ridge

Bumping this potential issue with certain files just not converting.

Output below: root@REDACTED:/# ffprobe -show_streams -print_format json "/library/tv/Terror, The/The.Terror.s01e02.Gore.Bluray-1080p.Remux.mkv" ffprobe version 4.3.1-Jellyfin Copyright (c) 2007-2020 the FFmpeg developers built with gcc 9 (Ubuntu 9.3.0-17ubuntu1~20.04) configuration: --prefix=/usr/lib/jellyfin-ffmpeg --target-os=linux --extra-version=Jellyfin --disable-doc --disable-ffplay --disable-shared --disable-libxcb --disable-sdl2 --disable-xlib --enable-gpl --enable-version3 --enable-static --enable-libfontconfig --enable-fontconfig --enable-gmp --enable-gnutls --enable-libass --enable-libbluray --enable-libdrm --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libdav1d --enable-libwebp --enable-libvpx --enable-libx264 --enable-libx265 --enable-libzvbi --enable-libzimg --arch=amd64 --enable-opencl --enable-vaapi --enable-amf --enable-libmfx --enable-vdpau --enable-cuda --enable-cuda-llvm --enable-cuvid --enable-nvenc --enable-nvdec --enable-ffnvcodec libavutil 56. 51.100 / 56. 51.100 libavcodec 58. 91.100 / 58. 91.100 libavformat 58. 45.100 / 58. 45.100 libavdevice 58. 10.100 / 58. 10.100 libavfilter 7. 85.100 / 7. 85.100 libswscale 5. 7.100 / 5. 7.100 libswresample 3. 7.100 / 3. 7.100 libpostproc 55. 7.100 / 55. 7.100 { [matroska,webm @ 0x564e89a02180] Could not find codec parameters for stream 4 (Subtitle: hdmv_pgs_subtitle (pgssub)): unspecified size Consider increasing the value for the 'analyzeduration' and 'probesize' options Input #0, matroska,webm, from '/library/tv/Terror, The/The.Terror.s01e02.Gore.Bluray-1080p.Remux.mkv': Metadata: encoder : libebml v1.3.6 + libmatroska v1.4.9 creation_time : 2018-08-23T21:19:22.000000Z Duration: 00:42:35.62, start: 0.000000, bitrate: 30726 kb/s Chapter #0:0: start 0.000000, end 232.899000 Metadata: title : Chapter 1 Chapter #0:1: start 232.899000, end 263.597000 Metadata: title : Chapter 2 Chapter #0:2: start 263.597000, end 832.707000 Metadata: title : Chapter 3 Chapter #0:3: start 832.707000, end 1240.906000 Metadata: title : Chapter 4 Chapter #0:4: start 1240.906000, end 1724.932000 Metadata: title : Chapter 5 Chapter #0:5: start 1724.932000, end 2063.728000 Metadata: title : Chapter 6 Chapter #0:6: start 2063.728000, end 2522.895000 Metadata: title : Chapter 7 Chapter #0:7: start 2522.895000, end 2555.616000 Metadata: title : Chapter 8 Stream #0:0(eng): Video: h264 (High), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default) Metadata: title : MPEG-4 AVC Video / 27477 kbps / 1080p / 23.976 fps / 16:9 / High Profile 4.1 BPS-eng : 27357762 DURATION-eng : 00:42:35.595000000 NUMBER_OF_FRAMES-eng: 61273 NUMBER_OF_BYTES-eng: 8739420240 _STATISTICS_WRITING_APP-eng: mkvmerge v25.0.0 ('Prog Noir') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2018-08-23 21:19:22 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(eng): Audio: truehd, 48000 Hz, 5.1(side), s32 (24 bit) (default) Metadata: title : Dolby TrueHD Audio / 5.1 / 48 kHz / 2604 kbps / 24-bit BPS-eng : 2603495 DURATION-eng : 00:42:35.595000000 NUMBER_OF_FRAMES-eng: 3066714 NUMBER_OF_BYTES-eng: 831684854 _STATISTICS_WRITING_APP-eng: mkvmerge v25.0.0 ('Prog Noir') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2018-08-23 21:19:22 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:2(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 640 kb/s Metadata: title : Compatibility Track / Dolby Digital Audio / 5.1 / 48 kHz / 640 kbps BPS-eng : 640000 DURATION-eng : 00:42:35.616000000 NUMBER_OF_FRAMES-eng: 79863 NUMBER_OF_BYTES-eng: 204449280 _STATISTICS_WRITING_APP-eng: mkvmerge v25.0.0 ('Prog Noir') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2018-08-23 21:19:22 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:3(eng): Subtitle: hdmv_pgs_subtitle, 1920x1080 Metadata: title : SDH BPS-eng : 28801 DURATION-eng : 00:42:00.727000000 NUMBER_OF_FRAMES-eng: 1090 NUMBER_OF_BYTES-eng: 9075139 _STATISTICS_WRITING_APP-eng: mkvmerge v25.0.0 ('Prog Noir') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2018-08-23 21:19:22 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:4(spa): Subtitle: hdmv_pgs_subtitle Metadata: title : Latin American BPS-eng : 27893 DURATION-eng : 00:41:32.282000000 NUMBER_OF_FRAMES-eng: 922 NUMBER_OF_BYTES-eng: 8689949 _STATISTICS_WRITING_APP-eng: mkvmerge v25.0.0 ('Prog Noir') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2018-08-23 21:19:22 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES "streams": [ { "index": 0, "codec_name": "h264", "codec_long_name": "H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10", "profile": "High", "codec_type": "video", "codec_time_base": "1001/48000", "codec_tag_string": "[0][0][0][0]", "codec_tag": "0x0000", "width": 1920, "height": 1080, "coded_width": 1920, "coded_height": 1088, "closed_captions": 0, "has_b_frames": 4, "sample_aspect_ratio": "1:1", "display_aspect_ratio": "16:9", "pix_fmt": "yuv420p", "level": 41, "chroma_location": "left", "field_order": "progressive", "refs": 1, "is_avc": "true", "nal_length_size": "4", "r_frame_rate": "24000/1001", "avg_frame_rate": "24000/1001", "time_base": "1/1000", "start_pts": 0, "start_time": "0.000000", "bits_per_raw_sample": "8", "disposition": { "default": 1, "dub": 0, "original": 0, "comment": 0, "lyrics": 0, "karaoke": 0, "forced": 0, "hearing_impaired": 0, "visual_impaired": 0, "clean_effects": 0, "attached_pic": 0, "timed_thumbnails": 0 }, "tags": { "language": "eng", "title": "MPEG-4 AVC Video / 27477 kbps / 1080p / 23.976 fps / 16:9 / High Profile 4.1", "BPS-eng": "27357762", "DURATION-eng": "00:42:35.595000000", "NUMBER_OF_FRAMES-eng": "61273", "NUMBER_OF_BYTES-eng": "8739420240", "_STATISTICS_WRITING_APP-eng": "mkvmerge v25.0.0 ('Prog Noir') 64-bit", "_STATISTICS_WRITING_DATE_UTC-eng": "2018-08-23 21:19:22", "_STATISTICS_TAGS-eng": "BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES" } }, { "index": 1, "codec_name": "truehd", "codec_long_name": "TrueHD", "codec_type": "audio", "codec_time_base": "1/48000", "codec_tag_string": "[0][0][0][0]", "codec_tag": "0x0000", "sample_fmt": "s32", "sample_rate": "48000", "channels": 6, "channel_layout": "5.1(side)", "bits_per_sample": 0, "r_frame_rate": "0/0", "avg_frame_rate": "0/0", "time_base": "1/1000", "start_pts": 0, "start_time": "0.000000", "bits_per_raw_sample": "24", "disposition": { "default": 1, "dub": 0, "original": 0, "comment": 0, "lyrics": 0, "karaoke": 0, "forced": 0, "hearing_impaired": 0, "visual_impaired": 0, "clean_effects": 0, "attached_pic": 0, "timed_thumbnails": 0 }, "tags": { "language": "eng", "title": "Dolby TrueHD Audio / 5.1 / 48 kHz / 2604 kbps / 24-bit", "BPS-eng": "2603495", "DURATION-eng": "00:42:35.595000000", "NUMBER_OF_FRAMES-eng": "3066714", "NUMBER_OF_BYTES-eng": "831684854", "_STATISTICS_WRITING_APP-eng": "mkvmerge