feraay

So it’s the expected behaviour that boot fail with xmp enabled ?

Hey, i got a little struggle. My RAM supports 6000mhz and without xmp the clock is set to 4800mhz. so I thought ok enable xmp. I have two options on the ASUs z790 xmp1 and xmp2. With the one I get a KERNEL PANIC - NOT SYNCING VFS: UNABLE TO MOUNT ROOT FS And with the other xmp option I get BZIMAGE CHECKSUM ERROR. I don’t really want to overlock just want to run ram and cpu supported clock speed. when I set ram to 6000mhz without xmp the system boots and with default 4800mhz I have also no problems. would be really thankful for any advice. thank you greetings 🖖

Hey, two of my Containers are only updatable with force Update. I don't know why. One is from the Community Applications added and one from Docker hub. All other Containers work normaly from CA and from Docker hub. I don't understand it. thanks in advance.

disabled Preserve user defined networks and IPv4 custom network on interface br0 (optional) in Docker Settings and its seems the problem is gone now.

Hello, i am have strange network issues a few days now. from inside Docker: root@471259259a65:/# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=6 ttl=118 time=7.08 ms 64 bytes from 8.8.8.8: icmp_seq=7 ttl=118 time=8.46 ms 64 bytes from 8.8.8.8: icmp_seq=8 ttl=118 time=8.00 ms From 172.16.8.99 icmp_seq=9 Destination Host Unreachable From 172.16.8.99 icmp_seq=10 Destination Host Unreachable from Unraid host: root@Mycroft:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. From 172.16.8.99 icmp_seq=1 Destination Host Unreachable From 172.16.8.99 icmp_seq=2 Destination Host Unreachable From 172.16.8.99 icmp_seq=3 Destination Host Unreachable from laptop same router PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: icmp_seq=0 ttl=119 time=8.018 ms 64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=7.467 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=119 time=7.821 ms ssh to Unraid works. shares are working. WebGuis of Docker apps are accessible. I really don't get it. Started just out of nothing and its not permanent after a few minutes its working again. Completely random. If you need anything just let me know. root@Mycroft:~# ifconfig bond0: flags=5443<UP,BROADCAST,RUNNING,PROMISC,MASTER,MULTICAST> mtu 1500 ether d8:bb:c1:a5:e6:5d txqueuelen 1000 (Ethernet) RX packets 19572 bytes 5635331 (5.3 MiB) RX errors 0 dropped 98 overruns 0 frame 0 TX packets 13595 bytes 6960821 (6.6 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.8.99 netmask 255.255.255.0 broadcast 0.0.0.0 ether d8:bb:c1:a5:e6:5d txqueuelen 1000 (Ethernet) RX packets 18876 bytes 5321146 (5.0 MiB) RX errors 0 dropped 986 overruns 0 frame 0 TX packets 10821 bytes 6778539 (6.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 A Lot of dropped packets on bond0 and br0. mycroft-diagnostics-20221012-1141.zip

It’s kind of funny if you read in the Plex Forum they say since Build 1.28.1 HA is broken because of an Update of Intel IHD driver Plex Forum and for us 1.28.1 is better then 1.28.0 don’t get it.

yes your are right. Working for me too.

with Plex Docker 1.28.0.5999 from yesterday HA enabled and HA encoding enabled I don't get the Problems till now. If I enable HDR Tone Mapping its over. On the second play it dies again 3 13:59:20 Mycroft kernel: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:1:8ed9fff2, in Plex Transcoder [14897] Aug 3 13:59:20 Mycroft kernel: i915 0000:00:02.0: [drm] Resetting rcs0 for stopped heartbeat on rcs0 Aug 3 13:59:20 Mycroft kernel: i915 0000:00:02.0: [drm] Plex Transcoder[14897] context reset due to GPU hang Aug 3 14:01:10 Mycroft kernel: i915 0000:00:02.0: [drm] Resetting vcs0 for preemption time out Aug 3 14:01:10 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:10 Mycroft kernel: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:4:28fffffd, in Plex Transcoder [19028] Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] GPU HANG: ecode 12:4:28fffffd, in Plex Transcoder [19028] Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] Resetting vcs0 for stopped heartbeat on vcs0 Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on vcs0 Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:21 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* Failed to reset chip Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm:add_taint_for_CI [i915]] CI tainted:0x9 by intel_gt_reset+0x26c/0x290 [i915] Aug 3 14:01:22 Mycroft kernel: [drm:__uc_sanitize [i915]] *ERROR* Failed to reset GuC, ret = -110 Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] *ERROR* vcs0 reset request timed out: {request: 00000001, RESET_CTL: 00000001} Aug 3 14:01:22 Mycroft kernel: i915 0000:00:02.0: [drm] Plex Transcoder[19028] context reset due to GPU hang Aug 3 14:01:26 Mycroft kernel: Fence expiration time out i915-0000:00:02.0:Plex Transcoder[19028]:24f0! Aug 3 14:06:30 Mycroft kernel: PMS ReqHandler[17675]: segfault at 0 ip 0000000000000000 sp 000014705a37b1d8 error 14 Aug 3 14:06:30 Mycroft kernel: Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. Aug 3 14:06:54 Mycroft kernel: PMS ReqHandler[31743]: segfault at 0 ip 0000000000000000 sp 000014d23a551f48 error 14 in iHD_drv_video.so[14d237853000+1bdf000] Aug 3 14:06:54 Mycroft kernel: Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.

