Shazam1203

No, DMZ is disabled on router. Only port forwarding I had enabled was ftp - port 22 tcp

weird. Closed ports now.. Funny though that port wasnt open. I need a better firewall

CPU - i7 4790K 16 GB DDR3 1600 MSI Z97S SLI Krait Motherboard SanDisk Ultra USB 3.0 32gb for unraid os Hard drives listed above and here are diagnostics attached tower-diagnostics-20170121-1934.zip

So it looks about right now - diskspeed.sh for UNRAID, version 2.6.3 By John Bartlett. Support board @ limetech: http://goo.gl/ysJeYV /dev/sdb (Disk 1): 155 MB/sec avg /dev/sdc (Disk 2): 124 MB/sec avg Disk 1 is the Toshiba Any ideas where my bottleneck is then? at times sabnzbd will crawl down to 1MB/s and web UI of plex, sonarr, radarr will not refresh etc. And I get sabnzbd stopping every 5 minutes or so. This is a new install

I agree lol. Do you suggest a different way to test the drive speed?

I copy and pasted straight from hdparm test that unraid faq suggests. hdparm -tT /dev/sda

I have 2 disks in my array so far Toshiba 3TB HDWD130 WD Red 4TB The toshiba is the first drive in the array and I have noticed my docker containers keep crashing so I did a disk speed test on the toshiba 7200rpm- Timing cached reads: 34150 MB in 2.00 seconds = 17097.55 MB/sec Timing buffered disk reads: 230 MB in 3.02 seconds = 76.27 MB/sec On the WD Red - 5400rpm Timing cached reads: 34654 MB in 2.00 seconds = 17350.52 MB/sec Timing buffered disk reads: 586 MB in 3.01 seconds = 194.81 MB/sec Something doesnt seem right here. SMART reports both drives good. Do you guys think I have a drive going out here? Also I ran these test with nothing running and array stopped Thanks!

I have a windows 8.1 embedded vm and I am trying to passthrough my nvidia gtx 960ti but nothing shows on display. I tried changing bios setting to intel gpu as primary and also did the override in vm settings but still not working

Ok that makes sense. I guess best option then would be plex in a vm with gpu passthrough?

ok I did but shouldnt the docker container automatically update to 1.4 as I have plexpass

Nevermind im an idiot haha. I can see version number is changed in plex. LOL Is there any way to tell if the hardware acceleration is working now. I was able to turn hardware acceleration on.

It wont let me send PM for some reason but here it is below - root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="plex" --net="host" --privileged="true" -e TZ="America/Los_Angeles" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -e "VERSION"="xxxxxxxxxxx" -v "/mnt/user/storage/Media/":"/mnt/user/storage/Media/":rw -v "/mnt/user/appdata/plex":"/config":rw linuxserver/plex 6690f40c9605b3053cd88b267d8d236343c3cf113029f82a19162bd3ec9e3253 The command finished successfully!

I got the problem sorted out yesteday, my vpn was acting up. I have another question though. I have plexpass and was trying to updated to 1.4 but I added the version in the docker settings but it wont update

Thanks for the help! I have attached run command and docker log docker_log.txt run_command.txt

I was having an issue with plex not wanting to play anything in my library so I removed the container and added it back with blank config but it could not find server settings. I disabled docker and removed docker image and tried again but it still wont find server settings when I go to web ui any ideas? Diagnostics are posted tower-diagnostics-20170116-1417.zip