v25.0.0 ('Prog Noir') 64-bit", "_STATISTICS_WRITING_DATE_UTC-eng": "2018-08-23 21:19:22", "_STATISTICS_TAGS-eng": "BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES" } }, { "index": 2, "codec_name": "ac3", "codec_long_name": "ATSC A/52A (AC-3)", "codec_type": "audio", "codec_time_base": "1/48000", "codec_tag_string": "[0][0][0][0]", "codec_tag": "0x0000", "sample_fmt": "fltp", "sample_rate": "48000", "channels": 6, "channel_layout": "5.1(side)", "bits_per_sample": 0, "dmix_mode": "-1", "ltrt_cmixlev": "-1.000000", "ltrt_surmixlev": "-1.000000", "loro_cmixlev": "-1.000000", "loro_surmixlev": "-1.000000", "r_frame_rate": "0/0", "avg_frame_rate": "0/0", "time_base": "1/1000", "start_pts": 0, "start_time": "0.000000", "bit_rate": "640000", "disposition": { "default": 0, "dub": 0, "original": 0, "comment": 0, "lyrics": 0, "karaoke": 0, "forced": 0, "hearing_impaired": 0, "visual_impaired": 0, "clean_effects": 0, "attached_pic": 0, "timed_thumbnails": 0 }, "tags": { "language": "eng", "title": "Compatibility Track / Dolby Digital Audio / 5.1 / 48 kHz / 640 kbps", "BPS-eng": "640000", "DURATION-eng": "00:42:35.616000000", "NUMBER_OF_FRAMES-eng": "79863", "NUMBER_OF_BYTES-eng": "204449280", "_STATISTICS_WRITING_APP-eng": "mkvmerge v25.0.0 ('Prog Noir') 64-bit", "_STATISTICS_WRITING_DATE_UTC-eng": "2018-08-23 21:19:22", "_STATISTICS_TAGS-eng": "BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES" } }, { "index": 3, "codec_name": "hdmv_pgs_subtitle", "codec_long_name": "HDMV Presentation Graphic Stream subtitles", "codec_type": "subtitle", "codec_time_base": "0/1", "codec_tag_string": "[0][0][0][0]", "codec_tag": "0x0000", "width": 1920, "height": 1080, "r_frame_rate": "0/0", "avg_frame_rate": "0/0", "time_base": "1/1000", "start_pts": 4671, "start_time": "4.671000", "disposition": { "default": 0, "dub": 0, "original": 0, "comment": 0, "lyrics": 0, "karaoke": 0, "forced": 0, "hearing_impaired": 0, "visual_impaired": 0, "clean_effects": 0, "attached_pic": 0, "timed_thumbnails": 0 }, "tags": { "language": "eng", "title": "SDH", "BPS-eng": "28801", "DURATION-eng": "00:42:00.727000000", "NUMBER_OF_FRAMES-eng": "1090", "NUMBER_OF_BYTES-eng": "9075139", "_STATISTICS_WRITING_APP-eng": "mkvmerge v25.0.0 ('Prog Noir') 64-bit", "_STATISTICS_WRITING_DATE_UTC-eng": "2018-08-23 21:19:22", "_STATISTICS_TAGS-eng": "BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES" } }, { "index": 4, "codec_name": "hdmv_pgs_subtitle", "codec_long_name": "HDMV Presentation Graphic Stream subtitles", "codec_type": "subtitle", "codec_time_base": "0/1", "codec_tag_string": "[0][0][0][0]", "codec_tag": "0x0000", "r_frame_rate": "0/0", "avg_frame_rate": "0/0", "time_base": "1/1000", "start_pts": 0, "start_time": "0.000000", "duration_ts": 2555616, "duration": "2555.616000", "disposition": { "default": 0, "dub": 0, "original": 0, "comment": 0, "lyrics": 0, "karaoke": 0, "forced": 0, "hearing_impaired": 0, "visual_impaired": 0, "clean_effects": 0, "attached_pic": 0, "timed_thumbnails": 0 }, "tags": { "language": "spa", "title": "Latin American", "BPS-eng": "27893", "DURATION-eng": "00:41:32.282000000", "NUMBER_OF_FRAMES-eng": "922", "NUMBER_OF_BYTES-eng": "8689949", "_STATISTICS_WRITING_APP-eng": "mkvmerge v25.0.0 ('Prog Noir') 64-bit", "_STATISTICS_WRITING_DATE_UTC-eng": "2018-08-23 21:19:22", "_STATISTICS_TAGS-eng": "BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES" } } ] }