The I3 is using uhd 730 from last gen so could be a difference. You are right it’s 5 % cpu usage with a 4K movie. As I tested with 1080p I just didn’t see the minimal usage.

So encoding will happen with cpu ? I do not see any cpu usage at all. Don’t get it in which scenario I am encoding ?

I have only use ha when available enabled not ha encoding. tester with encoding and it won’t even play guc hang in syslog. tried hdr tone mapping played a few minutes then crashes. so the only stable option is enable ha when available.

It’s still running … no intel gpu top installed no blacklist no modprob in syslinux conf i am transcoding to ram but I think this is not important for gpu crash. Except that I did not do anything special. @flyize do you have Stil the gcu reset errors in system log like with 6.10 or how is the behaviour?

Nope. At the moment out of the box not plug-in no extra config. I never had to wait 6 hours with 6.10 and old kernel. Server instantly crashed when starting transcode. And we have officiall 5.18 Kernel for two days now so how many times you Heard “look it’s working” before doesn’t really matter I guess. If I get @flyize right only his Plex crashes and you are talking about the server crashes sounds like a different problem in my opinion. i will report tomorrow if it’s still working.

Ok I removed modprob and guc Downloaded one to phone no crash and watching one right now with hw transcoding. till now it still works will report back tomorrow.

Oh Ok I know what u mean. I have no intel gpu top installed. I can check my syslinux conf and post here give me 30 minutes. I will download again a movie to phone and check logs. will report back 😅 ok I have still settings from 6.10 testing in my conf append initrd=/bzroot i915.force_probe=4680 i915.enable_guc=2 completely forgot about it. @ich777 told me to set it i guess. And I have not changed it till then.

No off like I already said 😊 You mean the Plex docker logs ? Nothing special here also no errors in system log. watched the Plex dashboard while transcoding for mobile download cpu usage at 2 percentage so it’s definitely hw transcoding. I did not test hdr tone mapping till now but normal transcode works. why so incredulous?

I tried it and it worked on first try no problem here now with 6.11 RC2

For me it’s working 12900k plex official container and 6.11 rc 1 hw transcoding on but hdr tone mapping off did not test hdr tone mapping 1 day now no crash tested a few movies no problems here

In my Optionen this thread is not really for alder lake users. we have at least 3 different type of problems here some older cpus where the system hang occurs every few days a problem with Plex itself and intel stuff and alder lake which is for sure not official supported with the actual used 5.15 kernel I guess would be a lot easier if we stop mixing problems with each other only because the outcome is the same

But UHD730 should already supported even with 5.15 Kernel it’s last gen or I am wrong?

Ah ok it’s not the first time I read that 12400 works may the Igpu is already supported UHD-Grafik 730 Is also on the 11400 so the igpu support is may better

Thought the same may hdr Tonemapping? @michaeldt do you have enabled hdr tonemapping? does the whole system crash or just the Plex container? thx

Something new ? we are all curious 😅 it’s still up?

just wondering so you are the only person on the planet alder lake igpu works for Plex transcoding with an 5.15 kernel. may you can explain your steps here: or here: https://forums.unraid.net/bug-reports/prereleases/69x-610x-intel-i915-module-causing-system-hangs-with-no-report-in-syslog-r1674/page/4/?tab=comments#comment-18072 how did you managed to get alder lake igpu driver support with Kernel 5.15? thanks.

Do you pass through the igpu to Plex container and use hardware transcoding?