ent44

It worked!!! I've updated the firmware (twice!) and god... my versions were outdated... I think this didn't solve the problem with the firmware but it helped (http://i.imgur.com/mgdvLxA.jpg) Now thanks to user 1812 (thanks lad) I remembered I set my power management to max performance (I don't know why) but when I changed it from "max performance" to "os controlled" my CPU is idle-ing down. My server went from 150W idle to 120W idle, great improvement IMO. I made a shitty photo of my screen so people can find this option, if you boot up the server > press f2 > power management > "os controlled" (http://i.imgur.com/N8SGbzZ.jpg). And I regret I didn't get an enterprise iDrac for my server because I had to sit in the shed for 2 hours and it's snowing outside... Really grateful you guys helped me out :^)

I totally forgot about that, I'll try to find the setting in my iDrac. I'm going to upgrade my firmware to the latest version too, might help the issue.

That's a real shame because my CPU usage is never over 40% ish, so I waste a lot of power. Might convince me to swap my Plex to my R420

Sorry, had a long day is this problem related to unRaid or to any software?

Doesn't that mean it'll use full power? Or am I wrong there?

So I ran Common problems plugin (lovely plugin) and it gave me this error, I've seen some other people have it but every problem seems different. Would love some help, here is my system info Model: Dell R710 M/B: Cisco Systems Inc. - 0YMXG9 CPU: Intel® Xeon® CPU L5630 @ 2.13GHz HVM: Enabled IOMMU: Enabled Cache: 128 kB Memory: 64 GB (max. installable capacity 288 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mb/s, full duplex, mtu 1500 eth1: 1000 Mb/s, full duplex, mtu 1500 eth2: 1000 Mb/s, full duplex, mtu 1500 eth3: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.9.7-unRAID x86_64 OpenSSL: 1.0.2j Uptime: 1 day, 17:25:17 Close CPU possibly will not throttle down frequency at idle Your CPU is running constantly at 100% and will not throttle down when it's idle (to save heat / power). This is because there is currently no CPU Scaling Driver Installed. Seek assistance on the unRaid forums with this issue

I'm on 6.2.4 since I have it so I'm confused myself... I'll just remove it and re-install it. Don't worry about messing something up, you and your plugin helped me a ton already!

Hey, So, I’ve been running unRaid for 1-2 months now and I’m loving it so much, I discover new things about it every day or so and it’s so much fun to toy around with. I was browsing the “app shop” for unRaid where I saw a plugin named “Fix common problems”, I give it a shot and wow… I had A LOT of errors… First, herehttp://i.imgur.com/J2NIWHG.png are my internet settings. Now I have bonding on and I kinda know what it does but I seem to run in a lot of problems with openVPN etc because I have bonding, bonding is not the issue but I don’t know how to do certains things because I have bonding (you’ll see later on in the post). Now I think it might be better for my server (Dell r710) to just use 1 port and save myself some hassle, what do you guys think about it? Now onto the real problems: Docker Application NZBGet is currently set up to run in host mode: The template for this application specifies that the application should run in bridge mode. I don’t really know the difference between bridge and host mode (I’ll look it up on the wiki in a secdone, thank jonp for your explanation ) but whenever I put it on bridge mode the webGUI doesn’t load for me and I don’t know why. Docker Application NZBGet, Container Port 6789 not found or changed on installed application: When changing ports on a docker container, you should only ever modify the HOST port, as the application in question will expect the container port to remain the same as what the template author dictated. Might fucked up something here, I don’t even know how to change the container port and I’m sure I only changed the host port Docker Application Unifi is currently set up to run in host mode The template for this application specifies that the application should run in bridge mode. Application Support Thread Docker Ignore Error ^ Docker Application Unifi, Container Port 8080 not found or changed on installed application When changing ports on a docker container, you should only ever modify the HOST port, as the application in question will expect the container port to remain the same as what the template author dictated. I didn’t even change any of the ports here, [screenshot](http://i.imgur.com/Giii9jS.png). Might be something wrong with the plugin? Docker Application Unifi, Container Port 8081 not found or changed on installed application When changing ports on a docker container, you should only ever modify the HOST port, as the application in question will expect the container port to remain the same as what the template author dictated. ^ Docker Application Unifi, Container Port 8443 not found or changed on installed application When changing ports on a docker container, you should only ever modify the HOST port, as the application in question will expect the container port to remain the same as what the template author dictated. ^ Docker Application Unifi, Container Port 8843 not found or changed on installed application When changing ports on a docker container, you should only ever modify the HOST port, as the application in question will expect the container port to remain the same as what the template author dictated. ^ Docker Application Unifi, Container Port 8880 not found or changed on installed application When changing ports on a docker container, you should only ever modify the HOST port, as the application in question will expect the container port to remain the same as what the template author dictated. Fix this here: DockerApplication Support Thread ^ Before you read this please don’t hit me… I once had a port open for my raspberry pi to ssh in and forgot my unraid server was on the same ip… So I had ssh port open to the internet and I saw [this](http://i.imgur.com/7d4bDDt.png) and I’m so happy I have a good password and this plugin totally saved my ass because otherwise I never would’ve known so thanks Squid. I’ve removed the ssh port to the internet and will that mean they can’t do it ever again? Maybe I need to blacklist their IP? And because this spammed my syslog I got this error: /var/log is getting full (currently 60 % used): Either your server has an extremely long uptime, or your syslog could be potentially being spammed with error messages. A reboot of your server will at least temporarily solve this problem, but ideally you should seek assistance in the forums and post your diagnostics (I will upload these if I have to). Your CPU is running constantly at 100% and will not throttle down when it's idle (to save heat / power). This is because there is currently no CPU Scaling Driver Installed. Seek assistance on the unRaid forums with this issue I’m not really sure what this one means but is my server is sitting at 4% so that means this is wrong right? Conclusion: I have A LOT of problems, I fixed the SSH port immediately and I hope you guys can help me out a bit… Sorry if I might sound lazy/stupid but I’m not lazy just way too stupid

So I'm new to unRaid and I still need to learn a ton but I'm a little confused about something, so I have 1 disk in my array (that's a 4TB WD Red) and I just got a new disk (2TB WD RE4) which I installed, preclear and I've added it to my existing array. Now I have a share called "Media" where I store all my movies etc. and I read that unraid "balances" the data between the array so 1 disk is not getting filled but more "spread out". How does this work exactly? I've added a lot of movies but my new drive is still empty (and the disk is included on the share) so my question is: Did I fuck up my settings and is everything on a static disk or will the "dynamic" part kick in later? Pic: http://i.imgur.com/iKeMNvd.png

I had same issue. After change it to bridge i can see the web gui. Damn it worked... Should've tried that myself, thanks mate Sent from my SM-G935F using Tapatalk

I've setup openVPN but I cannot acces my webui (host and privilged are on), is there a way to acces it but have my server on bonded lan connections? Do I NEED to unbond them and connect it to eth0 to use openVPN?