Still getting a few stray files (and an entire show) that gets this error: 2022-04-06T00:07:16:DEBUG:Unmanic.Plugin.reorder_audio_streams_by_language - File unable to be probed by FFProbe - '/library/tv/Terror, The/The.Terror.s01e02.Gore.Bluray-1080p.Remux.mkv' It does it for Plugin.reorder_subtitle_streams_by_language, Plugin.encoder_audio_aac, and Plugin.encoder_video_hevc_nvenc, which is what I use across my entire collection. Permissions are the same as everything else (folders to 777, files to 666, nobody:users are owner and group)

Never mind....a quick restart of the docker container later, and here's a much more debug-esque log. Just the relevant lines attached. It's probably worth mentioning that the directory is 777 nobody:users, and all the files are 666 nobody:users, just like every other directory in TV Shows. debug.txt

If you enable debugging, you will get a better view of why it's not being added in the logs. With debugging enabled: 2022-03-25T22:20:01:INFO:Unmanic.UnmanicLogger - Debug logging enabled 2022-03-25T22:20:08:INFO:Unmanic.LibraryScannerManager - [FORMATTED] - Running full library scan on library 'TV (specific shows)' 2022-03-25T22:20:08:INFO:Unmanic.FileTesterThread-0 - [FORMATTED] - Starting FileTesterThread-0 2022-03-25T22:20:08:INFO:Unmanic.FileTesterThread-1 - [FORMATTED] - Starting FileTesterThread-1 2022-03-25T22:20:11:INFO:Unmanic.FileTesterThread-0 - [FORMATTED] - Exiting FileTesterThread-0 2022-03-25T22:20:11:INFO:Unmanic.FileTesterThread-1 - [FORMATTED] - Exiting FileTesterThread-1 2022-03-25T22:20:11:WARNING:Unmanic.LibraryScannerManager - [FORMATTED] - Library scan completed in 2.7737667560577393 seconds

An odd one: I have a TV show that doesn't want to be scanned. The show is named the same format as everything else in my TV shows library, is H264 like everything else before I convert it, but when it's scanned nothing gets added to the pending jobs nor appended to the log, except to say a scan has happened. The shows aren't in the converted history (as having been done/scanned previously), and a restart of the app doesn't seem to fix it. Here's the relevant lines in the log: 2022-03-25T20:01:32:INFO:Unmanic.LibraryScannerManager - [FORMATTED] - Running full library scan on library 'TV (specific shows)' 2022-03-25T20:01:32:INFO:Unmanic.FileTesterThread-0 - [FORMATTED] - Starting FileTesterThread-0 2022-03-25T20:01:32:INFO:Unmanic.FileTesterThread-1 - [FORMATTED] - Starting FileTesterThread-1 2022-03-25T20:01:34:INFO:Unmanic.FileTesterThread-0 - [FORMATTED] - Exiting FileTesterThread-0 2022-03-25T20:01:34:INFO:Unmanic.FileTesterThread-1 - [FORMATTED] - Exiting FileTesterThread-1 2022-03-25T20:01:34:WARNING:Unmanic.LibraryScannerManager - [FORMATTED] - Library scan completed in 2.9104015827178955 seconds For reference, the show in question is "The Terror".

Ah sure enough. I had a bunch of null keys in there. I moved it to a backup, restarted the docker, the settings.json recreated with the correct values and we're golden again. Thanks!

