Obiwantje

I would like to add a vote for including the netatalk latest beta for us AFP folks - the current version is just not very good, rather have the BETA!

Not sure what is going on - was copying a file to the UNRAID, and then got a copy error. Took the server down properly and rebooted, to no avail. Worked flawless until this moment. I checked all drives for SMART issues - none Attached is my LOG - can anyone please help get me back up and running? syslog-2011-04-19.txt

Sorry for that late reply....This seems to work now - though still no integration of the parameters.....this is the max I seem to be able to achieve with my 3ware controller....

I forgot to add one screenshot (below) - I did the add of the smartopt - but as you can see it seems like it get's confused by the spaces used (translates them as %20%)

We're getting there! I think there is one more little thing wrong in your code...check the screens:

I think you did the right thing, but took the wrong part of the serial?

Thanks BJP999 - Attache dis what I see now. How about the suggestion I made above, would that not work easier: So here is how I can get the serial number of the drive "sda": smartctl -i -d 3ware,0 /dev/twa0 | grep "Serial Number" | head -n 1 | awk '{print $3}' Output: 5XW138R8 For drive "sdb" I would change 3ware,0 to 3ware,1 and... Output: 5XW17LVM

I get your point - So I installed 5.0b6a - And ran both commands again.....I see some data in there that looks different, and am hopeful this may be helping! Thanks for your continued effort! lsbyid.txt mdstatus.txt

I am installing 5.0b6a (had done that before) and will run the commands again. I have the 3ware 9650se-m8-24 it is a 24 port version, with cache, and battery backup unit....and indeed rather expensive...would hate it to be a wasted investment. With regards to your remark on drive letters changing...I have not seen that happen at all?

So here is how I can get the serial number of the drive "sda": smartctl -i -d 3ware,0 /dev/twa0 | grep "Serial Number" | head -n 1 | awk '{print $3}' Output: 5XW138R8 For drive "sdb" I would change 3ware,0 to 3ware,1 and... Output: 5XW17LVM Can this help us to get a step closer?

Now we are getting somewhere! I found this link that should help here: https://wiki.xkyle.com/3ware_Smart_Test

Attached....thanks for helping here, I really appreciate you taking all this time! Ask me anything, I am your remote hands here! lsbyid.txt

Our posting crossed! Time for an IRC chan for UNRAID enthousiasts? Requested file is attached mdstatus.txt

No I was not. This is what DOES work from the console: root@Tower:~# smartctl -d 3ware,0 -a /dev/twa0 smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST32000542AS Serial Number: 5XW138R8 Firmware Version: CC34 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Fri Apr 8 14:35:00 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 112 100 006 Pre-fail Always - 48951713 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 412611 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 64 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 3 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 092 092 000 Old_age Always - 8 190 Airflow_Temperature_Cel 0x0022 073 064 045 Old_age Always - 27 (Lifetime Min/Max 25/36) 194 Temperature_Celsius 0x0022 027 040 000 Old_age Always - 27 (0 25 0 0) 195 Hardware_ECC_Recovered 0x001a 054 052 000 Old_age Always - 48951713 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 62723702390832 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 916374968 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 354696985 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t]

First off: THANKS for helping! I tried it, but it does not seem to work, unless I am doing something wrong. I first did a clean install of unmenu, then the updates, and lastly overwrote the files and restarted unmenu.