Grimmdus

Figured it out. I named my media server the same name. Sooooo the media i was trying to connect to was acutally the deleted container of the limetech plex container remaining as a authorized device on my account confusing the heck out of me. You can't access media to add a library when the container doesn't even exist to have permissions lol. After trying every plex docker out once or twice trying to see if it would be different the duplicate new server appeared, not sure how i didn't see it. deauthorizing the old docker took away the ghost. Now i just gotta rebuild from the ashes.

Thanks for the suggestion notyourserver-diagnostics-20200315-0512.zip

I recently added a parity drive and updated plex from the limetech version to the plexinc version. When i was doing some maintenance i found files that used one of my other profiles despite me only using that profile for smb folder access. Also my plex wasn't allowing new files i added to the media folders to be seen when scanning for new files. Anyways i was looking up the issue and it was suggested to use docker safe permissions to reset the file permissions. I reset the perms and now plex can't see folders any deeper than the data folder /mnt/user/media when i go to add folders and it says playback error saying it can't tell if the drive is mounted or not. I can play my media files from my explorer just fine. Though that is using the other profile in explorer for file acess, but i am logged in as root on the web acess in network. When i checked the ls -al everything was drwxrwxrwx down to the files which had full rw owner nobody. I just updated to latest stable hoping something would change and nothing has. I am a relative noob with linux. Basically anything i do is look it up copy paste. Please help !

I've tried tape, it's almost like a magnet to my son he has to peel it off. Coins can work, but only if the button is flush which unfortunately mine wasn't, we will see what the new drive is like, x fingers. Found a couple cases that might help but both have power buttons pretty prominent outside of the doors too... gotta figure something out though.

Pretty much..though i did break a couple figurines too.

Been there done that. Now if only a good spanking was 100% effective on a 2 year old.

The title says pretty much what i need. After avoiding the inevitable from happening one of my kids snapped my Bluray drive disc tray off. Now i need to buy a new one but that would be pointless without some safety precautions. I can't move the server to a safer location for the foreseeable future. I am looking for a more child-safe case with a door. With that said if there is a less expensive or free solution i much prefer that since i don't really have 80 bucks for a new drive let alone another 80 for a case with a door (guessing on the price). I've been looking but it seems like the solutions require you to be in an OS like ubuntu or windows to disable it. I was wondering if there is a way to disable it in unraid and use a software button to open and close the tray. I don't see any dockers or in os options and i don't know of any hardware solutions unless there is a Bluray with a child safety lock on it that someone knows of that isn't too expensive. Any ideas Thanks, Grimmdus

Thanks for the reply, I ended up deleting the config folder again as well as uninstalling teamspeak client and its configs for a full wipe on both server and clientside. Worked this time around. Thanks for your hard work! Grimmdus

Hi, So I had a working ts3 server and one day it just wouldn't connect anymore. So i have tried reinstalling both the docker and the client and i have tried deleting the AppData manually to reset the server, the problem is when i go to log into create the server for the first time it doesn't ask for my privilege key is just attempts to connect then doesn't. Not sure if this means that it is still seeing the old server despite me deleting the AppData. Maybe i am missing a file somewhere? i have deleted the files taht exist in the appdata on the cache and on the main share. both folders named binhex teamspeak. The server even started up giving me the first time the important message with the privilege key. Not sure what is going on...any ideas or experience is greatly appreciated. Thanks, Grimmdus

Awesome thanks for the fast response. gonna try out the command line plugin first. I've seen more than a few mention doing stuff through the command line and I've been able to get around without it. This time, however, the teamspeak3 linuxserver.io plugin specifically said it was important to use command line instead of the WebUI for the logs, so i figured I'd finally start looking into it. Thanks again for your help!

So half the stuff I have looked at mention to do something via the command line. I may be blind but I haven't seen any option for command line in my servers webgui. Is there a plugin/docker i need to install. Am I supposed to be using a 3rd party program to ssh in to a command line? If so what is there a link to a tutorial on doing this? Grimmjsb

Thanks again guys, working great. That makes the docker set up make sooo much more sense to me.

Thanks squid, the issue was definitely the container vs host. I was putting the path in host because the container field wouldn't search my folder paths so i thought for whatever reason that field was for the config only I just got it to work. Thanks everyone!