On version 0.2.0~a3bd45a, and I'm getting the attached screenshot happening. Constantly trying to load the page sections with no success. Cross-browser. On hitting the Rescan Library button, I get "An error was encountered while requesting a library rescan". Nothing of relevance in the Unmanic logs themselves, but the docker log showed this: [services.d] starting services [services.d] done. 2022-03-12T21:51:23:INFO:Unmanic.UnmanicLogger - Debug logging enabled 2022-03-12T21:51:23:INFO:Unmanic.UnmanicLogger - Initialising file logger. All further logs should output to the 'unmanic.log' file Exception in thread LibraryScannerManager: Traceback (most recent call last): File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/local/lib/python3.8/dist-packages/unmanic/libs/libraryscanner.py", line 97, in run if int(self.settings.get_schedule_full_scan_minutes()) != self.interval: TypeError: int() argument must be a string, a bytes-like object or a number, not 'NoneType' Exception in thread LibraryScannerManager: Traceback (most recent call last): File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner self.run() File "/usr/local/lib/python3.8/dist-packages/unmanic/libs/libraryscanner.py", line 97, in run if int(self.settings.get_schedule_full_scan_minutes()) != self.interval: TypeError: int() argument must be a string, a bytes-like object or a number, not 'NoneType'

Thanks to you both. Is there a reason the tool isn't taking the files from my backup zip to create the new flash though? Doesn't seem very intuitive, so I suspect a problem with my zip, but without an error message, it's impossible for a novice to know.

I'm going through needing to replace my flash drive right now. It's gone into read only mode again, after already running chkdisk on it a couple of weeks ago. My new (Samsung Bar Plus) drive arrived today. This is the first time I'm replacing the flash drive since licensing unRAID in 2011, so I'm nervous, and the USB Flash Creator tool isn't helping my nerves. I ran the tool with my current zip backup (from yesterday) as the version, it wrote VERY quickly, but the flash drive doesn't have much on it when it's done. Just the config, EFI, and syslinux folders, with no bzimage, bzmodules, bzroot, etc files on it at all. And no explanatory text other than "Writing Done!" in the tool. If I wipe it and select Stable, sure enough I get the full install on the flash drive. Is this normal, expected behavior, or am I doing something wrong? Is my backup corrupt? Worst case, can I use a fresh install and then replace config with the one from my backup zip? Do I still need to run make_bootable.bat in this scenario? Thanks!

Not sure what that nginx reference is, as I'm running nginx as a docker, and (to my knowledge) nowhere else. What would you suggest trying here?

A couple more troubleshooting steps I tried: Changed port to 80. No joy. Changed IP address of server to something else on the same subnet that's outside of my DHCP range. Still no joy. Swapped out network cable. No joy. Ordered a new USB stick which arrives tomorrow. If there's anything else I could be trying, I'm all ears at this point...

I'm not using it for remote access purposes yet. In fact I was prepping to switch over to using that, but hadn't gotten around to it.

I've now tried to change the port to 8480 by editing ident.cfg via SSH and rebooting. Still no joy. Same error message. I'm completely dead in the water at this point.

UPDATE: I followed the posts below and read to delete the /boot/config/ssl folder, and reboot. That worked, and I now have web GUI access again. Thanks! Weird problem: I can't seem to get access to the web GUI at all after a reboot. I can SSH in just fine, but the GUI isn't loading, even by choosing GUI mode on a reboot with a monitor connected. Same thing happens in Safe Mode boot (both with and without GUI). I've tried from multiple computers with multiple browsers all connected to the same subnet the server is on. I have the port set to 8008 for my web GUI which has worked great for years (a docker container uses port 80), now I get "unable to connect" or "connection refused" (depending on the browser) for http://IP:8008 Any ideas what might be going on? I've attached the output of the diagnostics command here. Thanks! gallifrey-diagnostics-20210719-1150.zip

I was getting the same error, so I deleted and reinstalled the docker. Only to get this error message on install: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='deemix' --net='bridge' -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'ARL'='REDACTED' -e 'PUID'='99' -e 'PGID'='100' -p '6595:6595/tcp' -v '/mnt/cache/download/music/':'/downloads':'rw' -v '/mnt/cache/appdata/deemix':'/config':'rw' 'registry.gitlab.com/bockiii/deemix-docker' Unable to find image 'registry.gitlab.com/bockiii/deemix-docker:latest' locally /usr/bin/docker: Error response from daemon: Get https://registry.gitlab.com/v2/: x509: certificate is valid for CN_DNSBL, not registry.gitlab.com. See '/usr/bin/docker run --help'. The command failed.

