JPDom1

Members
  • Posts

    58
  • Joined

  • Last visited

Posts posted by JPDom1

  1. 9 hours ago, jonp said:

    Ok, I took another look at your system diagnostics.  First let's try this.  If you have another USB flash lying around, please download and install the latest Unraid release onto it (not NVIDIA build) and try and boot your server using that (remove your primary USB and set aside during this test).  The sole purpose of this is to determine if a stock configuration of Unraid loads correctly or not.  You have a lot of plugins installed that could be causing issues, so this is a way to verify whether or not that is the case here.  Alternatively you can try booting Unraid in safe mode.

    Hi @jonp,

    I am happy to do this just want to know if I do this will my array be persistent if I put all the disks back or will it remember my array or should I not start it with any of my current array disks ? Never done a Vanilla Flash drive always wanted to start over without losing data on the array.

  2. Morning,

     

    Sorry for my confusion I was posting as I was finding information.

    I am back on the original docker.img with docker2.img I could not load from the template so switched back to the original docker file.
    I have also deleted more than half my containers and only left with what I feel is important still no fix.

     

    On the Network side I found out that changing the network settings to static without a default gateway gives me the response from the GUI 
    I would expect but still not working just the long loads are gone. If i put it to automatic or even put a default gateway in I am back to
    waiting ages for dockers to appear on the dashboard.

     

     

    I took your advise and stopped the array then turned off the docker service to test.
    made no difference.

     

    Below is a screenshot of my network settings. It is vanilla as I deleted the network config and rebooted Yesterday for the 4th time.

    All I have done here is set the DNS servers and IP address.

     

    Everything has internet but the Host OS.

    Cannot ping anything from the server.

     

    image.thumb.png.5439e626456712ac1f84fcf349dc53e9.png

     

    What else can I do please ?

  3. Played with network settings a bit,

     

    use static IP everything is back to normal (speed) but still no apps, docker tab loads instantly Not sure why as I do have a reservation against the MAC address.

    Putting the default gateway in makes it really slow again. Taking it out with a static IP makes it error instantly.

    No matter what DNS address I put it does not make any difference.

    Rebooted the router and then unRAID with static IP, No gateway & 1.1.1.1 as my DNS.

     

    Community applications now show this.image.thumb.png.f0534da74e58122c000a5d60d416f58d.png


    This is with a static IP, No default gateway and 1.1.1.1 as my DNS.

     

    Server cannot ping anything on the network not even my router.

    All docker containers and VM has internet access just not the host OS.

  4. 10 hours ago, trurl said:

    All of these symptoms are indicating your server can't reach the internet.

     

    From the server command line, can you ping github.com?

    @trurl, No cannot ping Github.

    root@Mufasa:~# ping github.com
    ping: github.com: Name or service not known

    Saying that I deleted network.cfg and rebooted made no difference.

     

    My SABNZBD is still downloading and my plex & bitwarden is still accessible from the outside world.

     

    5 hours ago, Squid said:

    Because you have quite a number of containers that have the default "?" icon.  When loading the dashboard / docker tab, the system will attempt to try and download the icons.  This is the delay that you're seeing, since it keeps on failing.  Once it succeeds, there will never be a significant delay

     

    @Squid, All the container did have images. This all started after I clicked "update all" on the docker tab and I think it is one of those containers below that says Created "10 days ago" that might have caused it as those are the ones that updated then my problems started

     

    image.thumb.png.72a9a29fbe549824da7af8601f7dd4cd.png

  5. Right got more info......

     

    I got pi**ed off and walked away....Came back and 

     

    image.thumb.png.e3eaa28eb0286f30e66a42fc81eac701.png

     

    Was happy to see my containers and VM again.

    Clicked on apps but still nothing. Went back to Dashboard and nothing loaded.

    So left it 

    Then left it some more and it came back.

    Then decided to run it on a stopwatch to see how long it takes.

    And as you can see below. When I refresh my browser it takes 1 minute 40 seconds for it to load my containers in my dashboard.

    Any reason for this ?

    image.png.8ceb5915e9f810bd6f53a2dfbe61b561.png

    image.png.61d9ee8e4ba58f7ae131d2a0ff56a16b.png

    image.png.d3b2aacec10baf2d4157f7fae1bf1dbb.png

     

     

    So now my problem is,

     

    Community apps still broken.

    Dashboard really slow in loading docker containers. Same on docker tab.

     

    Cannot create new docker.img as they are not pulling down as per my previous post.

     

    @jonp Any reason it takes so long to load ? Also on my last post anything I can do about the containers not pulling from the templates ?

