ich777

What should be updated? The plugin barely need updates since the plugin downloads the driver packages which are important and make the plugin work.

Do you have other applications outside from your network running and working? Please note that you need a public IP which is reachable from the outside world for this to work. Remove the last two entries please, I assume these IP addresses are from your Docker network which is not reachable, these addresses are only used by Docker to route the traffic. Is 192.168.50.75 your server? Then this is the correct IP to route through but the source should be WAN and the destination should be your server.

Please also don't forget to include Diagnostics!

Thanks for the Update, however sad to hear that it is failing. However the ARC A380 is a good choice for transcoding but not for power draw. Otherwise a Nvidia T400, T600, T1000 or even better a Nvidia A400 would be good choice.

Did you follow the recommended post on top?

Probably a port conflict. Go into the template change something and change it back to what it was, to be able to click the Apply button, click Apply and in the next screen you will see the exact error message.

Nobody requested that until now, it would be possible however, I'll look into that and report back, give me a few days.

@Bob-omb all solved?

I think it would be best to run another machine or even a RaspberryPi with keepalived installed for that since the Replication Plugin is not designed to be used like that. Sorry...

I'm not sure if Tailscale is the right choice for that since each Client must be connected to your Tailnet which kind of defeats the purpose of RustDesk. The Cloudflare Tunnel costs money, at least if you want to tunnel UDP traffic AFAIK. However it is well enough to just deploy it and open the ports in your Firewall, most of the times it is best not to overthink it since this is just the Server and Relay part from RustDesk and if encryption is enabled (which it is by default) then nobody else without the key will be able to connect through your Server/Relay and the processes inside the container are not even running as root inside the container. In the end you can set it up like you want it but I can't give support for complicated setups.

Please rethink what you are trying to acomplish here… you have to forward the ports anyways otherwise it wont‘t work, if you do it through nginx via streaming ports or directly to the container makeas barrly any difference since you‘ve already made a hole with your proxy… 😅

Please look at that post: https://forums.unraid.net/topic/98978-plugin-nvidia-driver/page/202/#findComment-1571235

First of all I would recommend that you upgrade to 7.1.4 Sorry that I have to say that but it seems like you have a counterfeit card on hand: Aug 3 19:03:07 HomeServer kernel: NVRM: The Unknown NVIDIA GF1xx Series GPU installed in this You usually can easily spot that here: 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] [10de:1c82] (rev a1) Subsystem: NVIDIA Corporation Device [10de:0000] Kernel modules: nouveau, nvidia_drm, nvidia 05:00.1 Audio device [0403]: NVIDIA Corporation GF116 High Definition Audio Controller [10de:0bee] (rev a1) Subsystem: NVIDIA Corporation Device [10de:0000] The fist PCI device (05:00.0) is your GPU, which is listed as a GP107 (Pascal) with a changed vBIOS it seems, however the second device that you can see above (05:00.1) is the Audio Device from that card where you can see that it's a GF116 which basically means it's Fermi 2.0 based which is not supported anymore: Click <- this is often times the main indication since only the GPU is changed but not the Audio Controller.

It seems that your GPU needs to be reset since you got XID error 154 however I really can't tell what causes the issue, you can try to downgrade to the previous version from Unraid and see if you are experiencing the same issue. However what you can try first is: Update the BIOS, if a BIOS update is available Check if ResizableBAR support is enabled in your BIOS Check if Above 4G Decoding is enabled in your BIOS You can learn more about XID errors here: Click Please always include Diagnostics in hardware issue posts.

Yes, but keep in mind when the driver version v580 is released they will drop support for Pascal which is the P4000 based on. I would rather recommend that you get something future proof like the Nvidia T400/T600/T1000 (Turing based an now also a few years old) or you look into a Nvidia A400 (Ada based). For a few simultaneous h265 main streams theses cards should be more than enough.

Sorry, without Diagnostics I can't help.

Okay, issue with those old drivers (series 535) is that they don't compile against newer Kernels which Unraid uses. However you are now running the nouveau driver, I assume because of nvidia-smi: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP104GL [Quadro P4000] [10de:1bb1] (rev a1) Subsystem: NVIDIA Corporation Device [10de:11a3] Kernel modules: nouveau 01:00.1 Audio device [0403]: NVIDIA Corporation GP104 High Definition Audio Controller [10de:10f0] (rev a1) Subsystem: NVIDIA Corporation Device [10de:11a3] 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP106GL [Quadro P2200] [10de:1c31] (rev a1) Subsystem: Hewlett-Packard Company Device [103c:131b] Kernel modules: nouveau 02:00.1 Audio device [0403]: NVIDIA Corporation GP106 High Definition Audio Controller [10de:10f1] (rev a1) Subsystem: Hewlett-Packard Company Device [103c:131b] Possible, some applications need newer instruction sets which these old CPUs doesn't support anymore. However from what I know a P4000 should work just fine even with the latest driver which is available in the plugin.

I've deprecated the Minecraft Bedrock container about a month ago, please switch over to the container from @binhex .

I assume this is the GPU, however what is PID 1122864 from the screenshot from above? If this is the process that you've issued the command then yes, it's transcoding on the GPU. Did you pass over /dev/dri/card1 to your container too? How much load is on your CPU (please don't forget that you possibly have to transcode audio and this is done on the CPU). Please note that this would be a question for the General subforums.

No, that's not possible. May I ask what applications you want to remain running? Are these applications primarily running on the backup server?

Sorry, but I only see one Nvidia Card in your system, you can easily see that when you go to Tools and PCI Devices. I only see your P2000 and the syslog also doesn't show any signs of the P4000. Please check if the device is properly seated (maybe reseat it) and if it has external power connectors check if they are properly seated. However I would also have to say this wouldn't be the first Quadro card I see dying, these cards are now pretty old <- not that your card is dead, but I always would like to point that out.

What do you mean with that? RAM or what exactly?

Nope, I don‘t think that this container is compatible. Sadly there are some out there which are not compatible at all. Your best bet would be to use the Tailscale Sidecare method.

This is a ISP issue and I see that from time to time. Sorry but this is really hard to accomplish and I won‘t change that since this would be really hard to implement and got almost no time on hand currently. Again I tried to download the file and it was just working without any issue, of course I tried that in my browser but it worked just fine.

I‘m not 100% sure what you are referring to? My RustDesk-AiO is just the server and relay in one container and the latest version is 1.1.4 which is up to date. I don‘t hab a RustDesk (client) container.