Yeah it failed for me, both changing the old installation, and creating a brand new one after removing the orphan image when that failed. Error message was: Error response from daemon: Get https://registry.gitlab.com/v2/: x509: certificate is valid for CN_DNSBL, not registry.gitlab.com

I honestly didn't try again until just now. Looks to be working again!

Seems Deemix isn't starting up after working just fine till today. I'm getting a repeating error block in the log as follows: app.initialize(portable) File "/deemix/app.py", line 27, in initialize settings = initSettings(configFolder=configFolder) TypeError: initSettings() got an unexpected keyword argument 'configFolder' [services.d] Starting with ARL INFO:engineio.server:Server initialized for threading. Server-wide ARL enabled. Traceback (most recent call last): File "/deemix/server.py", line 277, in <module> run_server(port, portable) File "/deemix/server.py", line 261, in run_server Let me know if you need any more info. Thanks!

This is solved. For anyone having similar issues, it seems Steam is woefully slow and isn't updating servers properly. It must have taken 6 or 7 full reboots, (and 2 full validations) for the updates to finally take effect.

@ich777I still had the window up: ---Checking if UID: 99 matches user--- ---Checking if GID: 100 matches user--- ---Setting umask to 000--- ---Checking for optional scripts--- ---No optional script found, continuing--- ---Starting...--- ---Update SteamCMD--- Redirecting stderr to '/serverdata/Steam/logs/stderr.txt' [ 0%] Checking for available updates... [----] Verifying installation... Steam Console Client (c) Valve Corporation -- type 'quit' to exit -- Loading Steam API...Failed to init SDL priority manager: SDL not found Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed OK. Connecting anonymously to Steam Public...Generated client id: 4323449528505350018 Listening for IPv4 broadcast on: 27036 Logged in OK Waiting for user info...OK ---Update Server--- ---Validating installation--- Redirecting stderr to '/serverdata/Steam/logs/stderr.txt' [ 0%] Checking for available updates... [----] Verifying installation... Steam Console Client (c) Valve Corporation -- type 'quit' to exit -- Loading Steam API...Failed to init SDL priority manager: SDL not found Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed OK. Connecting anonymously to Steam Public...Loaded client id: 4323449528505350018 Listening for IPv4 broadcast on: 27036 Logged in OK Waiting for user info...OK Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x3) reconfiguring, progress: 0.00 (0 / 0) Update state (0x5) validating, progress: 0.00 (4622 / 11530662157) Update state (0x5) validating, progress: 1.73 (199768871 / 11530662157) Update state (0x5) validating, progress: 3.63 (418003435 / 11530662157) Update state (0x5) validating, progress: 6.24 (719249552 / 11530662157) Update state (0x5) validating, progress: 8.46 (975742866 / 11530662157) Update state (0x5) validating, progress: 9.44 (1088410573 / 11530662157) Update state (0x5) validating, progress: 11.06 (1275808262 / 11530662157) Update state (0x5) validating, progress: 12.09 (1394531878 / 11530662157) Update state (0x5) validating, progress: 13.52 (1558870356 / 11530662157) Update state (0x5) validating, progress: 14.59 (1682884829 / 11530662157) Update state (0x5) validating, progress: 15.71 (1811106799 / 11530662157) Update state (0x5) validating, progress: 16.06 (1851936164 / 11530662157) Update state (0x5) validating, progress: 18.37 (2118530518 / 11530662157) Update state (0x5) validating, progress: 20.53 (2367272923 / 11530662157) Update state (0x5) validating, progress: 23.03 (2655146465 / 11530662157) Update state (0x5) validating, progress: 25.32 (2920106741 / 11530662157) Update state (0x5) validating, progress: 27.71 (3195286400 / 11530662157) Update state (0x5) validating, progress: 30.04 (3464090585 / 11530662157) Update state (0x5) validating, progress: 32.26 (3720245237 / 11530662157) Update state (0x5) validating, progress: 34.77 (4009103049 / 11530662157) Update