So this is a share problem with my dockers in general?

last one Also will do on the post i didn't notice the sub forum when i went to post, but i'll definitely make sure next time

next screens

As requested new screens i went into adv view expanded it so it shows the config path and opened up a edit on the media folder. Also to note under deployed host ports the pms one is red. adding a couple screens to this and another post after for extra info

Sorry i didn't put the info i attached a screen grab

I am using the limetech template This is the install screen Pulling image: limetech/plex:latest IMAGE ID [latest]: Pulling from limetech/plex. IMAGE ID [6ffe5d2d6a97]: Already exists. IMAGE ID [f4e00f994fd4]: Already exists. IMAGE ID [e99f3d1fc87b]: Already exists. IMAGE ID [a3ed95caeb02]: Already exists. IMAGE ID [ededd75b6753]: Already exists. IMAGE ID [1ddde157dd31]: Already exists. IMAGE ID [1a90cb28de72]: Pulling fs layer. Downloading 100% of 772 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [dd387e5ef61d]: Pulling fs layer. Downloading 100% of 117 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [405c6ced8b04]: Pulling fs layer. Downloading 100% of 562 B. Verifying Checksum. Download complete. Extracting. Pull complete. Status: Downloaded newer image for limetech/plex:latest TOTAL DATA PULLED: 117 MB Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="PlexMediaServer" --net="host" --privileged="true" -e TZ="America/Phoenix" -e HOST_OS="unRAID" -v "/mnt/cache/appdata/PlexMediaServer":"/config":rw limetech/plex ab4cf9ca715812170bbcd19a79e6b57a8774c8ea3e40083b30ffc37c7e33791f The command finished successfully! But i have two other paths set that aren't there and I can't access them from inside the plex web gui In Shares the setting for the two paths i added past the auto added config are as follows One is set to my mnt/ user/media folder it is set to use all disks and cache YES export yes security public the other to a mnt/user/Transcode folder is set to cache only export yes security public When i go into my plex web ui i get the following folder access /var/lib/plexmediaserver plex / mqueue config data resolv.conf hostname hosts the only folder more than one deep is this path /config/Library/Application Support/Plex Media Server My only conclusion is for whatever reason it won't mount any additional paths, i have tried editing and adding them after but to no success. I have looked for guides and troubleshooting stuff and they all just tell me how to add volumes, and to make sure my transcode and config folders are cache only. I also haven't seen any guides on the network settings inside the plex GUI, maybe i'm blind, that is a possibility but i have off and on looked for several days and not seen my issue or a solution to my issue. HELP! (I just tried to attach the log and it's too large 400kb) i'll past it if someone wants

Ripped 5 in a row only hiccup is i have to click and open the drive to mount it about half the time so makemkv can see it but otherwise it seems to have worked without a hitch. Once i go to do some compression and transcoding i'll do a more in depth look at the videos to make sure they turn out well and i'll post back if your interested.

So i got the makemkv-rdp up and running thank you, had to fiddle with it since i accidentally left the /unraid path on the docker img ouch. Thank you guys for the help. As far as getting the bluray mounted in the vm i looked back at the page i mentioned re a similar issue for a windows vm here: https://lime-technology.com/forum/index.php?topic=35504.0 I just went to tools tab under system devices towards the bottom under scsi devices i found my bluray was 5:0:0:0 and fed that into this xml code. <controller type='scsi' index='0' model='virtio-scsi'/> <hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host12'/> <address type='scsi' bus='0' target='0' unit='0'/> </source> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </hostdev> changes the host from 12 to my device number of 5 and the bus, target, and unit were all still the same 0's (I copied my vm xml to another document first because i messed it up the first time by getting a number wrong.) Then i inserted the xml code into the /devices area between two existing devices (for me i put it right after the /disk end cap. saved it and restarted my vm and poof i now have access to my bluray in my ubuntu vm. So the good thing i now have 2 options for ripping my collection the makemkv-rdp docker and also inside my ubuntu vm. Thanks for your time guy's edited main post title for solved with a better title.

No just seeing if it was updated.

are the librabries and the audio codecs updated in the docker? I know when i installed it it had a drawn out process of updating libraries and updating ffmpeg stuff to work with mkaemkv.

I tried the makemkv-rdp yesterday before installing it manually abut when i started it up it went to the program then told me the license was old i canceled and then the program would no longer open for me properly like it was glitched. If i can't get it to run maybe i could reinstall and look at the xml to steal the device setting though? Worth a second shot. Will look into it again.

I have a LG WH14NS40 installed in my server box, I am running the latest beta for Unraid. I am trying to decide whether to go through a docker app in the vm or use to go another route and use this https://github.com/donmelton/video_transcoding setup. Which the docker app i found is is based on. I got a Ubuntu VM running and i have installed makemkv, vlc, ffmpeg, git, dockerengine,etc.. to get ready to rip and transcode my collection for plex but the only "optical drive" i seem to have is a mounted ubuntu iso from the vm setup and install. I am out of necessity running the VM in VNC from my main pc. I see no options in the VM creation/edit area to add anything other than hard disks, and iso disk images. Linux hardware says the bluray burner is compatible. I looked in the xml there seemed to be an area i might be able to add it under devices manually? but have not clue outside of that as far as where to begin and what to write etc. Closest info to this I could see dealt with vmware and another post that was talking about adding a dvd drive to windows vm. Please have mercy on me ;p I am a complete noob to linux based systems, unraid, and server setup in general. Only a passing familiarity with programming in general. I am learning as i encounter each hurdle.