JPDom1

@binhex - This works great thank you. Have created accounts for all my friends and it is working flawlessly with my DDNS entry so i can use it outside of the home network.

Thank you for the quick reply Johnnie.Black, Reason i am confused is that it filled up DISK3 (4TB) to 25% and moved back to DISK 1. was it not suppose to fill that disk 3 to 50% before going back to DISK 1? and when will it stop writing to DISK 1 as it is sitting on 75% used now? Will also change the share for TV shows back to HIGH-Water.

Hello community, I have searched for an answer on this problem and cannot get anything i try to resolve my problem. My drives are set up as follows. 6TB Parity 2x 6TB Data (Disk1,Disk2) 1x 4TB Data (Disk3) 2x 2TB Data (disk4,Disk5) 256GB SSD cache I ran all my shares on High-Water with my split level set to Automatically split any directory as required. It all ran great until about 2-3 weeks ago. This might be due to me changing to a new rig or could be due to me having a corrupt flash and having to restore from a back up. What is happening now as per the image is my Disk1 (6tb) all my downloads keep being moved there and it did split to Disk 2 till it reached 3TB then went on to disk 3 till it reached 1TB and it should still be filling disk 3 till 2TB then move to DISK 4 but it is not and i cannot understand why? I have now switched my series share to Most-Free hoping it will start filling the 2x2TB drives as they have no data on them and it is not it is still writing to disk 1. I see some data has been written to DISK 2 but this seems random and i cannot see a patern. Disk 3 has had no data written to it in over a week and disk 4 & 5 has never been written too not even under most-free. I have attached Diagnostics if someone who knows how to read into this can please help me understand why this is happening? could this be due to docker setup in some way? I run, Plex Transmission Sonarr (Switching back to SickRage now as Sonarr keeps giving import errors) CP Jackett Headphones tower-diagnostics-20170322-0522.zip

Hello, I need help with my post processing on Headphones. It downloads fine but when I attempt to post process all i get out of the log is 2017-02-18 19:47:52 INFO Found no folders to process. Aborting. 2017-02-18 19:47:52 INFO Force checking download folder for completed downloads Attached is a photo of my setup Docker setup /downloads /mnt/cache/Downloads/Complete/music/ /music /mnt/user/Music/ /config /mnt/user/appdata/headphones I am sure with a fresh pair of eyes my mistake will stand out.

Did a lot of digging and it would appear my "tower kernal: mptbase: ioc0: warning - issuing reset from mpt_config!!, doorbell-0x2400000" is pointing to my SAS drive or SAS controller as my motherboard has 2 chip sets on it with 14 SATA slots so i am going to remove the SAS drives and run nothing on the SAS controller and see what happens. Currently the SAS drives run my cache so i will do the mover to get all my stuff off the cash and go from there. I will report back tonight

Apologies johnnie.black i miss understood you. I will do this when i get home. Any idea why I then get this in my log? "tower kernal: mptbase: ioc0: warning - issuing reset from mpt_config!!, doorbell-0x2400000" Not sure if the 2 were related but hopefully recreating the docker image it will get rid of the one problem

This means there are problems with the docker image, you should delete and re-create. Thanks for the reply johnnie.black I am not sure which docker it is causing this as the system runs fine until i run Plex or Emby and watch something. saying that at the same time my NZBGET is downloading at 6MB/s so not sure if it is bottle necking the connection. I will look into this when i get home.

Hello all, I am new to this community and currently in my trial attempting to get it all running properly. I have had a lot of help setting my server up through this forum however now it is time for me to get some help if i can please. My server is run on a HP XW8600 with 2x Xeon E5430, 8GB DDR 2 667 buffered ram. Unraid is the latest version i downloaded last week. Active dockers :NZBGET, Couche potato, headphones, Sick Rage, EMBY/Plex. Everything runs OK i do not have an issue until i watch something on the TV(Chronecast) through Plex/Emby I did it first with Plex and then Emby as i was not sure if it was Plex but now I know it is transcoding or something causing my issues. After about 10 minutes of watching a program it freezes on the TV or on PC no matter where i watch it within the APP. (Works fine just watching the file in classic player on PC) Symptoms of Server, 1st time became unresponsive the GUI will not respond just frozen. Telnet was OK. SMB shares go offline. all apps stop. system log goes crazy. Had to hard power down and then parity check to continue 2nd time exactly the same but WEB GUI was responding but when ever i attempt to start a docker i get "Execution error server error" so it is running but i cannot start any dockers. Troubleshooting, I run 2 HP 146 10K SAS drives in my cache pool and with the "BTRFS: error (Device loop0)" errors i am getting on the server monitor is there an issue with my cache pool? is transcoding causing issues with these drives? should i move appdata and system onto the array as they are set to "preferred" at the moment(only things on the cache is appdata and system) Log file why does it spam "tower kernal: mptbase: ioc0: warning - issuing reset from mpt_config!!, doorbell-0x2400000" I have no idea what this means? see screenshot my entire log is full of this after the crash. resolution, Do I attempt to run without cache pool? (transcodin on cache issue) Images are here : Could only upload 1 as per the 320KB maximum Any help will be gratefully appreciated