. This is strange behavior and has never once happened on my machine prior to v7, though it seems it has been an issue even for others on previous builds too. I am just glad the above worked, as my server is currently mid parity check and a hard power off was not an option. To @raqisasim and @phoenixdiigital thank you both so much for sharing a fix that worked. Your efforts are appreciated.

This is the exact issue I am currently having as well.

Ok, thanks much, that was all I needed to know 😁👍

Ok, it seems this issue is solved now after removing unused plugins pretty much. One other question as now I constantly see "shfs" running constantly. Is this normal and should it be constantly running 24-7?

Thank you @Squid ! I will give it a go 😊 This is the one currently using the most at 40 and 50% respectively on 2 instances. \_ /usr/libexec/samba/rpcd_lsad --configfile=/etc/samba/smb.co

I disabled the file integrity plugin scheduler and deleted the plugins I do not use. Now, lsof still runs constantly? Either way, the behavior seems to have stopped as now CPU usage still pegs cores at 100% as it was previously but I am not getting the massive temperature spikes any longer. I apologize that I did not go one at a time when deleting unused plugins so that I could point to something specifically as being the culprit. I wonder if @JorgeB or yourself looked at the difference between my initial diags and the Safe mode diags? You guys would likely be able to point to the plugin that was causing it. Perhaps (just an idea) someone could make a pinned post on how to actually read diags so that as users we could do more of our own troubleshooting so as not to be such a bother. Though I assume not, since it likely requires a much more in-depth knowledge of Linux systems. However, it would just be nice knowledge to have :) . If it would be helpful I will attach my current diags for further inspection.tower-diagnostics-20251106-1346.zip

I went from 7.1.4 iirc

Turbo has been disabled since I built it and it is also on the power saver profile in the Unraid UI. The cooler is securely and properly mounted and secured and I used Cryonaut thermal paste at build time. (3 years ago) I doubt it has degraded in that short period of time? This literally just started after I updated to 7.20 the day before my first post. This is why I am confused and lost as to a cause and possible solution. Please understand I am not at all trying to be argumentative, I am only trying to address your suggestions. :) I sincerely appreciate your help.

360mm Lian Li Gallahad 2/3 AIO with Noctua 3k rpm fans controlled via IPMi Normally runs 32C at idle with fans @500 RPM

My main issue is the temperatures. There is plenty of overhead on the proc, for sure. Temps hitting 80+C regularly every few minutes is not at all normal behaviour for my system. I will go through and remove things as I can.

tower-safemode-diagnostics-20251105-1214.zip Got the time. Here are the safemode diags. Thanks again

I still have a lot of people streaming from the server. I will reboot into safe mode and pull diags as soon as I am able. Thank you again Jorge.

Ok just gave it a try and while my fans are still going full tilt, the CPU temp according to the dynamics plugin I had to install shows normal temps at 36C. What do I do now?

Thanks Jorge, I will give that a try and check back in. No idea why my temps are so consistently high all of the sudden.

This is the only thing I can point to that is causing the issue I am having. I run htop, sort by cpu and it shows most times between 80-90% CPU usage. My temps climb RAPIDLY to almost 80C even though it is only pegging (typically) 2 cores at 100%. Every minute or couple minutes, the cycle repeats. I just updated to Unraid 7.2 yesterday. I would really appreciate a hand in figuring this out as my server keeps sounding like a jet readying for take-off where before it would only do so under actual heavy load. Attached are my diags as of a minute ago. tower-diagnostics-20251101-1225.zip

I am having an issue all of a sudden where ANY game I load stutters every 1 second. It makes anything I have unplayable. I removed and reinstalled the docker. I removed the database and reinstalled that as well. No change. If anyone could help, I would sincerely appreciate it.