     

  6. Today I went and did more to try and fix things but ultimately still broken.

     

    • Went on my router and removed my DNS settings that points to the unRAID server for SteamCache
    • Rebooted the server with Automatic DNS settings so it can pickup the new settings from the router.
    • Created a new Docker image "Docker2.img" photo below
    • with the new docker image I have access to my dockers again but when trying to load a docker from the templated i get a failure every time see photo below. No errors in the logs assume it is "network"

     

    image.thumb.png.cdc01a1ec157c818c881c6b8873d5051.png

     

    The error I get now when trying to pull a image after

     

    image.thumb.png.58c1cca405268b41064d29be68784c91.png

     

     

  7. This morning I tried to see if my appdata backup/restore plugin will work to restore my containers once I delete the doker.img as community apps is not working for me and also discoved that this plugin is not loading for me ?

     

    Trying to access it through settings -> backup/restore appdata

    image.png.e562b41b06af9d49540440b0c69c870d.png

     

    image.thumb.png.040158b5b8e8544771cb824c5f7e736c.png

     

    Most likely a moo point as my appdata is fine I need the containers installing again after deleting the .img file and for that I will need community apps unless I script it ?

  8. 1 hour ago, jonp said:

    While I can't really comment on the Community Apps issue ( @Squid is the expert there), I can tell you that the warning on the Docker settings page is valid and you need to perform the action requested (delete your Docker.img file and recreate it).

    Thanks for the reply @jonp. Will my containers reappear as I cannot get to community apps to reinstall them ?

    Is it as simple as deleting the docker.img and rebooting and it will create it by itself ?

  9. Still broken,

     

    Just tied DNS settings as per the error message on community apps with 208.67.220.220 & 208.67.222.222 made no difference also tried 8.8.8.8, 8.8.4.4. and 1.1.1.1. My download and plex work to the outside world it is only community apps.

     

    Then on the Docker front I still cannot see it on my dashboard or docker tab.

     

    Can anyone look at my diagnostics and see if they can find why it is doing this PLEASE,

  10. 4 minutes ago, Squid said:
    
    DNS_SERVER1="192.168.0.100"

    What is this IP?  Make sure that what ever it is is "whitelisting" any requests from the server...

     

    Side note, assuming you're using something like piHole to get rid of ads, there's zero reason to use it for the server, as there's no ads anywhere within it.

    Hi, Thanks for the quick reply.

    It is SteamCachebundle container IP. (Need to upgrade it to the LanCache at some point)

    It also has a DNS built in that I point to 1.1.1.1

  11. Evening fellow unRAIDers,

     

    I got my a new motherboard last week and swapped it out (RMA replacement) Identical models. 

    Gigabyte X399 AORUS PRO-CF.

     

    Now I do not know if it is because of the motherboard or something else (Like Github going down Yesterday) but my Docker containers are no longer appearing on the dashboard or Docker tabs.

    My Community applications also no longer works.

    I have had the Motherboard now 5 days and I think this issue has been here for the last 3 days so confident it is not related ?

    All my containers are running(Docker PS output below) and I can access them but cannot administer any of them through the GUI

    Here are some screenshots.

    Diagnostics also attached.

     

    Apps tab showing this.

     

    image.thumb.png.b997ae86169bf83c10d806ba5f9394c3.png

     

    Dashboard not showing containers or VM's

     

    image.thumb.png.9ebc31e816e06af87c7f69f7da6103e8.png

     

    I can see my VM and containers if I go to Settings -> CPU Pinning.

     

    image.thumb.png.d53ff80260ad0a294123bf5b9d111219.png

     

    I can see my VM in the VM's tab so it is only missing from the Dashboard screen

     

    image.thumb.png.2e0d7f2e06d4bcc385d0793e278a2215.png

     

    The Docker screen just appears to load but never loads my containers.

     

    image.thumb.png.79674637aefb6444cf677c4059ba19eb.png

     

    Docker PS output.

    Interesting it shows all those containers created 3 days ago. I did click on the docker tab and select update all could that have done it ?

     

    image.thumb.png.ce7ea543c1c69edb998674f53c8160cc.png

     

    Settings -> Docker is showing this but it has done this for a very long time always ignored it.

    image.thumb.png.84b8f51caad2814536c6a097de882442.png

     

    What I have tried.

     

    - Reset network.cfg - Deleted the file booted in GUI mode and put my static IP back with all new settings

    - MAC address on router changed for reserved IP address

    -Tried the DNS settings the Apps page suggests

    -Reboot router

    -Backup/restore appdata plugin in settings also does not load it just keeps spinning so cannot rollback the last updates.

     

    Help please 🙂

    mufasa-diagnostics-20200714-1908.zip

  12. Very impressed now I can use my 1080.

    I have done 128 films in 18 hours and saved over 500GB.