state (0x5) validating, progress: 37.21 (4290459991 / 11530662157) Update state (0x5) validating, progress: 39.75 (4583832989 / 11530662157) Update state (0x5) validating, progress: 42.32 (4879237620 / 11530662157) Update state (0x5) validating, progress: 44.74 (5159039521 / 11530662157) Update state (0x5) validating, progress: 47.38 (5463151340 / 11530662157) Update state (0x5) validating, progress: 50.17 (5784506529 / 11530662157) Update state (0x5) validating, progress: 52.91 (6101170062 / 11530662157) Update state (0x5) validating, progress: 57.47 (6626627885 / 11530662157) Update state (0x5) validating, progress: 60.01 (6919349134 / 11530662157) Update state (0x5) validating, progress: 62.83 (7244944588 / 11530662157) Update state (0x5) validating, progress: 69.85 (8054007041 / 11530662157) Update state (0x5) validating, progress: 77.02 (8881300964 / 11530662157) Update state (0x5) validating, progress: 79.73 (9193697328 / 11530662157) Update state (0x5) validating, progress: 81.79 (9430630103 / 11530662157) Update state (0x5) validating, progress: 83.36 (9612052366 / 11530662157) Update state (0x5) validating, progress: 84.94 (9793743119 / 11530662157) Update state (0x5) validating, progress: 86.27 (9946967009 / 11530662157) Update state (0x5) validating, progress: 87.89 (10134583727 / 11530662157) Update state (0x5) validating, progress: 89.54 (10324543079 / 11530662157) Update state (0x5) validating, progress: 91.14 (10509249367 / 11530662157) Update state (0x5) validating, progress: 92.77 (10697117002 / 11530662157) Update state (0x5) validating, progress: 94.52 (10898583340 / 11530662157) Update state (0x5) validating, progress: 96.13 (11084354393 / 11530662157) Update state (0x5) validating, progress: 97.96 (11295276311 / 11530662157) Update state (0x5) validating, progress: 99.32 (11451729409 / 11530662157) Update state (0x11) preallocating, progress: 49.45 (1127181791 / 2279390176) Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 0.00 (12426 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 0.00 (80538 / 2279390176) Update state (0x61) downloading, progress: 0.01 (116880 / 2279390176) Update state (0x61) downloading, progress: 0.03 (714892 / 2279390176) Update state (0x61) downloading, progress: 0.32 (7393886 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 0.72 (16448295 / 2279390176) Update state (0x61) downloading, progress: 1.25 (28531248 / 2279390176) Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 2.35 (53660537 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 4.77 (108644503 / 2279390176) Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 5.99 (136539394 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 6.97 (158778879 / 2279390176) Update state (0x61) downloading, progress: 8.09 (184495228 / 2279390176) Update state (0x61) downloading, progress: 10.82 (246684987 / 2279390176) Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 13.81 (314787193 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 16.97 (386831875 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 20.80 (474022879 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 23.70 (540143091 / 2279390176) Update state (0x61) downloading, progress: 26.69 (608341085 / 2279390176) Update state (0x61) downloading, progress: 31.12 (709445280 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 34.39 (783934670 / 2279390176) Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 36.91 (841350753 / 2279390176) Update state (0x61) downloading, progress: 39.74 (905790856 / 2279390176) Update state (0x61) downloading, progress: 42.84 (976488718 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 46.33 (1056065385 / 2279390176) Update state (0x61) downloading, progress: 48.11 (1096528219 / 2279390176) Update state (0x61) downloading, progress: 51.89 (1182835377 / 2279390176) Update state (0x61) downloading, progress: 55.91 (1274346592 / 2279390176) Update state (0x61) downloading, progress: 58.71 (1338198394 / 2279390176) Update state (0x61) downloading, progress: 61.72 (1406863048 / 2279390176) Update