chalas
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by chalas
-
-
10 hours ago, ich777 said:
Then it won't work since the game can't guess wich ports you have choosen to be forwarded.
You have to physically enter the ports in the corresponding files or you enter it in the Game Params with the right format.
I think this should do the trick:
?Port=7780?QueryPort=7781
if you have the port set to 7780 and query to 7781
EDIT: LINK
You, sir, are a gentleman and a scholar.
Thank you.
- 1
-
19 hours ago, ich777 said:
Have you also changed the ports in the variables/configfiles to the corresponding variables of the newly created ones?
The only thing I found was the RCON TCP port in the user settings in, I fixed it and it still doesn't show
-
Hello all,
First and foremost: Thank you for your time and work on this docker. My first ARK server has been working great.
Now, to the issue; I tried to make a second server, but it is not showing up in the server browser. I created a new container using the first server as template. It is still set to bridge. I chose a different folder for the Server files and kept the same steamCMD folder. I deleted all port fields and created new ones with the new ports for the server.
Am I missing something? I know the new ark server was created and installed, by looking at the files in the appdata folder. Nothing shows up in ARK server browser.
Thank you!
-
15 hours ago, johnnie.black said:
It's a know issue with some Marvell controllers, this might help, though they are still not recommended.
Thanks that worked for me, thanks.
-
Hi all,
I updated to 6.8.3 and I all my "unassigned disks" have disappeared. I used to use them with Unassigned Devices for various things on VMs. These disks (1 HDD and 1 SSD) don't show up when I stop the array to try to assign them to it. It is like they are not detected at all. They were working correctly when I updated, so I don't think it is a hardware issue.
Has anyone had this issue? Attached is the diag log.
Thanks in advance
-
1 hour ago, Squid said:
You got it. Not sure if its related to the lagging, but its not good either way...
Ok. I found that the USB wireless lan I am using with the cameras VM is the problem. I tried to change it to another USB port, but I still feel it is causing issues.
I will try the other VMs without it to see if the lagging got corrected.
-
8 minutes ago, Squid said:
Your /tmpfs is full:
Whether or not that's directly related to your lagging. Your syslog is being spammed with
Which is USB related.
You're going to have to reboot, then open up a tail of the syslog (log button on the UI). Once those messages start occuring, start pulling out usb devices until you nail down which device is causing the issue then possibly locate it onto another USB controller
Thanks for the quick answer. Just so that I have this clear. After rebooting I will have to open the syslog, wait for the messages to start and unplugging each USB device. When I unplug the problem USB the messages will stop, right?
-
Hello all,
My trial is expiring in the next few days so I am hoping I can get this resolved before that. My setup:
Unraid Version: 6.3.2
2x E5-2690 (turned off HT to see if it helped, didn't)
ASRock Rack EP2C602
32 gb ram
R9-295x2, 980 TI
PCIe to USB adapter
2 USB hubs
250gb SSD
2x 5TB HDD (For Media storage)
2x 2TB HDD (Steam library)
2X 480gb SSD (1 for VM3 and 1 for VM4)
124 GB USB disk
VM Setup:
VM1: Security cameras software recording to USB stick
VM2: Browser/torrent machine
VM3: 295x2 gaming
VM4: 980 TI gaming/streamer
My VMs started to lag since several days ago. When it lags, I have noticed the following behaviors:
All VMs lag at the same time.
HDD usage goes up to 100% (may or may not be related) less than 1mb usage, while RAM and CPU don't show anything abnormal.
Playing Far Cry primal, the game runs perfectly until I need to see the map, load a new area, see the game menu.
When the lag happens I can still click on stuff, like change chrome tabs or open the start menu, but of I try to go to a website or open a program it takes a while.
Any help or ideas will be appreciated. Diagnostics file is attached.
vega 64 (saphire) passthrough not working
in VM Engine (KVM)
Posted
I am also having a lot of problems with a VEGA 64. I'm about to give up lol. Unfortunately I also upgraded to ryzen, so I don't know if it is a problem related to the card or Ryzen