-
BigDaddyMoe started following 6.9.2 - Ready to give up! (Unmountable: not mounted) , Dynamix File Manager , Unraid 6.12.10 - HTTP 500 Error and 1 other
-
Unraid 6.12.10 - HTTP 500 Error
I updated from 6.12.6 of that means anything......
-
Unraid 6.12.10 - HTTP 500 Error
I have the same problem after updating to Unraid 6.12.10! I was unclearing a disk and am afraid to manually restart the server. Any suggestions? The server is running, I have access to all drives, just not the web user interface to get to the controls. Log in and get the error.
-
assistance with read errors
under Fix Common Problems I have the following: disk4 (WDC_WD60EFRX-68L0BN1_WD-WX22D80FH53R) is disabled disk4 (WDC_WD60EFRX-68L0BN1_WD-WX22D80FH53R) has read errors /var/log is getting full (currently 100 % used) Any suggestions or direction on what to do? Thank you! tower45tb-smart-20220218-1311 (1).zip tower45tb-diagnostics-20220218-1319.zip
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
If I tried mounting this from a linux machine would I have better luck trying to get access to my data? root@Tower45TB:~# btrfs-find-root /dev/sdc1 Couldn't read tree root Superblock thinks the generation is 24 Superblock thinks the level is 0 bad key ordering 0 1 leaf free space ret -5563, leaf data size 16283, used 21846 nritems 243 leaf free space ret -5563, leaf data size 16283, used 21846 nritems 243 leaf free space incorrect 30490624 -5563 Well block 30408704(gen: 9 level: 0) seems good, but generation/level doesn't match, want gen: 24 level: 0 Well block 30654464(gen: 8 level: 0) seems good, but generation/level doesn't match, want gen: 24 level: 0 Well block 30638080(gen: 7 level: 0) seems good, but generation/level doesn't match, want gen: 24 level: 0 Well block 30556160(gen: 5 level: 0) seems good, but generation/level doesn't match, want gen: 24 level: 0 root@Tower45TB:~# ___________________________________________________________________________________________________ root@Tower45TB:~# btrfs restore -v /dev/sdc1 /mnt/disk2/restore checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super root@Tower45TB:~# _______________________________________________________________ root@Tower45TB:~# btrfs restore -v /dev/md3 /mnt/disk2/restore checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super root@Tower45TB:~# __________________________________________________________ root@Tower45TB:~# btrfs restore -vi /dev/md3 /mnt/disk2/restore checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super checksum verify failed on 21790720 found 000000CE wanted 00000078 checksum verify failed on 21790720 found 000000CE wanted 00000078 bad tree block 21790720, bytenr mismatch, want=21790720, have=0 Couldn't read tree root Could not open root, trying backup super root@Tower45TB:~#
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
Didnt work I can get the array started but Disk 3 shows Unmountable: not mounted yet the parity rebuild made writes to the disk and it is green square. I'm in safe mode and Check Filesystem Status says See Disk Settings.
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
THANKS Will try
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
Disk 6 shows up now.
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
I dont understand why I cant enable disk 1 if unraid finds it, and it mounts on other systems, shouldnt i just be able to choose it in the drop down and it should mount? THANKS
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
Not what I wanted to hear:( Any other thoughts on how to get data off of Disk 3 if I can't get it to mount anywhere? Do you think the disk is fried if I cant mount it anywhere? I thought 10TB WD Red Pro I wouldnt have to worry about it, Disk one that mounts, makes a loud grinding noise on occasion.
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
I think I have determined that BOTH of my 10TB WD Red Pro Disks failed. Disk 1, I was able to access on a windows machine with a Linux driver. Disk 3 which is listed as missing on Unraid , I could not get to mount on the windows machine. Question, is there a way I can turn off disk 1, which does not have much data on it. And then use the Disk 1 disk in place of the Disk 3 and restart array and have Parity Disk rebuild Disk 3? Or any other thoughts on how to get data off of Disk 3 if I can't get it to mount anywhere? THANKS in advance.
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
Thanks for the reply, power cables or sata cables? I switched to a new controller and now have another disk missing! tower45tb-diagnostics-20211024-1125.zip tower45tb-syslog-20211024-1616.zip
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
I do not want to lose all my data, years worth of work.
-
6.9.2, Array stopped, stale configuration, Everything I do turns to crap, It just keeps getting worse.
Damn they are new disks. I replaced the SAS board and now I have an additional drive missing! This is crazy! I have attatched files if you can provide any insight it would be much appreciated! tower45tb-diagnostics-20211024-1117.zip tower45tb-syslog-20211024-1616.zip
-
6.9.2, Worked for a week, now "Unable to write to disk1"
Any other advice?
-
6.9.2 - Ready to give up! (Unmountable: not mounted)
Any other advice?
BigDaddyMoe
Members
-
Joined
-
Last visited