    Doing 12 workers at a time running 12 streams on the GPU.

     

    image.png.67c04841b6f73217cdea14c4a618a61e.png

     

    3 Questions.

     

    1. What is the maximum file size the container can handle as I have some 4K films at over 50GB and it looks like it caps 20GB per file ?

    2. I pointed the container to my films and series does it do films first then series after ? That is the way it appears now.

    3. Pointing it to over 60TB of data the GUI is very slow in loading is this the same for everyone else ? (3-5 minutes to load all data) 

  13. unRAID strikes again!

     

    Had great uptime and performance for 10 days.

    Today needed to switch the server off while doing electrical works in the house as a precaution as the UPS is still broken.

     

    Upon powering on within 2 minutes a "failed" drive again!

    image.thumb.png.572af5af36f8e63b38865cd2d27779f4.png

     

    Diag attached.

     

    Array did not want to stop so had to do a reboot from the GUI.

    Disk reported 2056 erros as per the screenshot

    it is now out of the array doing a pre clear. I know the disk is fine unRAID is just a fanny!

     

    Was hoping switching to a 1000W PSU and removing all splitters would solve my issue.

     

    Had enough of this!

    mufasa-diagnostics-20200420-1352.zip

  14. Parity check complete and all disk appear happy now.

    It is 22c in the UK today and my Server is running great.

    Last week with the old PSU when it was 9c outside i had 3-5 disk over 50-55c.

     

    image.thumb.png.144856ee10156cde930101845eae9480.png

     

    Retract my comment on on the Chinese eBay delivery....My 40mm Fans arrived today but now need to get screws for them to go into the heatsink. Might just cable tie it or something. suggestions welcome I got these from evilbay https://www.ebay.co.uk/itm/Small-PC-fan-cooling-heat-sink-computer-case-40mm-12V-2-pin/172498532899?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

     

  15. Both my 6 & 8TB "Dead" drives have now pre cleared and about to put them back into the array for a parity sync.

    image.png.3a779febc3a7f8e3e3cb6610968edc15.png

     

    Also purchased 2x 40mm 12v 2pin fans to put on the H310 cards but as usual it is from China with someone pretending to be in the UK so will have to wait 4-6 weeks for it to arrive 😡😡.

     

    Thank you for the comments @Normand_Nadon I am baffled by the temperature reduction it is amazing me that a sata splitter and molex splitter can cause this much heat. The 650Watt PSU is in my gaming PC now although it is only running a 1080 Hybrid, Ryzen 5 2600, 3 drives and so on it is performing fine.

     

    Will let the Parity SYNC complete and get the coolers on the H310 but hope this means the issue is resolved but only time will tell really....

     

  16. 9 minutes ago, Squid said:

    If you're not using those other 2 x16 slots, you should move one of the HBAs to them.  They get hot under full load.

    Thanks @Squid I was thinking of doing that. I had a P2000 in there and a 10GB nic but took both out as not being utilized and was just going to get a 1060 for transcoding if I can get this issue sorted.

     

    Just an observation I have ordered 4 new 120mm fans for the machine (3x120mm front & 1 rear) as the drives we constantly getting hot (over 50c).

    Today is the hottest day in the UK so far this year and all the drives are 10c cooler than they have been with the old PSU.

    Am I just imaging things here or could the other PSU have been starving the fans of power to spin properly or even worse causing the drives to overheat?

    image.thumb.png.2b089d875063784f7edfd4b878c55d1b.png

  17. OK so I have swapped out the PSU's from my unRAID machine and my Gaming machine. I do not have a Corsair 650Watt as per the original post it is a cooler master 650Watt same as my 1000Watt Cooler Master in my gaming Rig(Photo below of the 2 PSU's).

    Put the 1000W in the unRAID machine and also removed my Sata extenders as I have 16 x Sata connectors on my 1000W PSU. I was also able to remove my Molex splitter as the 1000W PSU molex can reach as I have put the PSU in the top chamber of the case where I had the other one in the bottom (Antec 1900)

     

    I turned the unRAID box back on and let it do the Pre clear on the 2 "Dead" drives. I have also plugged all drives into my Dell H310's now so none of them are on the motherboard at present. Photos below.

     

    But as it is a lovely 20c in Isolation today we decided to have a BBQ (Last photo) so the Gaming PC is still in bits and will put it together tonight or tomorrow.

     

    For now the unRAID machine is showing 0 errors so will wait and see how it goes over the next week as I need to do the Pre clear then add the drives back into the array and do a parity SYNC.

     

    Fingers crossed.

    20200405_111258.jpg

    20200405_114731.jpg

    20200405_125041.jpg

    20200405_114431.jpg

    20200405_135946.jpg

    • Like 1