state (0x61) downloading, progress: 64.82 (1477428383 / 2279390176) Update state (0x61) downloading, progress: 68.32 (1557229025 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 71.38 (1627110193 / 2279390176) Update state (0x61) downloading, progress: 74.53 (1698817344 / 2279390176) Update state (0x61) downloading, progress: 78.73 (1794517098 / 2279390176) Update state (0x61) downloading, progress: 81.95 (1867931910 / 2279390176) Failed to set thread priority: per-thread setup failed Update state (0x61) downloading, progress: 85.36 (1945660739 / 2279390176) Update state (0x61) downloading, progress: 88.58 (2019029254 / 2279390176) Update state (0x61) downloading, progress: 91.70 (2090103385 / 2279390176) Update state (0x61) downloading, progress: 95.21 (2170216443 / 2279390176) Update state (0x61) downloading, progress: 98.43 (2243506470 / 2279390176) Update state (0x61) downloading, progress: 99.97 (2278726956 / 2279390176) Update state (0x61) downloading, progress: 99.97 (2278726956 / 2279390176) Update state (0x81) running, progress: 7.99 (182039030 / 2279390176) Update state (0x81) running, progress: 15.74 (358849990 / 2279390176) Update state (0x81) running, progress: 24.65 (561830490 / 2279390176) Update state (0x81) running, progress: 33.48 (763159507 / 2279390176) Update state (0x81) running, progress: 42.51 (968984693 / 2279390176) Update state (0x81) running, progress: 51.23 (1167734902 / 2279390176) Update state (0x81) running, progress: 60.23 (1372809655 / 2279390176) Update state (0x81) running, progress: 69.02 (1573187407 / 2279390176) Update state (0x81) running, progress: 76.76 (1749656126 / 2279390176) Update state (0x81) running, progress: 85.51 (1949194412 / 2279390176) Update state (0x81) running, progress: 93.91 (2140585403 / 2279390176) Update state (0x101) committing, progress: 0.00 (0 / 2279390176) Update state (0x101) committing, progress: 4.52 (103114231 / 2279390176) Update state (0x101) committing, progress: 12.83 (292479286 / 2279390176) Update state (0x101) committing, progress: 18.22 (415298262 / 2279390176) Update state (0x101) committing, progress: 37.45 (853641333 / 2279390176) Update state (0x101) committing, progress: 52.19 (1189613320 / 2279390176) Update state (0x101) committing, progress: 74.57 (1699733081 / 2279390176) Update state (0x101) committing, progress: 85.90 (1957920985 / 2279390176) Success! App '376030' fully installed. ---Prepare Server--- ---Server ready--- ---Start Server--- [S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.

Here you go. My files are stored on an unmounted disk rather than the cache disk (because my cache disk doesn't have the space). Another difference I have is a (fully working until this update) "Mods folder" variable, because I run a cluster of 8 Ark servers and don't really feel like having them all have their own individual mod folder, taking up 8x the disk space. This variable centralizes that for me.

Yeah, the game itself is fine. I play on my own and a friend's servers. His (using Ark Server Manager) are fine on 309.42. Appreciate you looking into this.

@ich777I remembered the validate option just after I posted (of course I did, isn't that how it always goes...). Unfortunately it's come back with the same version number as before (307.6).

I apologize if this issue has been mentioned before, but with 46 pages in this thread on various game servers it's difficult to go through everything. The Ark docker appears to not be updating the servers correctly. Before trying to update to the latest (309.42) they were on 309.4, but after a restart they show as being on 307.6, which means none of my players can connect. Relevant docker log doesn't show much detail. Connecting anonymously to Steam Public...Loaded client id: 15143523430996911231 Listening for IPv4 broadcast on: 27036 Logged in OK Waiting for user info...OK Success! App '376030' already up to date. ---Prepare Server--- ---Server ready--- ---Start Server--- [S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed. Setting breakpad minidump AppID = 346110